The easiest ways to install iTunes on your computer

iTunes is a modern and multifunctional “media combine” from Apple that fills smartphones, tablets and players with the iOS operating system with entertainment content (music, films, books), allowing you to interact with personal data, receive thematic recommendations from the Genius service and notifications about prepared updates. , and at the same time back up and restore lost information. It is beneficial to keep such a useful and almost omnipotent tool at hand, and therefore here are detailed instructions on how to install iTunes on your computer.

Where can I download iTunes?

The Apple media player is downloaded from the official website (and nothing else - you shouldn’t even consider third-party sources, otherwise problems will appear out of nowhere!) in two versions - 32 and 64 bits (more on which version to choose - see the paragraph below!).

Immediately after saving the distribution in the location you like, you can safely start the installation, preferably with administrator rights and in the directory suggested by the system (that is, on drive C, without changing anything, and without offering a new place to unpack files and documents). If you proceed as described above, then most likely the installation will go quickly, and iTunes will work as it should - without any errors, crashes or crashes.

By the way, recently, owners of computers with Windows 10 can download the Apple media player directly from the Microsoft Store digital store. This method has several advantages. Firstly, you don’t have to worry about updates - all important changes are made on the fly automatically without any user interaction.

And secondly, you don’t have to understand the available versions (32 or 64-bit) and choose any settings there. Again, just repeat the algorithm of actions described below and you can safely start interacting with iTunes:

1. The first step is to open the Start menu and enter the search term Microsoft Store in the text field that appears. Click on the shortcut that appears and wait for the digital store to fully load;
2. Use the search again, but this time enter the query iTunes;
3. Open the page with the media player, click “Get”, and then “Download”. Wait for the unpacking and installation operations to complete, open iTunes, log in using your Apple ID account.

iTunes in Microsoft Store

In May 2022, at the Build 2022 developer conference, during the presentation of Windows 10 1709, a slide was shown with iTunes, which will be delivered through the Microsoft Store, which will make it possible to use the player on Windows 10 S and this will reduce the number of problems associated with installation on Windows 10. The Store is empty for now, but the developers promise an announcement by the end of 2022.

This is a very good step on the part of both Apple and Microsoft, because expanding the boundaries of various systems begins with providing competitive solutions on their sites, this simplifies the user experience and allows them to expand the boundaries of the system. Microsoft is taking very broad steps in this regard, from Linux in the Microsoft Store to a wide range of mobile applications on various platforms.

How to determine which version of iTunes for Windows is needed - 32 or 64

The bitness of any Windows operating system (XP, 7, Vista, 8, 10) is determined in two ways:

First option

1. The easiest way is to find the “My Computer” shortcut on the desktop, right-click, and select “Properties” in the menu that appears;
2. Within a second, the system will generate an information field describing basic information about the current PC. Among the data about the processor, operating system, and the amount of RAM, data about the bit depth will also appear. This indicator should be used as a starting point when downloading iTunes from the official website.

Second option

If it takes too long to deal with the information panel, and for some reason there is no extra time, then you can use an alternative method for determining the bit depth. Namely, open the contents of drive “C” and find the Program Files (x86) folder in the main directory. If the folder is found, it means the system type is 64-bit. If it is not found, then it is 32-bit.

Installing the free Veency tweak

This utility turns an i-device into a special server to which you can connect remotely. To install you need:

1. Download the Veency program: launch Cydia and find the Veency tweak through the search. When you enter a search query, the store will give you two applications. You need to download Veency with a green icon, and then confirm the installation;
2. Wait for the device to automatically restart;
3. The connection to the device will be carried out via a wireless Internet connection, so we need to find out the IP address of our iPhone. To do this:
   go to the WiFi settings and click on the “i” button circled.
4. Advanced settings will be specified in the window that opens.
5. we need to remember or write down the IP address on a piece of paper.

Installing and configuring the Veency tweak

Next, launch the Google Chrome browser on your computer, open the settings, and then go to the “Extensions” tab. Using the Chrome online store service, we should download the free VNC Viewer extension for Google Chrome, a special platform that works as a server through which you can connect to the iPhone’s remote desktop.

