Setting up the Asus RT-N11p router: step-by-step instructions

Author of the article

Vladimir Novoselov aka Rescator

Technical support specialist, PHP programmer, WordPress developer

Aimed at the budget user, the Asus Rt-N11p model appeared on the shelves in 2015. Traditionally for the brand, it has a noble black color and a minimum of outwardly eye-catching details. Nobody expects advanced functionality from an inexpensive router, but the user has the opportunity to set up IPTV or create a secure connection via VPN.

Connection

Connecting the Asus Rt-N11p router and setting it up yourself begins by installing the device on a flat surface or mounting it on a wall. The set includes paws and ears, but the latter are made non-standard. Since the antennas have minimal ability to rotate, the developer turned the ears. Thanks to this, the router can hang its antennas on the right or left sides.

The dimensions of the device are impressive - 146 by 111 mm. Height (excluding antennas) - 24 mm.

We connect the provider cable to the port near the electricity input, from the computer to any of the other 4. The power supply is turned on at 220 V, then the button located next to the wire connection is pressed.

You can configure the Asus R-N11p router, like other models from ASUS, via Wi-Fi, but the developers strongly recommend using a wired connection for this.

Possible malfunctions and ways to eliminate them

Review of the RT-AC51U router from ASUS

Products from Asus are highly reliable. Therefore, once you set up your N11P, you can forget about its existence for years. If, however, problems occur with network access, you must do the following:

  1. Update the router firmware to the latest version.
  2. Restart the network. To do this, you need to sequentially turn off the router, modem (if used), as well as all computers on the network. Then turn on the router and wait at least two minutes. After that, turn on the computers on the network.
  3. Check that the cable from the provider is correctly connected to the router in the WAN port and connected via the LAN ports.
  4. Check the wireless network settings on your computer. They should match the Wi-Fi settings on the N11P.

If the described actions do not lead to the desired result, you should contact Asus support on their official website, describing the problem. And if you suspect a physical malfunction of the router, take it to a service center.

Entering the settings interface

Since the interface, once developed, was successful, according to the company, the settings for the Asus Rt-N11p router remained in their usual places. If the user has previously encountered the web interface of brand devices, then he should not have any problems with this device.

The well-known 192.168.1.1 is entered into the browser. The default login and password for Asus Rt-N11p is admin. In response to invitations, it is entered into both fields and taken to the interface.

Quick setup

Since the interface is familiar, and the router itself differs from popular models only in the absence of USB ports, the appearance of a quick setup wizard when you turn it on for the first time is also expected.

Algorithm:

  1. In the window, as in the screenshot, click the “Go” button. Next, the router will try to configure everything itself.
  2. If the connection is successful, you will need to specify the name of the wi-fi network and its password. Next, click the “Apply” button.
  3. The network is configured; to complete, click the “Done” button.

Next, let's move on to the full settings.

Manual configuration using the example of popular providers

With the Asus Rt-N11p router, setting up an Internet connection is possible using all popular protocols - IpoE (static or dynamic), PPPoE, L2TP and PPTP.

Since everything is clear with the first one, in one case you only need to set the connection type, in the other you need to enter all the data from the contract.

Let's move on to users of Rostelecom and all providers using the PPPoE protocol.

Algorithm:

  • Connection type: "PPPoE";
  • Enable WAN, enable NAT - “Yes” in both cases (the first allows a connection with the provider, the second manages connections from the home network);
  • Enable UpnP - optional. Usually everything works without it too;

  • Obtain a WAN IP address automatically. Connect to the DNS server automatically – “Yes” (without this you will not get further into the network from the provider);
  • To set up an account - Pppoe connections Rostelecom and Dom ru provide a login and password. They are taken in the contract.

Beeline connects its users using two options - L2TP and PPTP

If Beeline has a connection type of l2tp, the connection type is set to L2TP, the first 5 checkboxes are set to “Yes”.

Beeline specifies the username and password in the contract, they are taken from there.

