✅ Firmware for Huawei E173 and E173U-1 from Megafon for unlocking:

As you know, due to the widespread use of high-speed mobile Internet, today many people use it not only on mobile devices and handheld gadgets, but also on laptops, even personal computers. In the latter case, Internet access is provided by connecting USB modems to computer equipment. And Megafon offers a whole line of such devices that allow you to access the Internet from anywhere in Russia where there is coverage.

It is worth noting that the modems offered by the Megafon operator are programmed to work exclusively with this operator, and if users need to change the provider and use the device with its SIM card, any attempts will fail. Therefore, the question of how to flash a Megafon modem for all SIM cards is so popular today.

In general, Megafon offers fairly loyal and comfortable conditions for using the Internet, which should not force people to make their choice in favor of other operators. However, such a trend is observed today, and we want to understand how it is possible to perform such an operation.

How to flash a MegaFon E173 modem for all SIM cards - instructions

General characteristics

The described modem is often used by residents of large cities. It so happened that even in the capital with an actively working third-generation network, a weak signal appears. Therefore, quite often there are situations in which 3G works terribly poorly. The E173 modem is an excellent device. It allows you to catch even a weak network signal and ensure its stable operation. The device is in demand, at least because many buyers still pay more attention to characteristics and indicators, rather than to external design.

How to flash a Megafon E173 modem for all SIM cards

We will consider the information using the example of the popular USB modem model E173.

Instructions for configuring the device are as follows:

Install a SIM card from another operator, which you plan to use in the future to gain access to the Internet, into the Megafon modem.
Connect the modem device to your computer (via USB port).
Install the standard modem driver, which is located directly on the device. The installation should start automatically. If this does not happen, go to the modem folder in “My Computer” and run the Autorun.exe file.
After installing the driver, the program interface for connecting to the Internet will launch. You can close it.
Now you need to install the firmware update, which can be downloaded with all the necessary files in the archive here. Unpack the archive and run the file “E173u-1Update_11.126.85.00.209_B427” as an administrator (right-click on the file and select “Run as administrator”).
Accept the terms of the license agreement by checking the checkbox located first in the list of two available options.
Click on the “Next” button, which will become active after placing the marker in the checkbox.
After installing the firmware, run the “Huawei modem unlocker” file located in the unpacked folder.
Make sure that the modem connected to the computer is identified in the “Detected Modem” field. If this does not happen, you need to click on the “Refresh” button.
Next, click on the “Calculate” button.
The next step is to click on the “Unlock” button.
Wait for the unlocking process to complete. You will be notified of this by a message in the Lock Counter line, which should say: “10 – Left of 10 attempts.”
The program can be closed.

Megafon modem and its advantages

Modems from Megafon allow you to use all the advantages of the mobile Internet, including available generations of technologies. The device looks like a simple USB flash drive that is inserted into a computer or laptop. An operator SIM card is also required for operation. Of the main advantages of Megafon, it is necessary to highlight:

The largest coverage area - no operators can compare with Megafon in terms of coverage area. Communication towers are installed even in the most remote corners of Russia, so you can use the Internet literally everywhere!
Internet speed - modern equipment allows us to provide customers with the highest quality services.
Advanced technologies - the operator keeps up with the times and the main innovations in mobile and Internet communications appear immediately. The speed of innovation cannot be compared with other companies.

Before choosing a suitable modem, you need to decide on the purpose of using the Internet and familiarize yourself with the operator’s tariff plans. The difference between 3G and 4G Internet will be colossal, and the situation will be similar with work devices. The faster the data transfer speed and volume of services, the more expensive the device and tariff plan.

For simple surfing the Internet and social networks, a 3G connection will be sufficient. For games, working with video materials, downloading large files, you need to take care of the data transfer speed and quantity, so you should choose 4G Internet. You should take a responsible approach to the question of the purpose of the modem. By price and purpose, modems are divided depending on the generation of mobile communications - 3G and 4G. The devices are also characterized by data transfer speed, the ability to distribute the Internet to other users, support for memory cards and much more.

Megafon 4g modem

The company is currently producing a single 4G+ (LTE) modem called M150-2 . On the official website the equipment costs 2,591 rubles including a SIM card. You can buy a modem at official sales points or an online store. Let's look at the brief characteristics of the M150-2:

Internet generation - 2G, 3G, 4G+;
SIM card generation - standard;
maximum speed - 150 Mbit/s;
equipment weight - 23 grams;
antenna connector - CRC9.

