Some AirPods owners may have sometimes noticed that their headphones suddenly became quieter. Moreover, the problem is not at all that the AirPods are faulty - sometimes iOS itself limits the maximum volume level, and it is enough to know a few tricks that will help fix the problem. Often, the problem may even be a low iPhone battery. Therefore, if you suddenly notice a decrease in the volume of your AirPods or AirPods Pro, the tips below will help you figure out what the reason is - whether you need to go to a service center or just tweak something in the settings.
There are some tricks that may be useful for AirPods owners
How to adjust volume on AirPods
When your iPhone's battery is running low, iOS may decide to lower the maximum volume to extend battery life. This is a feature of the power saving mode, but the feature only turns on when your battery is really low.
If your iPhone's battery is charged and you activate Low Power Mode from Control Center, you probably won't hear any difference. However, if you turn it on when the battery is low, it may affect the volume. Sometimes one AirPod starts playing quieter than the other - and here's how to fix it.
- Open "Settings";
- Go to “Universal Access”;
- Scroll to the Audiovisual Element menu;
- Check the "Balance" item.
If your balance is off, adjust it
If the balance slider is not quite in the middle, you will notice a difference in volume. Adjust it.
One earphone became quieter than the other
If the sound of one of the AirPods has become noticeably quieter than the other, there may be one reason:
- The earphone is simply discharged , and you need to put it in the charging case.
- The earphone is dirty . Check for dirt on the openings and for dust, debris, or lint between the speaker grilles. Found stains can be carefully cleaned with a soft, dry brush (a toothbrush will do) or a cotton swab.
If after this the sound from the problem earphone is still quiet, the AirPods will have to be sent to a service center for repair.
How to increase volume on AirPods
Often, AirPods owners don't even realize that the volume on their headphones is limited. The fact is that there is such an item in the settings of the iPhone itself, which is called “Volume Limit”. I discovered that the feature was enabled on my iPhone, even though I clearly remember not activating it. Check it out too.
- Open "Settings";
- Go to “Music”;
- Scroll to the Volume Limit menu;
- Go into it to make sure the restriction is turned off.
Volume may be limited on some iPhones
Please note that in order to see whether this menu is on or off, you must go to this section. And inside, adjust the slider to the desired position. This way you can either increase the volume on AirPods or decrease it - for example, on a child’s device.
It is up to you whether you enable this setting or not. But still, it was not for nothing that they were provided for - do not forget that high volume has a negative effect on hearing.
The iPhone has a built-in hearing test function, which will not only allow you to competently prevent damage to delicate organs, but will also allow you to understand whether you have progressive hearing impairments.
Everyone needs attention and care, even the Apple wireless headset
Don't wait for AirPods to start sounding quieter, keep an eye on them from the first day of purchase. Do not leave chairs or chairs outside where people may sit on them and step on them. Try not to get caught in the rain (and especially not in the shower) with them in your ears. Don't forget about the hygiene of your own ears - this is necessary not only for the excellent sound of your headphones, but also for your health.
Be sure to check the devices when purchasing. If in AirPods one earphone plays quieter at once, this is a defect (provided that the balance is set, of course). This type of headset must be replaced immediately.
Have you tried cleaning your wireless devices with ear sticks or toothpicks? Share your experience.
And at the same time, show our article to your friends so that they know exactly what to do if the sound distribution in an expensive headset is inadequate.
How to fix AirPods volume problem
Sometimes headphones may freeze at a certain volume level, which is due to a firmware bug. You can try to fix the problem yourself.
- Put on your AirPods and play some music;
- Reduce the volume to zero;
- Go to “Settings” - “Bluetooth” and find AirPods there;
- Click on "i" and select "Disable";
- Continue playing music on your iPhone speakers;
- Reconnect your AirPods;
Reconnect AirPods to solve the problem
Checking the sound balance settings between the right and left headphones
As I wrote above, the volume balance between the right and left channels may be off. There are such settings in Windows settings on phones. But this happens very rarely. If you determine (by connecting the headphones to another device) that this is the problem, then you need to check and adjust these settings on the device that is experiencing problems.
Tip: if there are hardware problems with the sound volume on one earphone and you can’t fix it, then by changing the balance on the device you can even out the sound. Make the volume the same in both headphones.
Windows 10
Connect your headphones to your computer. Right-click on the audio tray icon and select Open Volume Mixer. Next, click on “Headphones”. In the new window, go to the “Levels” tab and click on the “Balance” button.
Set the same balance for the left and right headphones.
Android
On Android phones, you can adjust the sound balance in the “Special” section. capabilities" in settings. There should be a “Hearing” item where you can adjust the balance between the left and right channels.
iOS (iPhone, iPad)
On an iPhone, you can adjust the volume balance between the left and right channels in the settings, in the “Universal Access” – “Audio Visualization” section.
Just move the slider to the left or right.
How to remove rattling noise from AirPods
AirPods owners often complain about crackling noises and some extraneous thoughts in their headphones. The fact is that Bluetooth technology, like any radio signal, is subject to interference, such as static noise or crackling.
You can solve the problem as follows:
- Unplug or turn off other unused Bluetooth devices around you.
- Reboot your headphones.
- Unplug the headphones for 30 seconds, then plug them back in.
- Reduce the distance between your smartphone and your headphones, as this will also help reduce (or even eliminate) any static interference.
If this method does not help, check if there is a software update for your AirPods.
AirPods, Windows and quiet sound
Connecting AirPods to Windows, but the sound is “so-so”? There are three simple tips:
- Update Bluetooth drivers. It's always useful!
- Adjust the equalizer. Either use the “standard” Realtek, or install some alternative program.
- Use AirPods in Headphones mode. Because when you select “Headphone”, the microphone is activated, but the sound deteriorates - it becomes very dull.