Additionally, the “VPN server” is indicated - tp.internet.beeline.ru.

If Beeline offers a PPTP connection option, then the settings will be similar, only you will need to select a different connection type and server. The latter’s address is vpn.internet.beeline.ru.

Wi-Fi setup

If Internet access is configured by the provider, then the wireless network is installed by the user. To do this, go to the section of the same name in the additional settings block. In order for the user’s devices to connect to the router and access the Internet, the settings on the first page are sufficient.

Here you need to select the network name - SSDD and protection. The rest of the settings can be left untouched.

A few clarifications:

  1. The ASUS name in the SSID field is set at the factory. It is recommended to install something more user-friendly.
  2. The wireless network mode at home should be auto - the router itself is able to select the best settings. It is recommended to check this box only if ancient devices will be working on the network; the router will provide additional protection for them. If all devices are modern, it is not needed.
  3. The authentication method is the maximum one that is in the list. Install as in the picture above.
  4. WPA user key - enter the password here, which you will need to enter the first time you connect to the router’s network. The general recommendation is to make it at least 8 characters long and use letters and numbers.
  5. There is no need to touch the field below. It is only important if the field above is left blank.

On the "Advanced" page you can set a work schedule. Separate parameters for weekdays and weekends are supported.

Repeater mode

In addition to the standard options: the router and access point Rt-N11p can also work as an amplifier for another network. The operating mode will switch to the “Administration” or “Internet Settings” menu if the “Quick Setup” block is selected.

Open the page and, setting the switch to the desired position, save. The router will reboot and search for all available networks, displaying a list of them. Select a network. If we know the password, enter it (the window will appear after selection) and connect.

On one access point you can raise up to 3 networks - two additional ones to the local one. But then you need to save them in the “Guest Network” section and in operating mode as a router. Connecting to additional networks has one limitation - only one of the three can be connected to the Internet.

It should be taken into account that in repeater mode the router will receive an address from the main network and it will not be possible to log into the web interface using the old IP.

If you need to log in, you can solve it in three ways:

  1. Go to the main network client settings and look at the assigned address there;
  2. Login through an alternative address - router.asus.com.
  3. Download the proprietary ASUS Device Discovery utility from the company’s website.

After scanning the network, it will find all brand devices and show their addresses.

Authorization

In order to get to the router’s web interface, you need to open your Internet browser and type 192. 168.1.1 in the address bar, Username - admin , Password - admin (provided that the router has factory settings and its IP is not changed).

Firmware update

A separate category of users will be interested in support for working with alternative firmware. For stable operation of the device, it is recommended to update once every six months.

Firmware update algorithm:

  1. In the “Administration” section, select the “Firmware Update” page.
  2. Download the firmware from the manufacturer's official website https://www.asus.com/ru/Networking/RTN11P/HelpDesk_Download/.
  3. Next, select the downloaded firmware and click the “Firmware Update” button.

Important! It is forbidden to turn off the power to the router while updating the firmware. This will damage the device.

User reviews

Like any device, the RT N11p has advantages and disadvantages. In their reviews, users primarily cite stability of operation and a good signal as advantages. This router also has a fairly large coverage area and is not very expensive compared to options with similar functionality.

The device also has disadvantages. Users complain about the case being soiled. Among the shortcomings, we should highlight the unsuccessful factory firmware. Therefore, it is better to reflash the router immediately after purchase.

Security Settings

Since the router is budget, an extended set of security settings is not provided. In addition to filtering wireless network traffic, you can configure blocks by URL, keywords, and time of use. The latter is set according to the same principle as in the Wi-Fi settings.

You can set bans separately for each day of the week, accurate to the hour. Work on black (everything not specified is allowed) and white (everything else is prohibited) lists is supported.

Brief description of the model

The Asus company is jealous of its reputation as a manufacturer of reliable equipment, and the Asus RT-N11P version is no exception. Even at a very low price, it provides a high degree of stability of reception and transmission both over a cable connection and over Wi-Fi.


