Any gadget runs on a power source. Typically this is either a battery or an accumulator. The energy in these components runs out over time, resulting in the need to recharge. Otherwise, the device will stop working. How to charge Apple Watch? This smartwatch works for a certain time, after which it needs to replenish the battery power. Fortunately, there is nothing difficult in the mentioned operation. And everyone will be able to cope with the task without much hassle.
Checking the battery
How to charge Apple Watch 4? First of all, you need to make sure that the battery needs to be replenished. Otherwise, the battery may be damaged. Then it will quickly discharge, which will cause a lot of inconvenience.
To check the battery level of an Apple smartwatch, you will need to move from bottom to top on the main screen of the device. The device control panel will appear on the display. The battery energy level will be shown at the top.
Important: When the battery charge is low, a lightning icon appears on the device screen.
Checking the remaining battery charge
To view the remaining charge, touch and hold the bottom edge of the screen, then swipe up to open Control Center. To make it even faster to check the remaining charge, add an extension with information about the battery status to your watch face. See Customize your watch face.
What types of chargers are there?
How to charge Apple Watch? It should be noted that to implement the task, the user can use a variety of devices. But which ones?
At the moment, smartwatches can be recharged via:
- docking station;
- special case;
- cable with round fastening.
As a rule, everyone decides for themselves what method to solve the initially posed problem. Therefore, all existing options for the development of events will be presented below.
On your own
To bring the device back to life, you can try a forced reboot. Press the button for a few seconds and swipe left and right to turn off the device. We are waiting for it to turn on. After such actions, we put it on charge again, and if it works, then we should congratulate you.
You can try another method. Check the back of the watch for dirt. If it is present, then you need to clean the surface with a clean and dry cloth, and then put it on charge again.
At this point, it is best to contact specialists who can diagnose your device and identify problems.
Through the wires
Wondering how to charge Apple Watch 3 and more? Then it’s worth paying attention to all sorts of methods for solving the problem. The simplest and most convenient is to use a special cable with a round mount.
To achieve the desired result, a person will need:
- Take the watch off your hands. Some people don't do this, but the manufacturer recommends not wearing the smart device while charging.
- Attach the round mount to the back of the device.
- Connect the wire to a power outlet or USB port.
- Wait a little.
That's all. This, as already mentioned, is the simplest method of providing energy to the battery of an Apple smartwatch. True, this approach is far from the only one.
iPhone battery drains within a few hours
A possible reason for the rapid decrease in charge on the apple is clogged RAM. In this case, a complete reboot of the device helps.
- You need to close all applications on your phone. Double-tapping the Home button opens a panel with running apps, which you can stop by swiping up on the icon. As a result, only the main screen should remain.
- To reboot, you must press the Home button and the On/Off button at the same time. You should hold them until the screen goes off.
If the above method does not help, then the problem lies in the hardware of the phone. The battery capacity may have decreased due to prolonged use of the device or mechanical damage. In this case, you must contact a repair service to troubleshoot the problem.
Station to help
How to charge Apple Watch Series 4? Some quite successfully use special docking stations to achieve the desired goal. The main thing is to know how they work.
Let's assume that the owner of an Apple device decided to use the docking station. To charge the smartwatch, he will need:
- Make sure that the battery really needs to be recharged. As soon as 10% power remains, a red lightning bolt appears on the display.
- Turn on the docking station.
- Remove the watch and put it on a special holder.
Now all that remains is to wait. It is not recommended to use the corresponding device while charging.
The watch is not charging
If the charge indicator is not lit or a message appears on the screen indicating that the charger is not supported, follow these steps:
- Check that the USB connection to the device is correct. The adapter must fit completely into the clock socket and be inserted correctly into the socket.
- Make sure that you are using an original charger that is suitable for your Apple watch model.
- It is recommended to remove the plastic film from both sides of the charger.
- Inspect the device and charger for dirt on both sides.