By the way, regarding “Headphones” and “Headphone”.
There is no solution to this problem at the moment.
Well, AirPods are not “friendly” with Windows to such an extent that the sound is good and the microphone works as it should. Therefore... either high volume (Headphones mode), or a microphone and weak sound (Headphone mode).
Microsoft. Apple. Well how is that? :(
How to update AirPods?
To install a new version of the software, you must:
- Place the headphones in the charging case
- Close and open the case
- The last paired device (iPhone or iPad) must be placed next to the headphones. For everything to be successful, you should make sure that the device has access to a stable Wi-Fi point.
The entire update process will only take a few minutes. Unfortunately, it is impossible to start this procedure manually.
Often, in order for AirPods or any other Bluetooth headphones to lose connection with your smartphone less often and not stutter, you just need to turn off the Wi-Fi module on the iPhone to which the accessory is connected. If you know any other features of working with AirPods, share them in the comments and in our Telegram chat.
Activating the AAC codec on Android
How to connect AirPods to Windows 10 or 7 on a computer
The AAC codec itself was created in 1997. It was positioned as a higher quality audio compression format than MP3. Today it is used in almost all programs on Apple and is part of its ecosystem. In Android there are often problems with it. Until Android 8.0, this codec was not supported at all.
Important! It is this system that often prevents you from listening normally to sound on wireless headphones.
To activate AAC on Android you need to:
- Go to the developer menu.
- Find the item “Audio codec for transmission via Bluetooth” and select it.
- Specify the required audio codec from the list (LDAC, apt, aptX, AAC, SBC).
Setting the “Audio codec for transmission via Bluetooth” option on Samsung
Thus, it was explained how to connect wireless headphones from Apple to an Android device and what to do if the sound on them suddenly became quiet. There is only one reason for this - the specific work of Android version 8+ with wireless Bluetooth headphones. But we can fix everything.
Main reasons
In order to correctly and reliably troubleshoot problems, the reasons behind the malfunction must be correctly identified.
If the cause of the problem lies in the headphones, there are the following possible causes:
- Lack of cleaning - sound propagation is hampered by deposits of dirt, dust and earwax;
- In Chinese devices, the speaker can quickly demagnetize;
- Check if the sound card is ok; contact service specialists if you cannot do this yourself;
- One earphone works, but the other does not, due to incorrect settings on the device;
- Closes contacts;
- The cord is damaged;
- The headphones themselves are damaged - for example, water got into the speakers;
- You're using high-impedance headphones to play audio from a portable device, and they require a completely different voltage level.
Check how well the headphones work when connected to different devices. If the sound volume only drops when connected to one specific device, check it. Perhaps the headphones have become quieter due to problems located in the device. Just in case, check your settings. If necessary, change the volume mode or shift the balance between headphones.
Why did the headphones start playing quietly? Sometimes the problem is not in them at all, but it is noticed precisely while using the headset, since your attention is more focused on the perception of the hearing organs. It happens that the causes of problems are not in the equipment, but directly in its user. Your hearing may be tired. Rest, wear headphones less often, or better yet, give yourself a full break from them for several days. If you begin to realize that the problem is definitely in your hearing, and it does not go away after a break, pay a visit to the doctor.
If the bass in the headphones has disappeared, and the rest of the sound has died down, and even the stereo does not work correctly, the ground wire is probably damaged. It can be recognized thanks to its golden plating. Try gently bending the wire at the electrical connector to accurately determine the cause and location of the breakdown. A broken wire at the plug itself is the most common cause of a malfunction.
The most common sound glitches
There are a number of very common problems with AirPods that, to a greater or lesser extent, can be easily resolved by the user. Although in some cases it is necessary to contact technical support. And these are bugs that, as we have already progressed, may be present in AirPods, AirPods 2, AirPods 3, AirPods Pro and AirPods Max.
- Static or squeaking sound when you put the headphones on your ear or while playing content.
- Condensation is a particularly noticeable glitch in the AirPods Max, which unfortunately has no other solution other than cleaning the earbuds.
- The sound is canned or gives the feeling of listening to content in a room with a lot of echo and reverberation.
- Very low volume in both headphones, even with the volume maxed out and checking that the track being played can be played at high levels.
- One earphone sounds louder than the other , something that doesn't happen as often in the 'Max', but it does across the rest of the earbuds' range, and no matter how much the volume is adjusted, balancing is impossible.
How to connect wired headphones from iPhone to Android?
USB-C to 3.5mm Headphone Adapter allows you to connect 3.5mm headphones and other audio devices with a USB-C port. Plug the USB-C to 3.5mm headphone adapter into the USB-C port on your device and plug the other end into headphones.
Interesting materials:
How to connect your phone to a Sony TV via Wi-Fi? How to connect your phone to Sony Bravia TV via USB? How to connect your phone to a Sony Bravia TV? How to connect your phone to a Sony TV via bluetooth? How to connect your phone to a Sony TV? How to connect phone to tcl tv? How to connect your phone to a Thomson TV? How to connect your phone to a Thomson TV? How to connect your phone to Toshiba TV via USB? How to connect your phone to a Toshiba TV?
How to clean wax from Airpods?
Cleaning AirPods and AirPods Pro
- Wipe them clean with a cloth lightly dampened with clean water and dry with a soft, dry, lint-free cloth.
- Let them dry completely before placing them in the charging case.
- Do not attempt to use the headphones until they are completely dry.
30 Dec
2022 Interesting materials:
How to clean carpet from pet hair? How to clean cat hair from carpet? How to clean slime from carpet? How to clean candle wax from carpet? How to clean carpet from dirt? How to clean a carpet at home with soda? How to clean a carpet at home? How to clean carpet? How to clean carpets? How to clean a leather chair?
