I forgot my router password, what should I do?
What to do if you forgot your router password is a common question for many users who have forgotten or lost their data. What to do in this situation? Recovering the key is easy. It all depends on which network password and login were lost. If it's a local network issue, i.e. in your router, then there are no serious difficulties to restore it.
If the user has forgotten the Wi-Fi router password, he needs to act as follows:
1) in the lower right corner of the toolbar on the desktop you need to find an icon in the form of a ladder or a monitor:
2) if these icons are not visible on the panel, then you need to click on the icon with two checkmarks, which is located next to the display of the current language on the keyboard (RU or EN);
3) after the required previously described shortcut appears, you must point the cursor at it and press the left mouse button;
4) after the list of available connections appears, point to the line where the home network is indicated and click the right mouse button;
5) in the small window that appears, you must select the “properties” option;
6) in the new “properties” window that opens, in the security tab, check the box next to the line “display entered characters”;
7) in the same window, in lines with dots, the login and password information for logging into the router will be displayed.
English version
Video with visual instructions here:
You need to select the “Settings” item and click on the “Wireless Settings” line. At your request, a new modal window will open in which you should select the “Manual Wireless Network Setup” item.
Then fill in the required lines with the data and you can start using the wireless network. In the line “Wi-fi Protected Setup”, you should uncheck the line: “Enable”. This way, you will avoid problems with devices that do not support the technology. In the last paragraph “Pre-Shared Key” enter the network key.
After setting the parameters, click the button: “Save Settings”. The router will then automatically reboot and be up and running.
Restoring an Administrator's Domain
In addition to those users who have lost access data to the local network and the Internet, there are also those who manage to lose access to the administrator page (the home page of the router). In this case, there is no chance to recover lost information and change the settings of the network device. On forums there is often a question like: “I forgot my admin login and password. What do i do?". It is easier to reset the settings on the network device and re-create a new local network. To reset the router parameters, just press and hold the button on the rear panel in this position for several seconds.
In this case, the lights on the front panel of the device will go out for a while, and then start working again. The button itself is located in a small hole to prevent accidental reset, and it can only be pressed using an additional device, which can be a match, a needle, a pin, etc.
Recovery methods
The router settings will be of no use if the user loses the access keys to the administrator page, router, local network and the Internet. In this case, each of the access keys will be restored differently. The main methods are hardware and software. The hardware method of restoring access involves checking the settings on the router’s home page, while the software method relies on the use of a software registry and special work applications that scan all information on the computer about network use. When hardware recovery to the network is required, at a minimum, you must have a login and password for the administrative page on which all the parameters and settings of the local network and Internet connection are generated. To enter the administrator page, you need to type the manufacturer’s IP address in the address bar of your Internet browser.
The P address can be found on a sticker located on the bottom of the router.
If there is none, then the home addresses of the routers look like this: D-link 192.168.0.1 Zyxel 192.168.1.1 Asus 192.168.1.1 Netgear 192.168.1.1 TPlink 192.168.1.1
After logging in to the appropriate router address, the user will see an interface with many settings and network parameters. In order to find out data on the local network, you need to enter the “local network” tab. This tab may also be called a wi-fi network or have similar names.
After which the user should find the “wpa key” parameter. Opposite it will be the router access password.
Password and access to the router are not everything. In addition to the local network login key, you may also need login information for the provider's domain. This data is also specified in the network device settings.
To do this, after fixing the data on access to the local network, you need to go to the “Internet” tab, where not only the parameters and connection technology will be indicated, but also the data on logging into the Internet.
Most often, the login and password are located next to the “account settings” or “connection settings” line.
Restoration by utility (program)
In addition to the hardware method of eliminating the problem of loss of identification data when logging into the Internet and local network, there is also a software method. It is used by professional users and is not suitable for helping beginners. Thus, the participation of a second user with a higher level of knowledge in the field will be required.
With the software method, the following working applications are used to help restore the necessary data using logins and access passwords: 1) Dialupass; 2) Remote Desktop PassView; 3)RouterPassView; 4) WirelessKeyView; 5)Wireless Password Recovery.
And this is not the whole list. These programs themselves are amateur developments, and not the result of the work of professional teams, so the interface of these programs is not always convenient and understandable for a beginner. But if the user nevertheless decides to take independent action, then he needs to be prepared for the fact that most links to such work applications may contain malicious software.
