12 Methods to Fix iPhone Flashlight Not Working

An iPhone flashlight is of great importance when we take photos or use it to illuminate the road at night. However, sometimes you just find that the iPhone's flashlight isn't working, or it's grayed out in Control Center without responding. This problem often occurs when you update your iPhone to a new version of iOS, reset your iPhone, or cause water damage.

In reality, we cannot always introduce these problems into a hardware problem. In most cases, we can solve these problems with simple approaches. With that in mind, this article showcases the 12 best ways to fix iPhone flashlight not working. Just keep reading to find solutions now.

• Part 1: Basic 5 Methods to Fix iPhone Flashlight Not Working
• Part 2: 7 Solutions to Fix iPhone LED Flash Not Working

Flash doesn't work

To test whether the LED flash is working, try turning on the flashlight in Control Center by following these steps:

1. On an iPad or iPhone X or later: Swipe down from the top right corner of the Home screen. On iPhone 8 or earlier: Swipe up from the bottom edge of any screen.
2. Click the Flashlight button in the lower left corner of Control Center.

If the LED flash doesn't work as a flashlight, contact Apple Support.

Part 1: Basic 5 Methods to Fix iPhone Flashlight Not Working

In fact, solving iPhone flashlight problems may not be as difficult as you imagine. Some simple operational processes can help at this stage. Here are the specific methods for your reference.

Method 1: Turn off the camera app

Step 1. Quickly press the Home button twice and swipe up to close the Camera app.

Step 2. Launch the Camera app again to determine if the iPhone's flashlight is working. You can disable all associated applications to ensure that it is not a software issue.

Method 2: Hard Restart iPhone

Step 1: Press and hold the Sleep/Wake button until the Apple logo appears.

Step 2. For iPhone 7 users, you have different buttons. Please press the Home button and Volume Down button. And for iPhone 8/X users: press and quickly release the Volume Up button, then press and quickly release the Volume Down button, finally press and hold the Power button.

This method seems to be a simple but really effective way to solve iPhone problems including iPhone flashlight not working.

Method 3: Restore iPhone from iCloud

Step 1: Go to Settings > General > Reset and then select Erase all content and settings. After erasing iPhone content, you can restore iPhone to the previous version that has flashlight.

Step 2. And then you can restart your iPhone, you can find the "Hello" screen to check if the iPhone flashlight is working now. It will turn your iPhone into a completely new one.

Step 3. Click "Recover from iCloud Backup", you can select the iCloud backup file. And then you can restore iPhone from iCloud backup to fix iPhone flashlight not working problem.

Method 4: Restore iPhone from iTunes

Of course, you can also restore iPhone from iTunes backup to fix iPhone flashlight not working problem. It is recommended to back up your iPhone to iTunes before restoring.

Step 1. Connect your iPhone to the computer with a USB cable, then the computer will launch iTunes automatically.

Step 2: If you need to backup your iPhone first, you can click "Backup Now". You can also click "Restore Backup" to restore iPhone from iTunes backup.

Step 3. After that, you can select the iTunes backup file to get rid of the iPhone flashlight problem.

Method 5: Update to the latest iOS version

Updating the software to the latest version may fix iPhone flashlight problems. Before updating your iPhone, make sure your device is fully charged and connected to Wi-Fi.

Step 1: Go to Settings>General>Software Update, check if an update is available for the operating system.

Step 2: If a software update is available, click the Update Now button to update your iOS version accordingly.

When you fix iPhone flashlight won't work problems, you should transfer some important files that were not backed up. Apeaksoft iPhone Transfer should be the recommended alternative to iTunes to transfer data to iPhone, iPad, iPod and other iOS devices.

1. Easily sync messages, contacts, photos, music, app data and more from iPhone or other iOS devices.

2. Transfer files from iPhone to computer or iPhone to iPhone flexibly. Moreover, you can sync messages directly to your computer.

3. Without iTunes limitation that you will erase data during synchronization, you can use this tool to copy all files, prevent iTunes errors, view files instantly.

Free Download Free Download

Device overheating or undercooling

When shooting movies for an extended period of time with the flash on, or when using the device in a hot environment, a message indicating that the flash is off may appear. The message is displayed until the device cools down.

If the battery level is low or the device is overheated or cold, the camera flash and flashlight may not function. These functions will resume operation after the device is recharged and the temperature is restored to normal.

Possible causes of malfunction

The flash on your iPhone may stop working due to various reasons. You may have updated your iOS operating system or installed unlicensed software. Then the cause of the breakdown is a software failure, and you need to reboot the device. If the flash fires spontaneously and the quality of the photos has deteriorated, most likely the problem is in the settings.

