Both experienced PC users and novice users who are just learning the mysterious and enigmatic world of Windows OS can encounter Windows Update errors. And it always arises suddenly and unexpectedly.
So, let's try to figure out why this problem occurs and how to fix it yourself without harm to the operating system.
Error code 8024402C - What is it?
When upgrading to Microsoft Windows 10, some users may encounter error code 8024402C.
This error when trying to update is the result of five possible problems. The error code itself is not a critical issue, but while the error occurs, users will not be able to update their Windows software. As with any other Microsoft error code, even if it is not critical, it is recommended that you resolve the error sooner rather than later. A small mistake now can lead to a larger, more catastrophic mistake later. Common symptoms include:
- When you try to upgrade to Microsoft Windows 8024402, a dialog box appears with error code 10C.
- Your current version of Windows may not recognize the need to upgrade to Microsoft Windows 10.
Method 6. Configure Updates Client
Fix it now!
Fix it now!
To repair damaged system, you have to purchase the licensed version of Reimage Reimage.
If none of the previous methods helped to solve the error, you should try following these steps (note that tampering with Windows Registry may damage your system and we are not responsible for any damage caused):
- Open Registry Editor by typing regedit to Run dialogue box (type run into Windows search bar and choose it from the results list);
- Click OK and then Yes in the User Account Control prompt;
- When in Registry, go to HKEY_LOCAL_MACHINE > SOFTWARE > Policies > Microsoft > Windows > WindowsUpdate > AU;
- Double-click on UseWUServe, which is on the right pane of AU key. In the Value data box enter 0 and click OK;Close Registry Editor and try to install updates.
Causes of errors
As stated earlier, there are five main reasons why error code 8024402C occurs.
- Invalid character in proxy override settings
- An incorrectly configured firewall is preventing the update.
- Trying to access a Windows 10 update over a VPN (Virtual Private Network) connection.
- Workstations that run behind a corporate ISA firewall.
- A corporate network system that does not have automatic proxy enabled.
The sooner these known causes are resolved, the sooner you can successfully upgrade to Microsoft Windows 10.
Other resources
If this fix doesn't work for you, here's a brief list of other posts describing different approaches:
- https://windows.microsoft.com/it-it/windows/troubleshoot-problems-installing-updates#1TC=windows-8 (official thread on Windows Support site, also containing a link to the Windows Update Repair Tool).
- https://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/windowsupdate8024402f-windowsupdatedt000/52da75c9-6faf-4082-91ce-996d738b62aeВ (official thread on Windows Community Forums – provide some useful KB insights).
- https://superuser.com/questions/258531/how-to-resolve-windows-update-error-8024402f-on-windows-7-home-premium-64bitВ (useful thread on StackOverflow's SuperUser web platform, containing a lot of useful insights).
- https://www.askvg.com/fix-windows-update-problems-using-automatic-reset-script/ (a Windows Update Agent unofficial “reset script”).
- https://gist.github.com/eeichinger/2003996В (another Windows Update Agent “reset script”).
- https://bhaaratham.com/how-to-solve-error-8024402f-8024402c-windowsupdate_8024402f-windowsupdate_dt000/ (the “DNS Change” approach).
Hope you'll get it fixed.
Additional information and manual repairs
Microsoft Support offers four different solutions to these known issues with error code 8024402C. Some of these methods will be more convenient for home users than others. If you are experiencing this issue in a corporate or business environment, it may be best to ask your IT person or department to try these methods.
Method 1: When your firewall is causing the problem.
- Access your firewall software.
- In particular, examine the settings related to your firewall.
- Make sure the following three websites are listed as exceptions for your firewall or proxy.
- https://*.windowsupdate.microsoft.com
- https://download.windowsupdate.com
- https://*.windowsupdate.microsoft.com
- If any of these websites are not in the list of firewalls, add them to the list.
- Restart Microsoft Windows 10 update.
Method 2: For an erroneous character in the proxy override settings.
- Open Internet Explorer, if you are using another program to access the Internet, you will still need to use Internet Explorer for this solution.
- Open the Internet Explorer Tools window.
- Click on Internet options.
- Select the connections tab.
- Select LAN settings.
- Select the "Advanced" option.
- Remove anything that appears in the exceptions section.
- Closing Internet Explorer.
- Click on the start button.
- Select RUN and enter CMD in the field, press ENTER.
- A command prompt screen will open. Type "proxycfg -d" and press ENTER.
- Type the command “net stop wuauserv” and press Enter.
- Finally, type “net start wuauserv” and press Enter.
- You have now cleared your proxy cache. Microsoft Windows 10 update is available to download again.
Method 3: If the VPN connection is causing error code 8024402C.
- Disconnect from your VPN connection, thus connecting directly to the Internet without a proxy or network.
- Try updating Microsoft Windows 10 again.
