Any modern smartphone allows you not only to make calls, but also to send SMS messages anywhere in the world. When connected to the Internet, users were able to communicate in instant messengers and post publications on social networks. Since many owners are reluctant to part with gadgets even during a flight, developers have added the “Airplane Mode” option, also known as “Airplane Mode,” to the functionality of Android devices. It will be useful for novice users, especially older ones, to know what tasks this mode solves, how it turns on and off, and what functions it deactivates.
What is Airplane Mode?
Airplane mode is a setting available on almost all smartphones, laptops and similar devices. When you activate Airplane mode, it stops the signal from your device. You'll see an airplane icon in your phone's status bar when it's turned on.
This feature is known as airplane mode because many airlines prohibit wireless devices on their planes, especially during takeoff and landing. There is some debate about whether phones can interfere with radio equipment on airplanes, but most think it's better to err on the side of caution.
Alternative uses
Even though airplane mode was created for airplane passengers, there are many other uses for it:
- Disabling calls. Do you have an important meeting coming up or are you going to attend a conference, but are you afraid of receiving a large number of calls? Simply activate airplane mode and cellular communications and wireless modules will be disabled. Previously, to do this, you had to completely turn off the gadget or remove the SIM card from the tray, which caused inconvenience.
- Save battery power. Cellular communications, Wi-Fi, Bluetooth, GPS - all these functions quickly drain battery power. And when the gadget is about to run out, activating airplane mode will help extend its battery life.
- Fast charging. When you need to quickly charge your phone, simply activate airplane mode and the battery will charge up in just a few minutes. If you systematically use this method, your phone battery may be damaged. Therefore, only turn on airplane mode for charging when your time is limited.
- Fixing problems with the Internet. From time to time, problems arise with the Internet on your smartphone or tablet. For example, the phone stops recognizing Wi-Fi or does not connect to mobile networks. In this case, you can try to restart the device, but this will take time. It is much easier to turn on airplane mode for a few seconds, and the problems will disappear.
There are other uses for airplane mode. For example, if the SIM card is not detected by the smartphone, then just turn airplane mode on and off.
As it turns out, this is a very useful feature. It makes it possible to quickly charge the phone if the user is late somewhere. Plus, using airplane mode, you can turn off calls and messages if you're at an event or conference. If you decide to use this setting to quickly charge your smartphone, please note that this is often not recommended.
What does airplane mode do?
Airplane mode turns off all wireless features on your phone or laptop, including:
- Cellular: You cannot make calls, send text messages, or use mobile data to access the Internet.
- Wi-Fi: Your device will disconnect from any existing Wi-Fi connections and will not connect to any new ones.
- Bluetooth: Bluetooth is a short-range connection that allows you to connect your phone to speakers, headphones, etc. Airplane mode disables it.
GPS is a little different. It doesn't transmit radio waves, so depending on your phone, Airplane mode may or may not disable GPS. While offline mapping apps work without an Internet connection, features like live traffic won't work in Airplane mode.
Is it dangerous to stop Android background processes?
The system has “foolproofing” and you most likely won’t be able to stop something that could actually lead to a critical error, but you shouldn’t tempt fate.
To stop the process, you will need to open the selected application and click “Stop”. It's simple.
If you are in doubt or simply do not want to stop the processes from this menu, you can go elsewhere. Open “Settings”, then “Applications”, then open the list of applications and click the three dots icon in the upper right corner. There, select “Show system processes”.
To force stop or delete an application manually through the application list, go to “Settings”, then “Applications”, then “Application Manager” and select the application you want to change. Don't delete apps that appear when you select the Show system apps option.
Study the list, figure out what you don't need, and stop the process. You need to understand that some applications will immediately restart the process and this can be done indefinitely. To do this, go back and simply stop the application. And if you don't use it at all, just remove it - it will be even better.
How to Switch Airplane Mode on Android
To enable airplane mode on your Android device, follow these steps.
- Swipe down from the top of the screen twice to open the Quick Settings . Alternatively, you can swipe down once with two fingers.
- mode switch in the grid. If you don't see it, you may have to swipe sideways to access other icons.
- Click on it and your phone will go into airplane mode.
Repeat these steps to turn off Airplane mode. Please note that after exiting Airplane mode, it may take some time for your phone to reconnect to Wi-Fi and cellular data. If your phone doesn't have this shortcut for some reason, you can toggle Airplane mode in Settings > Network & Internet > Airplane mode.
Shutdown menu
The third way to disable fly mode is to use a special shutdown menu. This is also a fairly simple, fast and effective method that will allow you to disable this (flight) mode in just a few seconds.