The cause of the malfunction is obvious in the case of mechanical damage to the main camera and moisture ingress. If the flash does not turn on as a result of an impact, a fall, or a liquid spill, there is no need to try to update the software or configure this function. It is important to contact a specialist in time, as moisture inside the iPhone causes corrosion. Destruction of contacts, tracks and microcircuits leads to the fact that the phone will stop working altogether.

Also, the problem with the flash can be caused by overheating of the iPhone.

Installing updates

The lack of backlight during photography may be the result of a software glitch or incorrect iOS update. To install a new firmware version, just follow a few simple steps:

1. Download the firmware of interest from the official website. It must match the iPhone model, otherwise a software and hardware conflict may occur.
2. We connect the device using a cord to the PC, launch iTunes.
3. Click on “Restore” in the program, plus the Shift key.
4. After opening the dialog box, select the file with the firmware.
5. We start the process, which lasts on average 20-30 minutes.
6. After installation, a line will appear with a choice of setting up the iPhone - as new or from a backup. You need to click on the first option.

There is an easier way to update the system, accessible even to inexperienced users:

1. We put the phone on charge: during the update process, energy is consumed quite quickly.
2. We connect to Wi-Fi, in the parameters click on “Software Update”.
3. Select “Download” and wait for the system to install.
4. We reboot the device for the changes to take effect.

Replacing the Camera Module and LED

If the above options do not help resolve the situation, it is likely that the problem comes down to a faulty camera module. The flashlight is its component part, so you cannot replace it separately - you will have to completely replace the old camera with a new one. To do this, it is best to use only original spare parts, since non-original ones may not fit or the flashlight will not function correctly.

What to do if the message “You need to cool down your iPhone before using the flash” appears

The camera and flashlight on iPhones are closely related.

Overheating disrupts the operation of individual elements of the device

A malfunction of one element automatically disrupts the operation of another. If the flashlight does not work on your iPhone 5 S or SE, you need to try the following methods:

• alternately switch the front camera and the main one;
• close all applications and use the camera again;
• restart the phone while simultaneously pressing the “Home” button until a white apple lights up on a black background;
• lightly press the location of the camera with your finger (sometimes the contacts come off);
• activate energy-saving mode by going to the iPhone settings and selecting “Battery”;
• Remove the back cover of the device and check the condition of the camera cables and battery.

Note! If your iPhone 5 needs to cool down before use, you can try resetting settings and content. This is a last resort as there is a risk of data loss. If this does not help, then the problem is inside the smartphone. In this case, it is recommended to send your iPhone to a service center for new firmware.

Select your iPhone model

How to fix the problem

Among the presented methods, there are 5 more ways to solve the problem. They will help restore the operation of not only the flashlight, but also the flash.

Method No. 1

Represents disabling low power mode. Actions:

1. Go to settings.
2. Select "Battery".
3. Disable the mode by moving the slider to the left.

Method number 2

Turning off Do Not Disturb allows you to customize how the flash and flashlight work. To do this, you need to go to the settings and select the specified item. After this, the presented elements will be included.

Method number 3

Represents a device lock. To do this, just leave the phone for 1 minute. or click on the “Wake and Sleep” button.

The easiest way to solve the problem

Method number 4

In this case, you will need to check the operation of the device's LED flash. Actions:

1. Go to settings.
2. Select the “General” item.
3. Scroll down.
4. Click on the “Accessibility” item.
5. Select the desired settings by toggling the LED flash.

Important! If the presented methods do not solve the problem, you need to contact the service. Most often, element failure indicates damage to parts. They must be replaced to restore the device's functionality.

How to restore performance on your own

First of all, remove the film, as it may interfere with the normal operation of the lighting. Test how the flash works using the Camera and Flashlight apps. If the flashlight is on, but the flash cannot be turned on, the problem is in the standard Camera program. It needs to be updated or use an analogue.

Next, explore your iPhone settings. Go to “Do not disturb”, activate the “Manual” option and disable it again. Check if the application that controls the flash and enables photo and video shooting is allowed.

Software failures can be easily resolved by rebooting - press the Power button, wait for the slider to appear and move the pointer to the right. Also install updates:

• connect iPhone to charger
• enable internet access
• run the software update in the main settings

If the flash fires but unpredictably, try adjusting it. Click on the lightning icon in the upper left corner of the screen and change the settings.

It was not possible to turn on the flash again - you will have to contact a specialist. If you haven't flooded or dropped your phone, visit an Apple representative and request a free repair. Otherwise, the best way to fix your iPhone flash is to call YouDo artists to your home.

How experts can solve the problem

Use the functionality of the YouDo service if you do not want to waste time traveling. Professionals registered with Yuda come to your home and office with all spare parts and tools. They set minimum prices and accept orders around the clock.