Among the additional characteristics, it is also worth noting support for SMS messages, notifications using an indicator, the presence of a slot for a memory card up to 32 GB, as well as work with the operating systems MacOS X, MacOS Sierra and Windows.

Advice! You can buy a modem from another seller and use it with a Megafon SIM card, but for maximum connection quality, the original device is recommended.

3g modem Megafon

The first devices for 3G Internet appeared in the company in 2011. They supported speeds of up to 14.4 Mbit/s. Of the main classes of the first modems, e1550 and e352 .

Then a new class of equipment appeared that supported speeds of up to 150 Mbit/s. Popular models are m100 3, m100 4 and m150 1 . But with the advent of 4G Internet in Russia, the company began to produce the only device to work with all technologies.

Starting a modem with a “foreign” SIM card

After completing the flashing procedure, you can begin checking the device for functionality with a new card from another operator. The check is performed as follows:

Run a program optimized for working with the Megafon modem (installed along with the device driver).
Make sure that in the upper left part of the interface there will be information about the operator whose SIM card is installed in the modem. For example, it could be Beeline or MTS.
Click Connect and connect to the Internet.

If you suddenly have problems connecting to the Internet, you can use a third-party driver to operate the modem. You can install it from the same folder that you unpacked from the provided archive. You should run the “Setup.exe” file and install the appropriate program. In the program, you need to select the operator that interests you and click on the “Connect” button to connect to the Internet.

Please note that the information herein is provided for informational purposes only. The site administration does not bear any responsibility for its use.

USB modem E173

Many people do not understand life without the Internet. But in order to access the Internet you need only 2 things: a PC (laptop, tablet) and a USB device. Today, one of the popular USB devices is the Megafon E173 modem.

A USB modem will be very useful in cases where you need to connect the Internet not to a desktop computer, but to a laptop and use it online outside the home. The device has a beautiful stylish and convenient design. Its advantage is that the e173 modem device program is already equipped with all the necessary components for operation.

If something is missing, a driver for the Megafon e173 modem can always be found on our website.

download the application for Megafon modem e173 and instructions for its installation;
carefully study and install on your computer;
start searching for information or work on the Internet.

3G modem Huawei (Huawei) E173 and E173U-1 - Description, firmware, AT commands, unlocking

The Huawei E173 3G modem is a complete analogue of the Huawei E171 modem with minor design differences:

This model was supplied as a proprietary modem by telecom operators: Megafon, Beeline, Tele2. It, like the Huawei E171, has a slot for microSD memory cards up to 4GB.

Device information: Chipset: Qualcomm MSM6290 Data transfer rate HSDPA (7.2 Mbps download / 5.76 Mbps upload) EDGE (236.8 kbps download / 118.4 kbps upload) GPRS (80 kbps download / 40 kbps upload) Frequency range HSDPA/UMTS - 2100 MHz EDGE/GPRS/GSM - 850/900/1800/1900 MHz Interface USB 2.0 Dimensions: 72 mm x 12 mm x 25 mm Weight: 50 grams

How and where to buy

Megafon SIM card for 4G modem is available to every user! The cards are freely available; you just need to choose the appropriate tariff plan and purchase a plastic carrier. Let's briefly look at the operator's available tariffs?

Your unlimited for 6 months:

Unlimited traffic;
Subscription fee for six months – 5,000 rubles.

Your unlimited for 12 months:

Unlimited traffic;
The annual subscription fee is 9,000 rubles.

Online:

There is no subscription fee;
1 MB of Internet – 2.5 rubles;
Additional options available: 7 GB/15 GB/30 GB for 500/750/1000 rubles.

You can purchase a Megafon SIM for a modem at the operator’s sales showroom - find a suitable office on the map! Don't forget to take your passport with you and contact a specialist for advice.

Huawei E173 and E173U-1 firmware from Megafon for unlocking:

Attention! You do all actions at your own peril and risk. The site administration is not responsible for damage to the device as a result of your actions. This instruction does not work with firmware version 21.156.00.00.143 and 21.157.00.01.143 Modems with firmware 11.126.16.17.209 cannot be unlocked using standard methods. The unlocking method is listed below. HUAWEI E173 LIFE UKRAINE and MTS UKRAINE are currently not unlocked either for a fee or for free.

To unlock a modem with firmware 11.126.15.00.209, you must first reflash the modem to version 11.126.85.00.209. You can get the firmware here - link (file huawei_e173_e173u-1_firmware_update_11.126.85.00.209_B427.exe). 1. Download this archive. 2. Remove the SIM card from the modem and connect it to the computer. 3. Launch the v4mpire_unlocker program from the archive.