All you need to do is hold down the power button for a few seconds. A small menu with several items should appear on the screen, one of which is responsible for turning airplane mode on and off. All you need to do is click on the appropriate item.
Important: on some phone models, especially on Chinese devices, such as Meizu, this menu may not be present, and all that appears on the screen when you hold down the power button is two items: power on and reboot. So this is also worth taking into account.
How to Switch Airplane Mode on Windows and Mac
In Windows 10, you can toggle Airplane mode through the Action Center. Press Win + A or click the tooltip icon in the bottom right corner of the screen to open it, then find the mode at the bottom.
As it turns out, macOS doesn't have a dedicated Airplane mode option. We looked at how to put a MacBook into airplane mode. put the MacBook into airplane mode though.
Why is the function needed?
It’s not difficult to explain what airplane mode is on a smartphone - even a beginner will understand what the function is. This is an autonomous operation of the device, disabling the options that receive and transmit the signal:
- Cellular;
- Wi-Fi;
- Bluetooth;
- GPS.
At the same time, other features are available - you can listen to music, read books, look at photos. Let's note what else airplane mode can be used for:
- Saving battery life. If you are away from cell towers, the device will constantly pick up and lose a signal - this will drain the phone;
- Speed up smartphone charging. You can speed up the process by 10-20%, since the device will not waste power on determining the location or searching for tower signals;
- An opportunity to hide from communication. Don’t want to be distracted, don’t want to text or talk? Just enter airplane mode!
In a couple of seconds you will disappear “from the radar” - you don’t need to perform complex actions to close applications. However, most of the options will remain available!
We figured out why airplane mode is needed on a phone - let's talk about activating and deactivating airplane mode.
Does airplane mode save battery?
Yes, airplane mode definitely helps your device save battery power. The various radios on your phone consume a lot of power. They regularly send app notifications over Wi-Fi, communicate with Bluetooth devices and cell towers, and check your location.
All of these use a lot of power, so turning them all off at once is a great way to extend the life of your phone. Since your phone doesn't do as much work in airplane mode, it should also charge faster.
What causes your phone battery to drain?
Now let’s look at what exactly drains your phone’s battery. The analysis methods given above are undoubtedly good, but they also have disadvantages. They do not show the direct impact of the application on the battery. To understand how many percent the processes of each specific application spent, you need to open “Settings”, then “Battery”. Here you can find information about which applications are running and how actively they drain the battery. This will make it even easier to decide what to stop or even delete.
With each new version of Android, the number of automatic charge saving systems increases. This means that over time the number of settings may be reduced.
Third-party applications for optimizing smartphone performance have always caused a lot of controversy and discussion. On the one hand, they allow you not to think about how and what needs to be done to stop unnecessary processes, but such applications may also have disadvantages.
The main disadvantage is that such applications themselves can drain the battery even more. Many users complain about this. Sometimes it’s really easier to do everything manually than to trust everything to automation.
Can you use Wi-Fi in airplane mode?
It depends on your device, but most modern phones allow you to use Wi-Fi even in airplane mode. When you turn on Airplane mode, Wi-Fi is turned off, but you can turn it back on manually.
On an Android device, swipe down from the top of the screen twice to open Quick Settings , then tap Wi-Fi . Give it a few seconds and you should see Wi-Fi turn on and connect (if your phone allows it). On iPhone, open Control Center and tap the Wi-Fi in the same way.
Many airlines now offer , so you may want to enable this feature to enjoy it if applicable. If you are unsure, ask an airline employee before attempting to connect. However, airplanes only support Wi-Fi above 10,000 feet, so be careful to keep Wi-Fi turned off during takeoff and landing.
How to control background processes on your phone?
The best way to gain control over your processes is to dig into your phone using the monitoring tools built into Android. Which menus you need to go to and where to click depends on who made your smartphone. But in general the logic will be the same.
In some cases, you'll need to enable Developer Options before you can start customizing settings. To do this, open “Settings”, then “About phone”, and then click on the “Build number” field several times (about seven times). You'll receive a notification that Developer Options have been unlocked once you're done.
First of all, go to “Settings”, then “System”, then “Advanced” and “Developer options”. In this menu you need to find the item “Running services”. Inside you will see which applications are consuming RAM and you can install them. But it's important to understand that if you don't know what you're stopping, you can only make things worse. Stop only what you started.
If you don't know what you can stop and what you can't, you do so at your own risk. The main thing is not to touch applications whose name contains “Google Services” or simply “Google” - with rare exceptions these will be system services.
Does Bluetooth work in airplane mode?
This is a similar scenario to the one above. Enabling Airplane mode turns off Bluetooth, but on most phones and laptops you can turn it back on using a keyboard shortcut. Airlines don't care much about Bluetooth because its range is so short.