VNC Viewer from Google Chrome

• We launch the program: in the window that opens, in the “address” field, enter the IP address that we found out earlier. We leave the bottom “Picture Quality” field unchanged: the “Automatic” item should be selected in it;
• After this, a pop-up window will appear on the screen in which by pressing the red “Connect” button you will need to confirm your desire to connect to the iPhone;
• We give the same permission on the device itself: as a result, we get full access to the iPhone’s remote desktop, as well as to all its control tools via a PC.

Below the connection process is demonstrated more clearly.

Published by ProfiAppler Don't forget to read the comments, there is also a lot of useful information there. If your question is not answered, but later comments are answered, then your question is answered in the article, respect other people's time.

You may also be interested

How to update iPhone 6S to iOS 12

Installation on Windows XP 7-10

Regardless of which version of the operating system is installed on the computer, the procedure for interacting with the iTunes distribution is always the same. It is enough to run the file with the *exe extension, downloaded from the official website, and then you will just have to act as the installer prompts. First, you will have to quickly review the conditions and requirements, then agree to the choice of the standard directory for installation (on drive C), then click on “Next” several times, and at the end, click “Finish” and start using the media player.

Using the iTunes distribution is really easy - even beginners who have decided for the first time to dilute the number of available programs on a PC will not have any problems - the interface is too intuitive and the functionality is clear. Moreover, the developers have structured the installation procedure in such a way that it is almost impossible to make mistakes!

Is it possible to control an iPhone via a computer?

In fact, there is a really effective method that will allow you to control your iPhone through your computer system.

It’s worth warning right away that at the moment there are many variations of connecting a smartphone to a PC, which involve the use of specialized applications. Unfortunately, the developers of Apple gadgets did not provide such programs in their devices at the hardware level, so you have to resort to proprietary software.

iTunes on Linux

It’s worth making a reservation right away - Linux does not officially support iTunes. And although the media player is still installed using workarounds, getting a full-fledged tool capable of interacting with Apple players, tablets and smartphones is out of the question. Devices are not detected by the system and iTunes. As a result, you can count on the opportunity to listen to music and watch movies.

The installation proceeds as follows:

1. First of all, you will have to take care of downloading and correctly installing Wine (all instructions are given on the official website, and, in general, it is quite difficult to make a mistake);
2. The next step is to install the “ubuntu-restricted-extras” extension package to be able to play files with the AAC and MP3 extension. The package is installed with the command “$ sudo apt-get install ubuntu-restricted-extras” (without quotes);
3. If everything went smoothly, all that remains is to go to the official Apple website and download the distribution kit for 32-bit versions of Windows. (64-bit will not work! The installation will end in the middle!). Before direct installation, the Windows distribution must be converted into an executable file on Linux. For such cases, the command “$ chmod +x iTunesSetup.exe” is suitable, again, without quotes;
4. The final step is to complete the installation, agreeing to the requirements and conditions, and begin direct use.

It is important to remember that iTunes through Wine is a little slower than on Windows, and therefore you should not rush anywhere, furiously pressing all available buttons - the result will not get better, but the system may freeze completely.

And one more thing - after restarting the PC, you should look for the media player in the Wine library in the “Programs” section, this is where all installed software is stored.

Why do you need to control your iPhone via a computer?

Each user who resorts to such manipulation has a number of his own reasons. Firstly, controlling an Apple device via a laptop or PC allows you to enjoy the contents of the miniature phone's screen on a large screen. You can use installed programs, enjoy gaming applications and any media content stored in memory in general. Secondly, many users use this feature to help their friends and relatives solve problems that have arisen with their mobile devices. By connecting your smartphone to the PC screen, you can carry out various manipulations with the interlocutor’s device from a great distance.

Best Way to Record iPhone from Computer

Apeaksoft Screen Recorder is a powerful and professional high-resolution screen recording and snapshot software that is highly recommended for you. You are given options to capture game video, take online movies, record webcam video or take screenshots on your windows. And you can easily record videos in full screen mode or in your desired screen area. All in all, Apeaksoft Screen Recorder, as a free screen recording software, deserves you to download and try it out.

Screen Recorder

• Apeaksoft Screen Recorder can help you record almost all screen videos you want to record, including online games, educational course, Skype calls and so on.
• You are encouraged to highlight the movement of the mouse cursor to make it easier to track when capturing video from the screen.
• This screen recorder can also save webcam videos directly to your computer, even allowing you to chat with friends while recording videos.
• Once you are done with the video, you can export it to MP4 or WMF and share it online or play it easily on most players.