The procedure for entering parameters in the router interface is very accessible and simple, so if you have the appropriate instructions, anyone, even a novice user, can enter them on their own, without resorting to the paid services of specialists. Moreover, the target audience this device is aimed at purchases it for use primarily at home, where reliable operation of the device with minimal or almost no constant maintenance is important.

Factory reset

The logical conclusion of the topic would be a page where you can save the configuration, restore a previously saved one, or reset the Asus Rt-N11p to factory settings.

The page is located in the “Administration” section of the additional parameters block. It's called "Manage Settings". Each function has its own column in the table presented on the page. Reset in the "Factory settings" line. After pressing the button, the router will ask for confirmation and reboot. The router will reset all settings. When you log in again, all settings will return to their default values.

Characteristics

The Asus wireless router is a single-band router and operates only at a frequency of 2.4 GHz. It has two non-removable antennas. The router provides signal coverage within a radius of up to three hundred meters with a total maximum speed of 300 Mbit/s.

In addition to Wi-Fi signal transmission, the device has four ports for connecting devices to a local network via cable. In this case, the speed will be up to 100 Mbit/s. The fifth port is designed to connect to a global network access service provider. The ports are on the back of the device as are the keys. There is nothing on the sides except cooling grilles.

The indication is located on the top of the cover. Four indicators indicate the status of Wi-Fi, WAN, LAN and power. To avoid confusion, there are symbols underneath them.

Nearby is the power socket and the power button. The router's configuration is minimal. It includes the device itself, patch cord, adapter, warranty card and instruction manual.

The Asus RT N11p router has a power button and a WPS key to automatically configure the router to connect the user's device.

From the point of view of the firmware features, it is worth noting that:

  • the device supports VPN in all operating modes;
  • You can configure several networks in the router using only one access point;
  • All current security protocols have been installed, including WPA2-enterprise (previously this key was used only for professional equipment);
  • there are parental controls;
  • it is possible to open ports (this is necessary for the correct operation of certain programs);
  • there are static and dynamic routing;
  • this model supports IPTV;
  • The RT N11p router supports a DHCP server for client machines.

The great advantage of the device is the ability to use alternative firmware. It is possible to quickly return to firmware versions from the manufacturer.

Accessories

The device is equipped with everything necessary for quick commissioning, so additional purchase of equipment is usually not required.

The kit list includes the following items:

  1. The Wi-Fi device itself with two external antennas;
  2. 220 volt power adapter;
  3. Patch cord;
  4. User guide;
  5. Warranty card.


Despite its good functionality, it has compact overall dimensions (145 x 110 x 25 mm) and low weight, which is only 0.18 kg. This advantage allows you to install the device in any place convenient for the owner; even double-sided tape holds it in place perfectly if the device is mounted on the wall.

Equipment

There are four light indicators on the device body to display operating modes.


The manufacturer has implemented an excellent ventilation system for the device, equipping it with a large amount specifically for cooling the slots provided at the bottom of the module. There are also 4 special legs on the body for free air circulation under the device, which prevents it from overheating. The feet are made of special rubber that prevents slipping on the surface on which the router is installed.


The main panel on the back of the device includes 5 ports for connecting cables. Next to them is the “On/Off” button, a socket for supplying power from the mains and a combined “Reset” button with “WPS”. Two non-removable external antennas are responsible for a good level of wireless signal.

Connecting the ASUS RT-N11P router to the Internet and computer via cable

In order to connect the Asus RT-N11P router to your computer, you must first remove the Internet cable from the network connector on the back of the PC. On a laptop it can be located on the side.

And insert it into the WAN port on the Asus router. Usually it is highlighted in a different blue color from the rest.

Next, we take the wire from the set that was in the box with the Asus router and insert it into any of the few remaining LAN connectors on the router, which are marked with numbers.

We insert the other end into the same Ethernet network connector on the PC from which we just removed the Internet cable.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]