- You can check whether the charging process is in progress by placing the back of the Apple Watch on the charger. A corresponding icon in the form of a lightning bolt should appear on the gadget’s screen.
If the watch still does not charge, you need to perform a forced reboot or use another charger, as it may be faulty.
Case and recharge
Do wireless chargers charge Apple Watch? First, let's take a look at the special charging cases. These wireless devices help keep your smartwatch in working condition at all times. But how to use them?
Typically, for this charging method you need:
- Charge the case using any available method. For example, using a special cable.
- Open the case and put your Apple watch in it.
- Close the accessory.
At this stage, active actions can be completed. The user will be able to maintain the watch in working condition, and will also provide it with reliable protection from damage.
Important: The charger case is not included with the Apple Watch. You will have to purchase it yourself.
Apple Watch freezes and crashes
Rare freezes can be removed by rebooting the smartwatch, which is done by turning off the gadget for a while and then turning it back on.
Another troubleshooting method is to update the system. To do this you should:
- Press and hold the side button and the Digital Crown at the same time; as a result, the Apple logo should appear on the screen;
- The “Clock” application opens on the phone, then the “My Watch” section - “Basic” - “Software Update”;
- After opening the update section, the screen will display information about possible innovations that need to be installed.
Applications are often the cause of device malfunctions. In this case, the gadget will not function correctly at the moment when the program is open. To troubleshoot problems, you need to remove the software in this way:
- open the Clock app on your iPhone;
- find a “malware” program in the list;
- disable the program display mode on the watch.
In some cases, resetting the settings to the factory version may help.
Power supplies or wireless chargers
How to charge Apple Watch without charging? At the moment, this can be done using special devices. For example, cases with batteries. Moreover, a special strap for smartwatches is in development, which will allow you to replenish the device’s battery without removing it. For now this is just a project.
Some people are wondering whether it is possible to use wireless chargers and special power supplies to accomplish this task? Nowadays such devices are used quite often. For example, to replenish the energy of a phone or tablet. Very comfortably!
In the case of the Apple Watch, this technique will also work. The mentioned device can be charged quite successfully from wireless chargers. True, it is better to use a charger case for this task. They are simply more convenient to use.
First charge
My new watch arrived completely discharged. Moreover, even when connected to power, they did not react for a long time, I even got a little worried, but during this time I found out that this behavior of the watch is normal. If your Apple Watch smart watch has been discharged for a long time, but it needs at least 30 minutes to be charged enough to be turned on. After turning on the watch, it is better to charge it to 100% charge. At this time, you can make the first settings for Apple Watch. Then put it on your hand and start using all the functionality.
Charging occurs using a magnetic charger, which is included in the kit. The magnet sticks to the back of the watch and charges it. Pretty fast.
How much to wait
How to charge Apple Watch? Now this task will not cause any problems. True, it is worth paying attention to some nuances of the operation.
For example, how long to charge a smart watch. Today, this process takes on average 2–3 hours and no more. Accordingly, the mentioned device will work for a long time after a short wait.
Important: It is not recommended to leave the watch charging all night. This is not good for the battery.
How long does it take to charge an Apple Watch?
Those who already have an Apple smartwatch have long noticed that the charging speed depends on the condition of the battery. So, if the battery is completely discharged, charging occurs very quickly, approximately 1% in 60 seconds. But as soon as the battery is charged to 80%, the rate of energy replenishment drops by a factor of three and the remaining volume takes as much as 40 minutes to charge. On average, it takes about 2 hours to charge from 0% to 100%.
Energy mode
It also happens that the Apple Watch battery runs out of charge at the most inopportune moment, especially when there is a need to know what time it is. How to get out of this situation if you don’t have a charger case or a portable charging station at hand?
In this case, it is recommended to activate the energy mode (eco mode). It turns on automatically when the battery charge drops to 10 percent. It can be activated manually through the control panel (opened by moving from bottom to top on the device display).