Throughout the entire operation of the profile program, an antivirus with the maximum possible set of functions must be running on the computer to search and detect the login and password from the network in order to prevent infection of your personal computer and damage or theft of personal data.
The operation of such programs is based on the basic principles of the operating system, which, in turn, records every step of the user in the electronic information space. In this case, a register is formed that describes all actions performed recently. They will be stored as encrypted files until all the memory on the hard drive is full.
It is impossible to open these files without special knowledge and professional skills. Not a single program known to many users will be able to read them and display the necessary information on the computer screen. In this case, special applications are needed to help reveal encrypted logins and passwords. After appropriate use of the program, the PC owner will be able to independently use both local and Internet networks in the future. But we must not forget that all access keys to networks must be saved, both in the form of a regular file with printed text, and in written form, so as not to experience significant difficulties in connecting in the future.
Model overview
The main characteristics of the Dir model 615 router are the same as most routers in this segment.
Features include
- DHCP server support,
- additional network protection,
- dynamic DNS,
- connection to the provider’s VPN server, firewall
- and many others, which will be discussed below.
It can be controlled using a mobile device running Android or iOS.
Appearance
The Dir equipment is a small box with rounded corners. The body is black. At the top there are two antennas for the Wi-Fi network. On the reverse side there are: a WAN port for connecting a network cable from the provider, four LAN ports for connecting devices to one local network.
Connection and preparation for work
To prepare for operation and launch of the D-Link router, all necessary parts are included in the package. First, unpack the box with the equipment, take it out and connect the power cable. The next step is to carry out preliminary configuration for its operation with the Internet.
What is it for
Any router can fail. Password reset is used if:
- Forgot your password;
- incorrect settings;
- the provider has changed;
- to change home network settings.
What to do first
Try to gain access using the standard login and password values that were set. Most often this is “admin”. The values are written on the device below. Look at the sticker with this information.
When reset, all device settings will change. The router will have to be configured again.
Resetting settings via the web interface
This method involves using the software provided by the manufacturer to be able to reset old settings to default configurations. The method is fast and simple, as it is done in a few clicks on the computer. To reset the settings, you must:
- Launch any browser, enter the local IP address of the router in the address bar field - 192.168.0.1 (in rare cases - 192.168.1.1). Press Enter to continue.
- On the open page you need to log in. If the login/password on the D-Link router has been changed, enter a new one. Otherwise, the manufacturer leaves the authorization values on the device body: usually this is admin. At the bottom of the router there is a sticker with the login values, as well as the local IP address of the device.
- The design of the developer software differs in different firmware versions. For the new update option you must: Open the System section in the menu bar, click on the Configuration subsection, after which the required tab will open. Looking through the fields and buttons, find: Restore To Factory Default, use the Restore device button to reset the parameters.
- For the old version: select the Maintenance item, then the Save and Restore section, click on the Restore device button next to the Restore To Factory Default Settings field. D-Link will reset the settings, after which it is possible to restore the previous configurations of the router and Internet connection in the web interface.
Model overview
The considered line of routers from D-Link has several dozen modifications. D-Link version Dir-615S a1a is the latest model released.
Main characteristics of Dir-615S:
- Communication standard 802.11n, frequency range 2.4 GHz.
- The maximum wireless connection speed is 300 Mbis/s.
- Transmitter power 15 dBm.
- Port speed is 100 Mbit/s.
- 4 LAN ports.
- VPN support (4 protocols).
- Information protection WEP, WPA, WPA2.
- Dimensions 174x115x30 mm.
- Weight 226 g.
Appearance
The Dir-615S device comes in a traditional box for the company.
It shows the router itself, there is a description of the ports and buttons, some characteristics and information about the manufacturer. The router package includes the device itself, power supply, patch cord, instructions and warranty cards. Dimensions of Dir-615S 175х123ъ32 mm excluding antenna length. Each of the two antennas is 17 cm in height. The router is made of glossy black plastic, and there are LED indicators on the front. The number of ports is the same as its predecessors. There are connectors for power, Wi-Fi, WPS, Internet or LAN ports. There are no USB ports.