We feed the IMEI code of the modem to the program and write the Flash and Unlock code into a notepad. 4. Run the file huawei_e173_e173u-1_firmware_update_11.126.85.00.209_B427.exe. He will ask for the Flash code we wrote down. We enter it and wait for the flashing result. 5. Disconnect the modem from the computer and reboot it. 6. As soon as the computer reboots, connect the modem again and launch the program huawei_e173_dashboard_utps11.300.05.21.343_B416_v. 3.17.00.exe. Here you may also be required to enter a Flash code. 7. After the utility has worked, remove the modem again and reboot the computer. 8. As soon as the computer reboots, insert the SIM card into the modem and connect it. A proprietary utility from Huawei will launch, which may ask you for the Unlock code. After that, we set up the program and get to work!

For those who use regular software from Megafon After installing proprietary software, some subscribers may have a problem - there is a connection to a telecom operator, but there is no Internet access and the pages do not open. To solve this problem, you need to do the following: 1) Connect the modem to the PC, but do not connect to the Internet. 2) Launch the “MegaFon Internet” utility and select the menu item “Tools” - “Options” - “General”. 3) In the “Connection Type” item, select the “RAS (Modem)” type instead of “NDIS” and click the “OK” button. 4) If necessary, reconnect the modem to the computer. This problem occurs among many subscribers who own Huawei e173, e1750 in the Windows 7 and Windows 8 operating system.

How to unlock 3g modem Megafon E173 with firmware 11.126.16.17.209

Step 1. You need to get the New Algo NCK code here or search on the Internet. Step 2. Enter the AT command into any terminal (for example DC-Unlocker or Hyper-terminal):

Press the Enter button. As a result, you should receive the answer: OK. 3. Disconnect the modem, reboot, connect and check its status.

Unlocking via IMEI without SIM card

For this method, you need to download 3 programs, namely: Imei Huawei calculator, Firmware and Dashboard. Next you need to follow a special algorithm:

First you need to launch the calculator and enter Imei (usually it is located under the cover where the SIM card is inserted) into a special field, then click “Calculcate”.
The program will issue two codes, namely “Unlock code” and “Flash code”, only the latter is needed.
The next step is to remove the SIM card, connect the modem to the PC and launch “Dashboard”, agreeing to the license terms. After identifying the modem, you need to click “Next” to start the firmware.
Next, you need to launch the “Firmware” program and also agree to its terms and click the “Next” button so that the program detects the modem. After detecting the modem, it will ask for the firmware code, this is where you will need the flash code that was discovered using the calculator. You need to enter this code and click “OK” to launch the firmware.
After the firmware is completed, you need to download the Megafon Internet program and configure it for the new operator. The modem will work with any of them.

During the firmware installation, in order to avoid problems, it is better not to turn off the computer.

AT commands for Huawei E173 3G modem:

We switch the devices to “Modem only” mode, the virtual disk and card reader are disabled:

on this 3G modem model, the command at^setport=”a1,a2;1,2,3″ replaces the same command AT^U2DIAG=0? for other Huawei modems. Applicable to all modems of the new line of E3xx series and Huawei E173 with software version 21...

Before using the command it was like this:

at^setport? ^SETPORT:A1,A2;1,16,3,2,A1,A2 at^getportmode ^GETPORTMODE: TYPE: WCDMA: huawei,MDM:0,NDIS:1,DIAG:2,PCUI:3,CDROM:4, SD:5

And after application - like this:

at^setport? ^SETPORT:A1,A2;1,2,3 at^getportmode ^GETPORTMODE: TYPE: WCDMA: huawei,MDM:0,PCUI:1,DIAG:2

If your Huawei E173 modem is not detected in Windows 8 or Windows 8.1, the solution is to switch the device to modem+card reader mode:

To return the modem back to modem+cardreader+disk mode:

Switching the modem operating mode: 3G only:

Design

Consumers have only one complaint about the design of the Huawei E173 device. They don't like the thickness of the modem. The extra two millimeters will be invisible when using the device with a laptop, but when using a netbook they will be very noticeable. The port does not become loose, but the appearance is spoiled. A rotator joint would be appropriate. It would obviously be useful for such a modem.

Thin netbooks will sit unsteadily on a solid surface, resting on the device you're using. Of course, such PCs are now rarely used, but they have a drawback.