What happens when energy mode is activated? The current time watch face will be successfully displayed for 24 hours. Only in this case all options for synchronizing watches with Apple devices are disabled, and the restriction of some accessory options is also activated.
How to properly charge your Apple Watch and prolong its performance: 3 best tips
There are times when it is not possible to quickly recharge an Apple watch, and completely turning off the gadget is clearly not an option. In this case, a selection of tips for extending the battery life of an Apple smart watch will come to the rescue. It’s worth remembering them, or better yet, trying them out right away, so that if necessary, the process goes “automatically.”
Eco mode: operation and activation
The function saves battery power, but limits the use of many options, for example, it excludes synchronizing the watch with the iPhone. That is, the gadget only performs the role of a regular watch - it shows the time. To view it, press the button on the side of the case.
The chronometer itself suggests using eco mode when the charge reaches 10%. If the user does not confirm the action, the watch automatically switches to battery saving, starting from 9%. The owner of Apple Watch can turn on/off eco mode earlier, at any stage of work.
| Enable eco mode | Turn off eco mode |
| Swipe up the watch face and click on Control Center. The charge percentage will appear. | Press and hold the side button for a few seconds. |
| Click on the digital charge value. | Wait for the watch to reboot. The mode will turn off on its own. |
| Move the Eco Mode slider and click the Continue button. | If the battery has a low percentage, you will need to charge the battery first. |
Remove animation
The animated watch face takes up the lion's share of the Apple device's battery charge. This is especially noticeable if you do not use other functions. It is logical that by turning off the animation, you can significantly extend the battery life.
Manipulations are carried out via iPhone:
- Open the Apple Watch app on your iPhone and select the line with the name of the watch;
- click on “Basic” – “Universal access”;
- Pull the movement slider to minimum.
You can initially set the dial without animation, but this is a matter of taste. Many users find it difficult to resist the cute dancing Mickey Mouse on the screen, which is why the animated dial is still popular.
Results and conclusions
The article found out how to properly charge the Apple Watch. All possible options for charging the smartwatch battery were presented to your attention. Now everyone can use them when needed.
For safety reasons, it is recommended to use only branded chargers. Fake Chinese analogues quickly break down and also malfunction. Sometimes they can damage smartwatches. Such cases are actively recorded, but so far they do not occur too often in practice. But it’s better not to risk your gadget.
How to charge a phone without charging if the socket is broken and the battery is not removable?
Take a regular kitchen knife and heat it on the stove, but do not
get carried away.
The knife needs to be hot, not
scorching hot.
Apply the knife to the battery for a while, most likely it will kill the battery, but it will give a little interest if it is
absolutely necessary to make a call for about 5 minutes. IMPORTANT!
Interesting materials:
How to remove the system weather application? How to remove Youtube system application? How to delete the Mac OS system folder? How to delete Android system files? How to delete system files on MacBook? How to remove Google system applications? How to remove Huawei system applications without root rights? How to remove system applications on Android without root rights? How to remove system applications on Honor? How to remove system applications on Meizu?
Battery INTERSTEP PB20Qi
If you need a larger battery, then look at the INTERSTEP PB20Qi model with 20,000 mAh. It has exactly the same design, but higher capacity.
Thus, we get a pair of USB Type-A, Lightning for charging the battery and USB Type-C for charging the battery itself and any other devices when the cable is connected. We get the function of fast charging, wireless charging, and “low current charging” mode for accessories with a small battery, for example, Bluetooth headphones.
It turns out that both models PB12Qi and PB20Qi are convenient for charging not only Android smartphones, but also iPhones, since we use a Lightning cable to charge the Power Bank.
Please note that when your iPhone is charging wirelessly, a red LED will indicate fast charging.
How many times will it charge
- iPhone 8 Plus/X/XR/XS/XS Max – 5 times;
- Samsung S8/S9/S9+/S10/Note10 - 4 times;
- Xiaomi Mi 9, Huawei P30 Pro - 4 times.