The LED responsible for the bright flash cannot be replaced separately. Experts completely change camera modules in several stages:

• unscrew the bottom screws and lift the screen 90 degrees using a suction cup and spatula
• remove the cover of the FPC connector and the protective plate, disconnect the cables and the display module
• remove the battery cable together with the holder, remove the battery, disconnect the antenna cable
• remove the flash bracket, disconnect the motherboard from the top cable and button wires
• remove the bottom cable connector and SIM tray; remove the motherboard, having first disconnected the Wi-Fi cable
• disconnect the bracket and cable of the main camera
• remove the old part, connect a new camera, assemble the phone in reverse order

Yudu performers provide guarantees of up to 1 year, work efficiently and quickly. Order iPhone repair services on youdo.com, if the flash on your iPhone does not work - professionals will replace the camera within 60 minutes.

How to cool down an iPhone

Instructions on how to remove everything from an iPhone before selling it

According to the manufacturer's instructions, the temperature of the device in operating mode should not exceed 35 °C. Storing a smartphone in rest mode is allowed from −20 °C to 40 °C. If the temperature exceeds the norm:

• the device stops charging;
• Cellular communications are deteriorating;
• the screen dims or turns black;
• The camera, Wi-Fi modules, flash and GPS do not work.

To cool, do not put the device in ice

It is recommended to cool the device as follows:

• control the body temperature. If it is high, it is recommended to put the device aside for a while until it has completely cooled down;
• limit smartphone use;
• disconnect from the charger;
• turn off data transfer;
• put the iPhone in a well-ventilated area;
• hide the phone from direct sunlight;
• in summer, remove the cover and other accessories;
• Do not leave the device indoors.

Apps crash on iPhone

Users often complain that iPhone applications close or crash on their own. Perhaps the developers wrote something wrong in the code, perhaps Apple made an oversight somewhere. In any case, first try closing this program completely through the multitasking panel, wait a minute, and then open it again.

Applications won't open on iPhone? We are flying to your aid.

Did not help? Then let's try to check if an update has arrived for our program. I personally know many users who completely ignore any innovations and have not updated for years, and the number hovering above the App Store icon is well over a hundred.

If this fails, I suggest restarting your iPhone and trying to start the application again. Plus, don’t forget about a simple but always working method: just delete the application or restart your device. I know that gamers are often afraid to delete their favorite shooter due to the loss of progress in the game, so I warn you: it is saved in iCloud. And if the game is played online, then there is no need to worry at all.

Control via lock screen

This method is only suitable for controlling the built-in lighting function, not the software one. After clicking on the “lock” button located on the top or side panel of the device, the lock screen appears. To quickly turn on the flashlight, just click on the camera icon. You can turn off the flashlight in the same way.

The iPhone will have to be repaired if the flashlight does not work, only in a workshop, because if you independently interfere with the functioning of the device, opening the case and replacing parts, you can only aggravate the situation if you do not have the appropriate experience and knowledge. Most likely you will have to replace the camera module, since the LED is tied to it.

The owner himself can only diagnose and repair without disassembling the device, and in most cases the problem can be fixed without visiting a technician.

How to make a notification with a flashlight?

If your device is Android 9

1. Open settings.
2. Select Accessibility.
3. Select Advanced Options.
4. Select
   Flash Notifications
5. Activate the "Flash" item.
6. Ready.

Interesting materials:

What is the name of the music in the background? What is the name of a musical form where two parts are the same? What is the name of a set of earrings and a ring? What is the name of a rider on a horse? What is the name of the lens attachment? What is the name of the national dress of India? What is the name of the earphone? What are the headphones called? What is the name of waterproof fabric? What is the name of non-woven material?

Is it possible to make a flash on an iPhone yourself?

You can check the operation of the camera by replacing it with another one. And if this does not help, then most likely the problem lies in its control circuits. Eliminating it is somewhat more difficult and cannot be done without the help of a professional. Moreover, replacing the camera requires the necessary knowledge. But still, you can perform some actions on your own.

As noted above, the main reasons for the failure of the flash on a smartphone are related to mechanical impact: moisture or shock. But the breakdown may be caused by errors in the firmware or a software glitch. Depending on this, the problem is solved in different ways.

How to turn on the flashlight on iPhone X on the locked screen?

How to activate the flashlight or camera from the lock screen of iPhone X (10)?

1. press the Lock/Power button, which is located on the right side of the smartphone (if the iPhone screen is in sleep mode);
2. on the right and left we see the Flashlight and Camera buttons, press them firmly to use 3D Touch and then they are activated;

22 Mar.
2022 Interesting materials:

Who sets tariffs for the population? Who sets the requirements for the organization and implementation of production control over compliance with industrial safety requirements? Who is the coach at Chelsea? Who's in Nana's group? Who took off his mask in the program yesterday? Who hosted the program Wait for me before Kvasha? Who sees my saved VKontakte photos? Who is to blame for the breakup between Olga and Oblomov and why? Who was included in the elected council? Who was part of the German coalition?