- Setting up d-link routers for the ttk network
The lower part is made of matte plastic. There are ventilation grilles at the ends. Dir-615S is mounted on legs and is also available for wall mounting.
The antennas are non-removable and have two degrees of freedom. Gain 5 dBi. Between the antennas there is a switch, power ports, LAN port, WAN port and WPS button.
The Dir-615S looks stylish, but the only design shortcomings include the glossy surface, which collects dust and is easily scratched.
Connection and preparation for work
Connecting Dir-615S to a computer via an Ethernet adapter:
- Dir-615 is connected via LAN ports.
- Connect the D-615S router to a power outlet using the power adapter.
- Click On/Off on the back panel of the router.
- Turn on the computer, open the browser.
To enter the web interface, use the standard IP address of the Dir-615 Internet gateway - 192.168.0.1. The default username and password is admin.
After the first login, you will be asked to set a new password. After this, you can begin setting up the modem.
Hardware reset of D-Link DIR-300 to factory settings
Review and configuration of the D-Link Dir-320 modem
The router can be reset by hardware, by mechanical operations on the device when there is no access to the web interface due to a lost password or technical problems. There may be a software failure or the device is not connected correctly.
On the D-Link DIR-300, resetting settings using this method is simple and will take a little time.
The method replaces the D-Link DIR-300 with factory settings and allows you to reset the password to the web interface to the standard one. To do this you need:
- Check the power supply of the DIR-300 router from D-Link. If it is disconnected, connect the device to the mains.
- Find the Reset button on the back of the router and hold it until all the front panel indicators light up (10-20 seconds). If Reset is slightly pressed inside the case, it is recommended to use a thin, non-sharp object (match, wire) to avoid damage that could lead to the inability to reset the settings using hardware methods, and therefore the operation as such.
- D-Link will automatically begin rebooting and resetting configurations. The standard login and password for the web interface will be restored. You need to go to the browser, go to the authorization page, enter the default values - admin - and configure the router’s Internet connection.
Conclusion
The Dir-615S router is an inexpensive device with basic functionality, suitable for undemanding users. To set the necessary parameters, there is a simple and convenient built-in interface in two languages. Dir-615S is easy to use and comes with various wireless Internet features.
pros
The router has the following advantages:
- High quality case.
- Easy to use.
- Availability of "Yandex.DNS".
- Quick setup.
- Price.
- Connection up to 100 Mbps.
- Possibility of wall mounting.
Minuses
The following disadvantages are noted:
- The glossy surface is susceptible to dust accumulation and scratches.
- The length of the network cable is only 60 cm.
- Fixed antennas.
- Small functionality.
- Lack of USB ports.
- Lack of simultaneous operation in two ranges.
Hard reset
Connecting and setting up a D-Link DIR model 620 router
There may be situations where the methods described above are ineffective, in which case there is a so-called hard reset. This method is different in that it clears settings and user data from both regular and non-volatile memory. A large amount of useless “garbage” accumulates in the cell; it usually cannot be completely removed. To reset your router you need to:
- Check the power supply of the D-Link DIR-300.
- Hold the Reset button until the moment indicated below.
- Half a minute after pressing Reset, turn off the power to the device by pressing the Power button.
- After turning off the D-Link router (the indicators on the front panel do not work), count 30 seconds and turn on the router by pressing the power button.
- As soon as the router is activated,
Connect to the computer
The connection is very simple. First, we screw on the antennas, they have the most common threads, then we take out the Internet cable from the computer and plug it into the wan socket on the D Link DIR 615. Setting up the first connection should be done via cable. There is usually a sticker next to the wan socket, unhook it, behind it are 4 identical ports. Use the supplied cable to connect one of the ports to the computer. Which of the four ports to choose is up to you to decide; now they are of equal value. On the computer we plug the cable into the socket where the Internet used to be. We connect the power supply to the power connector. Everything we need for the initial setup is ready. We plug the plug into the socket and wait for the router to boot. At the same time, turn on the computer if you haven’t done so before.
Equipment
When purchasing such a device, we need to make sure that everything we need for initial work is already included in the package. It’s not very pleasant to buy a router, bring it home and realize that now you need to go get a cable, because when you turn on the D Link DIR 615 for the first time, configuration is carried out only via the network cable. The special case of setting up via Wi-Fi is not suitable for the first time - the network is disabled.