Main characteristics of the device

System requirements: Windows XP, Windows 2000 SP2, Microsoft Windows 2000 SP4, Windows Vista, Mac OS X.
GPRS, EDGE, HSUPA 5.7 Mbit/s, HSDPA 7.2 Mbit/s.
UMTS 2100, GSM 850, GSM 1900, GSM 1800, GSM 900.
Balance request, SMS work.
Automatic Plug-n-Play installation.
A 3G wireless system with Megafon e173 is possible subject to the Megafon network.
Space for using a Micro SD memory card.
Voice call capability

Programs and drivers

Next, you need to download the Connect Manager e173 program (aka driver):

Download instructions for e173 and software and driver updates from the links below:

A consistent, necessary update will allow:

improve the performance of a wireless USB device;
provide new functions;
increase data transfer speed;
correct defects, malfunctions, etc.

Firmware for Megafon modem e173 for all operators

Using programs for megaphone modem e173, you can flash or unlock the device. This operation is carried out without a SIM card.

Option 1. To unlock the e173 and e173u modem:

Rar archive with utilities and firmware - DOWNLOAD;
Remove the cover from the modem and connect the E173 without a SIM card and a flash card;
We close all programs running on the computer;
Open the v4mpire_unlocker file from the archive and enter the IMEI found under the modem cover into the program and click Calc;
We save the issued Flashing and Unlocking codes in a .txt document;
Open the program huawei_e173_e173u 1_firmware_update_11.126.85.00.209_B427;
Enter the Flashing code and wait for the program to finish what it started;
We remove the modem from the USB port and restart the computer;
Re-insert the modem into the USB;
Find and install from the archive huawei_e173_dashboard_utps11.300.05.21.343_B416_v. 3.17.00.exe, when the program asks you to enter the flashing parameter, find it in the saved file and install it;
Remove the modem again and reboot the computer;
And finally, after rebooting, insert your modem into the USB port, wait for the e173 shell to automatically start, reinstall the Huawei program from the device;
Install a SIM card from any operator and start connecting to the Internet. If the operator you need is not there, add it to Options > Edit Profile. All information for filling out forms is located on the official website of your telecom operator.
Enjoy and stay tuned!

The Huawei_e173р driver, just in case something goes wrong, you can download from the link.

You consciously accept responsibility for your actions with your equipment. Think carefully before proceeding to point 1.

Option 2. Another way to unlock the e173 modem from Megafon

Watch the video and repeat. Archive with software - here!

You consciously accept responsibility for your actions with your equipment. Think carefully before you take action.

Activating the Megafon modem directly

When purchasing a 3g or 4g device and the corresponding SIM card, the communication salon employee uses his PC to initially activate the modem purchased by the client. But the user must also activate the device on his own computer or laptop in order to access the Internet.

To do this, you need to carry out the following procedure:

Place the Megafon modem in any free USB port (insert the device so that it does not interfere with your work at the computer).
Wait until the software installation wizard welcome window appears on your desktop.
Carefully read all the download options and select the ones you personally need.
Select the folder in which the software will be installed.
Click the checkbox next to the line “Accept the terms of the license agreement.”
Start the process with the “Install” button.

After installing the software (usually this does not take more than a minute), you can start connecting to the network by clicking on the desktop shortcut or launching the program from the Start menu.

Firmware for USB 3 G modems Huawei E171 and E173 such as: Beeline, Megafon, MTS.

When unlocked, the Internet speed may increase, I personally did not notice this on my modem, although the model is different ZTE MF627. My colleague Palych, having a Huawei ZTE E171 usb 3g modem with him, successfully flashed (unlocked) it. He says that even the speed of the Internet has become much faster from his modem. Everything is possible, I don’t argue, by the way, here’s a material on increasing the speed of the Internet by running one AusLogics BoostSpeed program. Once upon a time I had low speed with ADSL, this program saved me.

Okay, we understand everything about speed, now let's proceed to unlocking or as they say, to flashing the firmware of a usb 3g modem? whoever likes this term. Let's start with the fact that the Beeline modem operator does not request an unlock code. Using the “ HUAWEI_MODEM_Code_Writer ” and “ unlock ” programs, entering the code is useless, you will not get any result. You just need to update the “Firmware” version using FlashCode (if it asks for a password).

Methods for activating the subscriber identification module

A user of the Megafon operator's services can connect an operator's SIM card in several ways, including self-activation and through the use of the help of company specialists.

Operator salon

A subscriber using Megafon as an operator can connect a SIM card by purchasing a standard SIM package through the customer service salon of the cellular operator or contact Megafon some time after purchasing the card - you must bring a passport confirming the subscriber's possession of this SIM. Having fulfilled the specified conditions, the subscriber service department specialist will launch the card.