Turning on Bluetooth allows you to connect Bluetooth headphones, keyboards, or similar devices. Even if you're not on a plane, you can do this to save battery by listening to music offline through Bluetooth headphones.
Through settings
You never know what the manufacturer has done with your phone, but it may happen that the desired item is not in the curtain. Then you can disable this mode through the usual settings.
- Go to “Settings”. Find the wireless networks section and click on the “More” link (sometimes “Additional functions”):
- Uncheck airplane mode:
How to listen to music in airplane mode
Since you don't have an internet connection while in airplane mode, music streaming apps like Spotify, Google Play Music, and others won't work. This means you have two options for listening to music in airplane mode.
First, if you subscribe to the paid versions of these services, such as Spotify Premium or YouTube Music Premium, you can download music to your mobile device. This allows you to listen to it even in airplane mode.
If you don't want to pay for a premium streaming subscription, you can still listen to the local music you own. You will need to sync your music to your phone. to do this.
How to disable offline search on a Samsung phone?
How to disable offline search on Samsung?
- Open the Find My Mobile application.
- Go to the “Search offline” section. ...
- Near the item of the same name, move the slider to the left.
8 Feb.
2022 Interesting materials:
When to prune hydrangeas after flowering for the winter? When to trim branches on an apple tree? When did World War 1 end? When to cut fruit trees in the fall? When is personal income tax paid on vacation pay? When to pay contributions to the Social Insurance Fund? When to spray the garden with iron sulfate in the fall? When to harvest Chinese cabbage in the fall? When are the autumn holidays in Ukrainian schools? When did the Ossetians come to the Caucasus?
Flying high in airplane mode
We've answered some of the most common questions about Airplane Mode on your phone or laptop. In short, it lets you turn off all wireless activity on your device, which is required on some flights and is handy even on the ground.
If you have a long flight, we recommend downloading media files onto your phone so you don't have to rely on an Internet connection. And if you're interested in some of the science on this topic, check out how airplane mode affects your sleep.
Via the power button
Personally, for some reason I prefer to use this method. And it came out to me somehow automatically. Yes, it’s much more convenient to remove it through the curtain, but you can’t break the habit. So:
- Press and hold the phone's on/off button for a LONG time (do not accidentally turn off the phone, 1 second is enough).
- The following menu appears:
And then you already understood how to disable airplane mode here - just tap on the item.
How to limit background work
Limiting the background operation of applications or services reduces the functionality and multitasking of a mobile device. At the same time, deactivating unused utilities will increase autonomy.
Instructions:
Open the system settings section.
Select "Data transfer".
Next is the “Traffic Saving” item.
Activate the function by changing the switch.
Set exceptions here. These applications will receive unlimited access to the Internet.
To enable it, just flip the switch.
Some programs need to be opened first, and then the “Background Mode” must be turned off.
Unclosed Android applications continue to run in the background?
This is partly true, but “work” is not quite the right word. First you need to understand the theory. Almost all Android applications consist of two main parts:
- User visible part.
- The part that the user does not see.
The first is the part that a person interacts with after clicking on the application shortcut. At this time, the RAM contains the graphic resources of this application and all kinds of temporary files. The Application Controller gives you the ability to switch between recently opened programs, returning to the same place where you left off.
You can switch between programs without losing data as long as your mobile device has enough RAM. As soon as the RAM with which applications can work runs out, the operating system begins to unload from memory those applications that have not been used for a long time, thus freeing up space in it for used programs.
Manually closing the application and automatically unloading are practically the same thing. During such operations, the part of the application visible to the user is unloaded from RAM. Unsaved progress will be lost, and when the program is launched again, the user will see its main screen.
Applications from the multitasking menu cannot be called fully functional. In fact, they are just cached data that does not affect the performance of the mobile device in any way and remains in RAM only so that the user can quickly return to the place where he left off.
Disable data transfer for one application
In fact, you cannot disable a background system process, but you can transfer it to the “Suspended” process. This is done through the application manager in the Android device settings. Also, to prevent an application in the background from accessing the server, thereby saving battery power and mobile traffic, you must:
- go to “Settings” → “Applications and notifications” → “Applications”;
- select an application and open its settings;
- go to “Traffic Statistics”;
- disable “Background” processes – to prohibit exchange in the background;
- disable “Data transfer”, “Wi-Fi” and “Roaming” to prohibit data exchange via mobile data and Wi-Fi.
After this, the application will not be able to exchange information with the server. Regarding system applications, for example “SMS” or “Phone”, you cannot disable them. You need the good old Root of your smartphone.