- After the update is successful, connect to the VPN.
Method 4: Use this ISA firewall on your online business site.
- Access the ISA firewall client option. From here, your goal is to run the ISA firewall's auto-discovery feature.
- In Control Panel, select the Firewall Client option.
- Select a configuration option.
- Check the "automatically detect firewall server" checkbox.
- Select the "update now" button.
- Click OK.
- Restart Microsoft Windows 10 update.
Again, not all of these methods are intended for computer users, who typically do not study or change the settings of this kind of software. If you don't like any of these methods, you can download and install a powerful automated tool to repair Windows error code 8024402C.
Problems with Windows 10 Update and their solutions
It is impossible to come up with a single operating system that could satisfy the needs of all users at the same time. Although Windows 10 was declared as the best OS at the moment, it still cannot be called ideal. To keep the system up to date, it is necessary to install updates, but even during this process, problems often arise in the “ten”.
Where is Update Center located in Windows 10
In Windows 10, developers decided to experiment a little by adding an “additional control panel” called Settings. With this they killed two birds with one stone.
Firstly, the classic “Control Panel” has been relieved of some elements, including the “Update Center”.
Secondly, the basic computer settings that users most often change were collected in one place.
You can open Update Center in Windows 10 by following the path: “Windows Settings” - “Update and Security” - “Windows Update”.
Find "Update" in the "Update & Security" section of "Windows Settings"
There are several ways to open Windows Settings:
- key combination Win + I;
- through the “Start” menu - “Settings”. Through the “Start” menu you can go to “Settings”
Oddly enough, the process that is responsible for the security of the operating system often fails. When updating the OS and its components, you may encounter various errors, freezes when trying to update, and the disappearance of the “Update Center” from the settings panel.
Why does Update Center freeze or work with errors?
There are many reasons for problems with Update Center, but the main ones can be counted on one hand:
- viruses. Everyone knows what viruses are. These are program codes that damage the computer's system files and cause services to fail. At the first problem with Windows Update, you need to check your computer for viruses with two or three anti-virus programs. Viruses often start their work from this service; If problems arise with the Update Center, first check your PC for viruses
- disk errors. Disk errors are damaged sectors of the hard drive. Data that is completely or partially located in this area often cannot be read, which leads to dire consequences. If update files or Update Center service files are located on damaged sectors, the entire service will not be able to work correctly; You can check the disk for bad sectors using the Auslogics Disk Defrag program
- errors when updating the system. Update errors occur when attempts to update the device are unsuccessful. Perhaps the computer rebooted during installation (many impatient users are guilty of this) or another reason prevented the correct installation. This leads to errors both in the operation of the Update Center and in the system as a whole;
- disruption of the update service by the user or third-party software and other reasons. Despite all attempts by developers to block access to the Update Center, users do not give up and find loopholes to disable this important service. Regardless of whether the settings are changed manually or using malicious software, the result is always the same. The correct operation of the entire system is at least at risk.
All of the above can lead to fatal problems not only with the operating system, but also with the computer’s hardware.
Windows 10 Update Troubleshooter
The developers made sure that simple Update Center problems could be solved using standard methods. For example, a person who uses the update service eventually came to his senses and decided to turn it back on, but forgot how to do it. The Windows Update Troubleshooter service can help with this situation and similar problems.
This service is located in the “Troubleshooting” section in the “Control Panel”:
- Right-click the Windows icon in the lower left corner of the screen and select Control Panel.
Using the Windows context menu, open Control Panel - Change the view to large or small icons.
Go to Troubleshooting. Go to "Troubleshoot" - Click on the link of the same name in the “System and Security” item to launch the error correction wizard.
The "Windows Update Troubleshooting" link launches a troubleshooting wizard - Click the "Next" button in the wizard window.
All subsequent work will be done by the program itself. Errors that the master can handle will be corrected by him himself. Click “Next” to launch the wizard - Review the completion report.
Upon completion of his work, the troubleshooter will provide a report
All about local networks and network equipment
Both experienced PC users and novice users who are just learning the mysterious and enigmatic world of Windows OS can encounter Windows Update errors.
And it always arises suddenly and unexpectedly. So, let's try to figure out why this problem occurs and how to fix it yourself without harm to the operating system.
How To Fix The Stop 0x8024402c Error
Step 1 – Initialise The “Automatically Detect Connection Settings” In Internet Explorer
Sometimes it can be the case that Windows confuses itself over the way it connects to the Internet. To make sure that your connection to the internet is working soundly, you will have to enable the Automatically Detect Connection Settings in Internet Explorer. To do this:
- Open Internet Explorer
- On the Tools menu, click Internet Options (On newer versions of IE you may have to click ALT to reveal the toolbar at the top)
- On the Connections tab click LAN Settings
- Click to select the “Automatically Detect Settings” and click OK
- Attempt to install updates again