Sending ussd request

To use this method, you need to dial the SIM activation code on your phone. It looks like this:

*121*PUK code*phone number# and “call” button

The mobile phone that needs to be activated is indicated. The PUK code is located under a protective cover in the accompanying documentation of the card. There you can see your number. Activation can be done from any phone, the main thing is to enter all the data correctly.

Registration in the service guide environment

There you need to register, which consists of entering a password and phone number. Since you are going there for the first time, you do not yet have an access code, enter *105*00# and “call” on the device’s keyboard. You will receive a password to enter your personal account. As soon as you go there, your card will be activated.

Unlocking 3G modem HUAWEI E171 - E173 in 4 steps.

Let's start downloading programs for unlocking, and this is Imei Calculator Huawei.
We calculate the firmware code.
Now we are starting to unlock the USB 3G modem HUAWEI E171 - E173.
We look, the modem is unlocked for all SIM cards of operators, as I said earlier, the speed has increased.

Now pay attention, I am laying out 4 points in more detail.

Let me make a reservation right away: the 3G USB modem E171 and E173 are completely identical in hardware, which means the E171 USB modem can be unlocked using the E173 firmware, and the Internet speed will increase. After this operation, unlocking, the modem will be identified as E173. So.

1. Downloading programs:

Huawei Imei code calculator 184 KB download

Firmware for 3G USB modem Huawei E171, E173 8.2 MB Download from Deposit

Firmware (Dashboard) 3G USB modem Huawei E171, E173 45.3 MB Download from Deposit

If anyone does not have this version of the Dashboard installed, then download another version Download from Deposit

2. Once everything has been downloaded, first of all we launch the calculator program (see figure). We find the Imei of the modem, which is located under the cover, where your SIM card is inserted; if not, then look in the modem program.

After that, once you find the name, enter it in the field called IMEI (15 digits). After that, click on the “Calculate” button. Below, this program will give you 2 codes. We will need the “Flash code” (second from the bottom, underlined with a red stripe). Copy the code or remember it.

How to unlock 3G modem Megafon E173 with firmware 11.126.16.17.209

The first step is to generate an unlock code using the IMEI of the modem using the Huawei online calculator. Next, using a “foreign” SIM card (that is, a SIM card from another operator, not the one from which the modem was purchased), you need to connect it to the computer.

After this, the control program will launch and require you to enter a code. In the window that appears, you must enter the unlock code you received earlier. After entering the code, the lock should be removed.

Another name for the unlock code is nck code.

Activating a SIM card for a modem

To gain access to the Internet, the owner of a 3g or 4g device must become a full-fledged activated subscriber of the telecommunications company Megafon. To do this, you need to activate the purchased SIM card with a suitable Megafon tariff plan, after inserting it into the modem.

To place the card in the device, you will need to remove the cover that protects the SIM card slot. The chip must be inserted into the slot with the beveled side out and the side with the gold contacts facing down. After this, you need to connect the modem device to the computer and begin activation.

Click on the shortcut for the program installed during direct connection of the USB modem.
Go to the Megafon website and make sure that the user registration form in the system is open in front of you.
Fill in all fields with the required information. You will be required to provide a password, module number and some personal information.
Make sure the process is complete by trying to access the Internet through your new device.

An alternative way to register a SIM card is to send a special USSD request *121*PUK1*SIM_number# You can find the PUK code of your chip under the protective layer of the plastic “card” where the SIM card is located before purchase. Please note that the request should be sent with the card inserted into the device.

You can also carry out a similar procedure in the operator’s communication stores. This can be done directly upon purchase, as well as after a certain period of time has passed since the purchase of the sim. You can activate the module in the salon only if you have an identification document (passport), which will confirm your right to own this chip and perform further actions with it.

Change imei on Huawei E173

In this article we will talk about changing imei on Huawei E173

In short, in the case of the Huawei E173 modem, the following options are possible: 1.

Using AT commands:
AT^DATALOCK
,
AT^CIMEI
and
AT^NVWR
2.

Through
Qualcomm Product Support Tools (QPST)
3.

Through a specially assembled
HUAWEI DataCard Update Wizard
4.

Using
JTAG
programmer

Each of these methods may not work due to the presence of protections in the software/hardware, but those who really need it will find a method that is suitable for their case and works. I would like to dwell in more detail on method number 3

, because methods 1 and 2 did not work for my modem, and I didn’t have time to get to JTAG, it’s better to always leave it as a last resort