How to replace the battery in iPhone 5s yourself (step-by-step guide with photos)

Necessary tools to replace iPhone 5/S battery

Replacing the battery on iPhone 5 is not a very complicated procedure. If this is your first time doing this, you will need special tools to disassemble Apple equipment. Professionals can cope with universal tools.

To replace the battery you must have:

  • Pentalobe and Phillips (1.2 mm, 1.3 mm, 1.6 mm and 1.7 mm) screwdrivers.
  • Sucker.
  • Plastic tool.
  • Scissors.
  • Tweezers.
  • New battery for iPhone 5.

iPhone doesn't show battery charge correctly

If something went wrong

Replacing the battery should be done only if the owner has sufficient skills and understands what he is doing. Otherwise, it is more profitable to contact the service and have them do the work. This will cost more (if the warranty has already expired), but will guarantee the functionality of the gadget in the future.

Therefore, it is recommended to start the procedure if there are clear signs that the battery has failed. In this case, you need to pay attention to the following:

  1. The maximum charge does not exceed 80% of the nominal value.
  2. The gadget began to work significantly slower. The manufacturer has foreseen a situation where problems arise due to insufficient charging. In this case, the smartphone begins to work slower, extending the operating time of the device.

If at least one of these two signs occurs, it’s time to replace the battery. It is believed that the battery should remain serviceable for 500 charge and discharge cycles. The condition of this unit deteriorates faster if the gadget is used at a temperature of 35 degrees or higher.

The video shows battery replacement in detail:

Check the battery status as follows:

  1. Open “Settings”.
  2. Included in the "Battery" section.
  3. After clicking on the “Battery Status” line, a list of characteristics opens.

Here you can accurately find out the main parameters of the power source.

Another sign of the need for replacement is swelling of the element. This occurs when the battery has exhausted its life.

You must be very careful when replacing the battery. The slightest mistake can result in loss of iPhone functionality. In some cases it may be complete. If problems occur after assembly, the following must be taken into account:

Vyacheslav

For several years he worked in mobile phone stores of two large operators. I understand tariffs well and see all the pitfalls. I love gadgets, especially Android ones.

Ask a Question

Question to the expert

The Home button stopped working.

You need to check how well the connecting cable is attached between this unit and the housings. To do this, I disassemble and reconnect the cable connectors.

The screen moves slightly when pressed.

The battery is loose. It needs to be disassembled and monitored. So that it is installed carefully.

Spontaneous shutdown occurs and reboots occur at random times.

The most likely reason is that the screws that secure the jumper covering the attachment of the cables to the case are mixed up. In this case, one or more of them damaged the electronic board. Needs to be disassembled and reassembled. In some cases, this can fix the problem. Otherwise, you will have to contact the service.

Carrying out repairs yourself while the warranty is valid will void the warranty. Before carrying out the procedure, you must check whether the warranty period has expired. At the same time, it will not be possible to keep the opening of the case secret from the service.

There is a special sensor inside the gadget that records this fact. When contacting the service, his readings will be checked. Therefore, if there is a warranty, it is preferable to contact a service center. Carrying out repairs yourself in this case is a last resort.

Do-it-yourself replacement will be useful if there are clear signs that the battery has stopped functioning normally. A properly performed procedure will allow you to comfortably use your iPhone for a long time.

The battery ages faster than a smartphone. It is believed that battery replacement is usually required after 18 months of use. Performing this operation independently requires appropriate skills and careful adherence to the required sequence of actions.

4.6/5 — (30 votes)

When should you change the battery?

Everyone knows about the natural wear and tear of battery capacity. If a new original battery can last 2-3 years without replacement and significant loss of charge capacity, then non-original ones can be safely changed once a year.

There are certain nuances when it is necessary to replace the battery:

  • If the iPhone 5/5S turns off when the charge level is more than 20 – 30%, and when turned on, a screen is displayed that signals the battery is low.
  • If the smartphone suddenly begins to discharge by 2 – 3% or more.
  • If the display begins to move away from the case a little or cracks appear on the device.

The last sign may indicate other malfunctions, but if you did not drop the phone, then the case may be bursting with a swollen battery. During operation, the battery emits gas, which accumulates under the shell and slowly inflates it.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]