Characteristics
- Capacity: 20,000 mAh/3.7 V;
- Effective capacity: 13,000 mAh;
- Charging time: 12 hours;
- Type-C input: QC3.0, Huawei FCP, Samsung AFC and Power Delivery 5V/3A, 9V/2A (max 18 W);
- Type-C output: QC3.0, Huawei FCP, Samsung AFC and Power Delivery 5V/2A, 9V/2A, 12V/1.5A (max 18 W);
- USB QC3.0 output: QC3.0, Huawei FCP, Samsung AFC, but does not support Power Delivery fast charging (for PD, use Type-C output) 5V/3A, 9V/2A (max 18W);
- USB output 5V/2A: for charging devices in normal 5V mode;
- Dimensions: 163 × 76 × 24 mm;
- Weight: 445 g.
Price: 4990 rubles.
Please note that the model is not on the site yet, it will be added later. Sales start from October 1, 2022.
Buy!
Battery INTERSTEP PB12Qi
For a battery with an impressive capacity of 12,000 mAh, the battery is not very large; the accessory weighs 260 g. It has a plastic body and eco-leather trim: it looks nice and feels pleasant in the hand. In addition, it also does not scratch the phone while you are charging it.
From questions of aesthetics we move on to technical details. Let me start with the fact that the battery is easy to charge; it has two inputs: one Lightning, the other USB Type-C. The Type-C connector supports fast charging Power Delivery, Samsung AFC, Quick Charge 3.0 for both input and output. In other words, the battery itself can be quickly charged, and it will quickly charge compatible devices.
The difference in speed between normal and high-speed mode is noticeable: the battery is fully charged not in 12, but in just 5 hours. Thanks to Power Delivery support, you can charge your iPhone 8, XR, XS (and most likely the new iPhone XI) using a USB Type-C to Lightning cable. Please note: the cable must be MFi certified, then we get a full 18 W through the cable.
The battery also received USB-A with support for fast charging Qualcomm Quick Charge 3.0, you can connect any suitable cable here, the second USB-A produces the usual 5 V.
Fast wireless charging according to the Qi standard also works; it will come to the rescue if suddenly there is a wire left at home, and your beloved iPhone XS is dying before your eyes. Qi charging supports power of 5 W, 7.5 W (for iPhone) and 10 W (Samsung S-series and Note smartphones).
Important feature: The Power Bank supports “pass-through charging”, i.e. it charges the smartphone while it is charging itself. You can immediately use wireless and wired charging simultaneously. This means charging your smartphone and TWS headphones.
The downside is that there is no support for charging smart watches; they require separate wireless charging.
How many times will it charge
- iPhone 6/7/8 - 4 times;
- iPhone 8 Plus/X/XR/XS Max – 2.5 times;
- Samsung S8/S9/S8+/S9+/S10, Note10 - 2 times;
- Xiaomi Mi 9 - 2 times.
Characteristics
- Capacity: 12,000 mAh/3.7 V;
- Effective capacity: 7800 mAh;
- Charging time: from 12 to 5 hours;
- Dimensions: 159 × 74 × 19 mm;
- Weight: 260 g.
Price: 3990 rubles.
Buy!
There are already thousands of watch apps
Watch owners can already do a ton of things with the device on their wrist: unlock a Starwood hotel room door, read New York Times headlines, shop, navigate the street, check in with Foursquare, stay updated on Expedia reservations, and much, much more.
And if that's not enough, the IFTTT service
has just released watch versions of the Do Button and Do Note apps, giving its users access to 170 other apps. According to an IFTTT spokesperson, “People can easily launch their favorite ‘recipe’ with a tap on their wrist.”
It's not entirely clear which of these apps are actually useful or what exactly people want to do with their wrists, but the developers' desire to give us choice is welcome.