Preparing to install iTunes 12.6.5 business

The media library will need to be restored. I think that now you are using a version higher than 12.6. This means that your iTunes library (files with information about what you have in iTunes) has been updated. If you install iTunes 12.6.5, then it will not be able to read your new library and you will need to restore it to the state of September 13, 2022. Anything that was added/deleted later is considered lost.

iTunes will no longer update itself. You will need to install new versions manually. But this is not a big problem. You can install the update only if something doesn't work for you. At the moment, the iTunes 12.7 update only has reduced functions. iTunes 12.6 can do everything and even more.

Install iTunes 12.6.5 (business)

The first thing you need to do is download the installer:

• iTunes 12.6.5 for modern 64-bit Windows
• iTunes 12.6.5 for 32-bit Windows
• iTunes 12.6.5 for MacOS

Nothing interesting further. Open it, launch it, click next and accept.

Things get interesting when we launch iTunes. Usually a window like this is shown:

New iTunes Library File Warning

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Want to download iTunes now?

I talked about this above. Your library is too new and he can't read it. He suggests installing a new iTunes to read it. But that’s not why we set up the iTunes business? =)

Part 1: How to Sync iPhone/iPad/iPod with iTunes via USB Cable

The easiest way to sync apps with iTunes is with a traditional USB cable. First of all, it does not require an internet connection. Additionally, it allows you to sync data between iTunes and iPhone/iPad faster. This method supports a wider range of data types, including albums, music, playlists, movies, TV shows, books, podcasts, audiobooks, photos, videos, contacts, calendars, and iTunes backups.

Step 1: To connect your iPhone to iTunes, connect your iPhone to your computer using an Apple Lightning cable. Open the latest version of iTunes and wait for your iPhone to be detected (iTunes not recognizing iPhone?).

Step 2: Click the Device icon in the top left corner of the window and click the Summary tab in the left column. Uncheck "Manage music and videos manually" under Options.

Step 3: On the left sidebar, under the Summary section, you can find several options such as Music, Movies, TV Shows, Books, Audiobooks, Photos, and Information. You can go to the appropriate tab and export iPhone notes to iTunes along with other data.

For example, to sync music on iPhone, go to the "Music" tab, check the "Sync Music" checkbox, configure additional options depending on the situation, click the "Apply" button in the lower right corner to confirm the settings. iPhone music will sync with iTunes as soon as you click the Sync button.

If you want to sync movies, TV shows, books, audiobooks, photos, contacts, and calendars, you can find guides here.

Attention : You'd better back up your iPhone music before syncing your iPhone with iTunes, because files saved on your iPhone but not in your iTunes library will be deleted after syncing.

Restoring the iTunes Library.itl library

Close iTunes.

Go to the folder with iTunes Library.itl

MacOS

/Users/[YourUserName]/Music/iTunes

Windows XP

C:\Documents and Settings\[YourUserName]\My Documents\My Music\iTunes

Windows Vista

C:\Users\[YourUserName]\Music\iTunes

Windows 7, 8 or 10

C:\Users\[YourUserName]\My Music\iTunes

We'll make a backup. Rename iTunes Library.itl to iTunes Library.itl.new . You can rename it whatever you want, but I like new - it means that this is a newer media library. You can simply add ones or zeros to the name. As you wish.

Previous iTunes Libraries there . Among them we find a media library older than September 13, 2017. In my case, it was the library from September 13: iTunes Library 2016-09-13.itl. Move it to the folder above so that it is together with iTunes Library.itl.new and rename it iTunes Library.itl . Now iTunes will try to use this file when it starts and will detect the “native” library from September 13 in it.

This is what my iTunes Library file looks like

Easily use and manage iOS devices from Windows

There are definitely other apps that offer at least some of the functionality offered by the apps I've mentioned here. However, in my experience, these two apps offer the best feature set and price. Moreover, they are also very fast. Especially with screen mirroring on Wormhole.

So, are you interested in using your iPhone through your Windows PC? Let us know in the comments along with any other apps or methods you think we should discuss here.

Post Views: 6

Correcting the menu

After launching the Programs will not appear. You need to select “Edit menu...” and check the box next to “Programs” .

For programs to appear, you need to add them to the menu

Select the newly appeared Programs in the drop-down menu on the left. Here again is the App Store tab.

iTunes 12.6.3 with Applications tab