But the package contains everything we need for the first time: a cable for connecting to a computer, a pair of antennas, a power supply for the network, the device itself and a disk with programs. Also a whole bunch of papers, guarantees and, most importantly, instructions in Russian. There is also a special stand: the router can be placed on its edge so that it takes up less space on the table.
Start setting up
So, we connected the cables, turned on the computer, the router, but now there is no Internet - however, we don’t need it at first. You will need instructions for D Link DIR 615. The settings in the instructions are quite detailed, so we will use them.
We turn the pages to Russian (it is usually the second language in the brochure) and begin to configure. First you need to tell the router how to set up the Internet. To do this, you will need the settings provided by your provider upon connection. However, if your Internet connection is via adsl-modem, the settings will be significantly simplified. Now turn on the browser and enter the following numbers in the address bar: 192.168.0.1. The router receives this address at the factory, perhaps we will change it later.
In the login window that appears, enter the required data. They are in the instructions, but for this router they are ordinary: admin in both fields. Press “Enter” to confirm and get to the main screen of DIR 615. The settings of all parameters are displayed here. You can configure it in semi-automatic mode using the buttons on the left, but it’s better to check and make all the settings yourself. Click “Advanced settings” in the lower right corner and proceed to the step-by-step setup. Usually the language is picked up correctly. If it is not Russian that opens, you can correct it using the button on the far right.
MTS router dlink Dir-615 N1 recovery and firmware
Procedure for flashing / restoring the MTS Dlink dir615 router:
0. Download firmware for the router: https://ftp.dlink.ru/pub/Router/DIR-615_A/Firmware/1.
You can try resetting the router: Turn off the router, hold down the reset button without releasing it, turn on the router, and hold it for another 4 seconds after turning it on. After this, the router will reboot (see indication) and turn on with the settings reset.2. We enter the router into “failsafe update” mode. To do this, we connect the router with a LAN cable to the computer (usually the cable is plugged into the LAN connector, for me it worked with the WAN connector). With the router turned off, press the reset button and turn on the router, hold the button for a long time (20 seconds). On your computer, assign the IP address 192.168.0.2.3. In the browser (I used FireFox, but with the next firmware I had to use IE), open the address 192.168.0.1, select the firmware file and perform the upgrade. I used firmware version 2.5.14 and the file from the ftp server 20141125_1634_DIR_615AN1A_2.5.14_sdk-master.bin4. After a few minutes, when the router is updated and boots up, open the address 192.168.0.1 in the browser again, it will prompt you to change the admin password, enter the new password.5. I reset the settings to factory defaults (System->Config->factory defaults)
6. From the router’s web interface, we again update the firmware to version 2.5.28 with the file 20160518_1031_DIR_615AN1A_2.5.28_sdk-mas ter.bin7.
After the update, you need to reset the settings to factory settings again!
8. From the router’s web interface, I updated to the latest version 3.0.1 with the file 2022.12.11-16.56_DIR_615AN1A_3.0.1_relea se.bin9.
For the functionality to work correctly, you need to reset the device to factory settings.
10. In the settings, change the WiFi SSID, WiFi password, disable WPS, fix the WiFi broadcast channel.
Restoration and firmware are complete.
If you have problems connecting some devices via WiFi, while others work fine, you need to try changing the WiFi broadcast channel, and changing the 20/40MHz bandwidth, try the 802.11bg, 802.11b only compatibility mode. If it doesn't help, try the previous firmware.
source
Internet setup
Let’s immediately make a reservation that if the Internet cable is connected to the modem, and not to the DIR 615, the setup is greatly simplified. The difference will be that if the Internet goes through a modem, then in the router you can select a static or dynamic IP, and the rest will be picked up by itself. If there is no modem, we will set up access to the network in the DIR 615 itself. Internet settings are opened by following the Wan link in the “Network” block in the newly opened window. Follow the link and select the connection type. Most providers use PPPoE. Select the connection type in the top field. Then just below the port and name (this is most likely needed for you). In order for your provider to recognize the router and allow it to access the network, sometimes you need to replace the MAC. We do this a little lower in the “Ethernet” section. If you connected the router to the same network through which you previously accessed the network, click the “clone MAC” button. In the figure below it is not labeled; in this firmware version it is located to the right of the MTU -1492 field
In the “PPP” section, enter the user name, password and set the MTU value to 1492. This data is provided by the provider when connecting, and if the MTU value is higher than specified, there may be problems with the network. We set the remaining parameters as in the picture below.
