Critical process died Windows 10: 16 ways to fix the error

• 7shared
• 0Facebook
• 7Twitter
• 0VKontakte
• 0Odnoklassniki

In Windows 8, developers gave the so-called blue screen of death a less frightening appearance, but the essence did not change - one way or another, its appearance often indicates serious problems in the system. There are more than enough reasons for BSOD, but, as a rule, they are all related to either driver errors or problems with the hardware itself. The Critical Process Died error is no exception. It can be caused by hardware faults, registry or file system corruption, and driver problems.

The appearance of a blue screen of death indicating a Critical Process Died error is often observed after connecting/installing new equipment and updating the system, which again indicates a driver failure. In rare cases, problems occur due to a computer infection with viruses. So, how to fix Critical Process Died in Windows 10 or another version of the system?

Reasons for the Critical process died error

The most common reasons for “critical process died” are as follows:

• failure of one of the drivers, which makes further operation of one of the devices impossible;
• damage to system dll libraries (which contain the algorithm for the operation of critical processes);
• the system is infected with viruses, one of which forcibly shuts down critical processes;
• hardware failure (for example, processor, RAM, hard drive);
• Windows software glitch.
  Read also:  What is a clip case for a phone and why is it needed? What is more convenient: a book case or a flip case?

How to fix critical process died on Windows 10

It is not always possible for the user to accurately determine the reason why the critical process died error occurs. Therefore, in such cases, it is recommended to check the technical information one by one. system nodes and the PC itself, failures in which most often cause a “blue screen”.

Super test on the topic “Money” and how can you be friends with it?

Check PC temperature

If the processor or video card overheats, then in order to prevent their failure, they are forcibly turned off, which causes the “Critical process died” error. You can find out the current temperature of components and ways to reduce it using standard programs, as well as additional utilities or widgets.

System Restore

If there is no overheating, then all possible software errors in the operation of the OS, which can cause “Critical process died,” should be excluded. To do this, you must restore the system to its last working state. To do this you need:

1. Go to the control panel

2. In the control panel, select "Recovery".

3. Then select "Start recovery"

4. The OS rollback to working state wizard will open. The user will be prompted to select the latest restore point and return the PC to that state.

5. You need to mark the required restore point and click “Next” to confirm the restoration.

6. If an error occurs when starting the wizard, this means that the function of creating restore points is not enabled on the system. And this method of eliminating the problem is not available.

What instrument are you? Take the test and find out

Remove software

Quite often, the critical process died error begins to appear after installing a program, for example, Skype or GeForce Experience. In this case, it is recommended to remove the programs and check how the system works without them. For this:

1. Go to the control panel
2. Select "Programs and Features".

3. In the next window, click on the “Installed” column. All installed programs will be automatically sorted, the first ones will be those that were last installed by the user. This is where you should start by removing them. Just highlight, call up the context menu and select “Delete”.
   Read also:  Why the computer does not see the video card in Device Manager: what to do?

Can you tell a cringe from a crash? Take this fun test and find out!

Adviсe

To avoid similar problems in the future, you should:

• Carefully monitor the safety of the PC (overheating, dirt, etc.);
• Always check downloaded files for viruses;
• Update drivers on time;
• Download necessary updates;
• Download programs and drivers from official websites.

In any case, there are several ways to solve the problem. First of all, you should try the most obvious ways to solve it. Then move on to more complex methods. Ultimately, if the problem is not resolved, you should take your PC to a specialist.

Driver Update

It’s also a good idea to check for driver updates for all Windows devices. To do this you need:

1. Right-click on the window and select “Device Manager”

2. Expand each device and see if there are yellow triangles next to each device

3. Select a driver update method

Volga or Pobeda? Are you familiar with the Soviet automobile industry? Test yourself in a fun test!

Fixing system files

What can cause dll libraries to become damaged? For example, due to an emergency shutdown of the PC, when the hard drive head does not have time to “park.” But Windows has a built-in utility that allows you to check those same dll files, and if they are found damaged, restore them. And if you believe the statistics, then the Critical process died Windows 10 error most often occurs for this reason.

Checking the integrity of system files

At this stage, it is recommended to check system files for damage. sfc /scannow in a command prompt running as administrator .

If problematic files are found, the utility will restore them. You can read more about checking Windows system files in a separate article.

Hard drive scanning

If the installed hard drive is old (more than 3–5 years old), then it may already have damaged sectors. To scan it, you need:

1. Open My Computer

2. Select each disk one by one and click “Properties” through the context menu.
   Read also:  Find out how many watts the power supply is installed in a PC: several ways
3. Go to the “Service” tab, select “Check”. Click “Check disk” and wait for the process to complete.

4. If the user tries to check the system partition (where Windows is stored), the system will prompt you to reboot the OS. You need to give consent.

Fix Critical process died in Windows 8/8.1/10

And this method will help get rid of the critical process died error if it occurs almost immediately after installing the OS. Most often this happens if an incorrect Windows installation image was used (or it was recorded with errors on a flash drive or DVD) or even pirated.

1. Run command line as administrator.

2. Enter the command: DISM /Online /Cleanup-Image /RestoreHealth and click "OK"

3. Afterwards, reboot the OS (if this does not happen automatically).

Quite often this resolves Critical process died in Windows 8.

Uninstalling the latest Windows updates

If a blue screen occurs after installing the latest OS updates, this means that they are incorrect. This happens, but the user is given the opportunity to manually delete them and restore previous versions of the dll libraries. Need to:

1. Open Settings

2. Go to "Updates"

3. Click “View Log”.

4. There you need to select “Uninstall updates”.

5. After this, restart the PC. Naturally, if after this a request to update the system appears, you should refuse it (at least for 5–10 days, until the Microsoft developers fix the problem).

If all else fails

Reinstalling the system is always the most extreme option to solve the problem, but sometimes you cannot do without it. If Windows 8/10 still boots, you can reset the system to its original state while preserving personal files, or update/restore it by inserting the Windows distribution disk and running the installer executable file.

• 7shared
• 0Facebook
• 7Twitter
• 0VKontakte
• 0Odnoklassniki

BIOS update

If the problem occurs on a new PC or laptop, then it is quite possible that the installed processor is simply incompatible with the motherboard microcode. This can be resolved by updating the BIOS. The user needs to go to the website of the motherboard or laptop manufacturer and download the appropriate installation file to update the BIOS.

And then just launch it and follow the prompts.

Under no circumstances should you turn off the device during the update! Otherwise, you will have to contact the service center.

Standard troubleshooting

Another way to resolve the error is through standard operating system capabilities. To start the process you will need:

1. Go to “Start” - “ Settings ” or press the key combination “Win” + “I”. Next – “ Update and Security ”. The list on the left contains the “Troubleshooting” item.
2. Select "Update centre Windows", run the troubleshooter.

3. The utility will give instructions, the user must agree or follow them - usually everything happens automatically.