Let’s scroll further, in the “Miscellaneous” block we put two checkboxes: NAT is required, it is also advisable to enable “Firewall” - additional protection when working on the network. This is the same firewall or firewall, but built into the router. They are included in the picture below.
Save all settings by clicking on “Apply”. The main part is done. In a new browser tab, you can open, for example, the Yandex search engine.
Ufanet - Support, Instructions - Ufa
Connect the device to a power source. Insert one end of the patch cord (a network cable crimped on both sides with connectors) into the network card of your laptop or desktop PC, the other into one of the 4 ports of the router (signed either with the numbers 1,2..,4 or lan1,lan2 ..., usually highlighted in a different color). Connect the Internet cable to the WAN (Internet) port
Click Start setting up your router or open a browser (Internet Explorer, Mozilla Firefox, or others), type 192.168.0.1 in the address bar. Click the "Start" button.
Attention! If the router menu does not open, you should reset the router to factory settings. To do this, press the Reset button on the back of the router for 10 seconds, then release. The router will reboot and the settings will be set to default.
Click Yes.
Select "Advanced Settings".
Set an administrator password for the router settings and remember it.
In the "Connection settings"
- Select "WAN" .
- In the "IGMP" item, select "Disable" .
- Click the "Add" to create a new connection.
- Connection type "PPPoE" .
- “Username” and “Password” fields .
- Click the "Apply" button.
Click the "Skip" button.
In the “Default Gateway IPv4” , you need to select a new connection “PPPoE”.
Step #2. Setting up a Wi-fi connection
Under Wi-Fi, select Basic Settings. Enable periodic scanning. Open the Wi-Fi network as shown in the image below.
It is recommended to change the network name.
“PSK Password” field and click the “Apply” button.
In the "Advanced" , open the "IGMP/ALG/Passthrough" item. Set up as shown in the picture below. Click the "Apply" button.
PS Now, to access the Internet, you do not need to click on the shortcut to connect to the Internet on your computer.
Source: https://www.ufanet.ru/pages/router_dlink_615_pppoe/
Wi-Fi setup
If we have a laptop or smartphone, they can also access the Internet through the router. To do this, let's go back to the main settings window of DIR 615. Wi-Fi setup is done in the block, which is called that way. Click on “General Settings” and in the window that opens, select “Enable”.
After saving the changes “Edit”, we will return to the main window. Now in the same block we will follow the link “Basic settings”. Here you need to set the network name (your smartphone will see it when searching for a network). Click “Change” again.
Actually, that’s all, if you live in a private house, the smart device will catch not only next to the router. If you are in an apartment and do not want your neighbors to use your connection, you need to protect it with a password. From the main window, follow the “Security Settings” link. Set the settings as shown in the picture below. Enter your password. Click “Change”.
Now those wishing to connect to your network must provide a password. You will also have to specify it, so you need to save the password.
That, in fact, is all that is needed for normal operation of the DIR 615, the wifi setup is completed, now on your laptop/smartphone you need to try to find a new network and connect to it.
We can put an end to this. You can figure out the stand and try placing the router on its edge. We looked at the main operating parameters of DIR 615. Setting up other parameters is done according to the same principle and is described in detail in the instructions.
Recommendations from professionals
To prevent the loss of data for accessing the local network and the Internet, novice users are recommended to take the following steps: 1) during setup and installation of drivers for network equipment, the program will offer to save a file with backup access data on the PC desktop; 2) after creating the file with network access data, you must copy it to removable media and make another copy in any other folder; 3) after copying the files, you must manually write down on paper all the necessary logins and passwords from the network.
In addition, do not forget that the keys are also freely available for viewing from the computer of the user who configured the router. This data can be seen in the network properties. To do this, you need to find the network connection icon on the taskbar on your desktop in the lower right corner.
Then point the cursor at the name of your home network and press the right button. When a new window appears, select the “properties” option and in the next new window you will be able to see all the necessary keys. Using these tips will reduce the likelihood of complete loss of necessary information for the local Internet network.