Gadgets from the famous company Apple are the dream of many people. Their wide capabilities, innovative design, and high technology win the hearts of domestic buyers. As you know, Apple devices are distinguished by a high level of reliability and a long service life. However, unexpected problems may also occur, for example, the iPad will not charge. Of course, such a breakdown makes the owner nervous.
Having connected the power adapter to the device and seeing a message on the screen stating that charging is not happening, you immediately begin to panic. But professionals do not recommend running to a service center. First you need to find out the reason why such a failure occurs in the system. To do this, it is advisable to test not only the charger itself, but also the iPad. Correct diagnosis is a guarantee of stability.
This article will discuss the most common reasons when you cannot charge an Apple device. We will also offer several ways to solve this problem.
iPad won't charge - what to do?
All gadget owners know which icon is displayed during charging. There is a battery icon on the main screen. When you connect a charger to your iPad, lightning appears. If one day this does not happen, then you need to look for the reason.
Studying reviews from both ordinary users and professional craftsmen, we can conclude that the most common problems are problems with the adapter, wires or socket. Also, do not rule out the possibility of a plugged connector. Sometimes charging problems can occur due to mechanical damage or moisture penetration into the device. And finally, the most serious failure cannot be ruled out - failure of the power controller.
So, let's look at each reason in more detail.
Why does my iPhone only charge when it's turned off?
Over the past decade, mobile phones (smartphones) have penetrated into all spheres of human activity. Many people simply cannot imagine leaving home without a faithful assistant in their pocket.
A modern smartphone is a multifunctional tool that allows you not only to make calls, but also to fully surf the Internet, engage in remote work, and also make non-cash payments using the device itself instead of a bank plastic card.
Increasing the functionality of electronic devices entails increased battery consumption. And it is with this block that phone owners most often have problems.
We are looking for the reason in the wire
If the iPad does not charge, then the owner’s first action should be to check the charger, or rather the cable. It is necessary to inspect it for damage. This must be done carefully, since insulation damage can be microscopic. It is also recommended to check the contacts in order to eliminate the presence of problem areas.
Another important point is the cable brand. All Apple devices recognize only original accessories. If they are not MFI certified, the system will automatically block the iPad.
In order to eliminate this reason, you need to check the cable by connecting it to another device. If it does not charge, then you need to replace the wire with a new one. But if a message appears on the iPad screen stating that this accessory is not supported, then most likely the cable is simply a fake. It is recommended that before purchasing, make sure that the packaging contains the inscription: Made for iPod, iPad, iPhone. This label is used if the product is manufactured by another company that is an official Apple partner.
Restoring via iTunes can fix iPad charging problem
While it doesn't happen very often, there may be software glitches in an update released by Apple that has affected your iPad's charging capabilities. To make sure this is not the case, try restoring your backup. Be sure to use a backup from a date when the iPad was charging without issue, otherwise the software glitch will still be present after restoring your backup.
As I mentioned above, this problem can be caused by more than just a software update. So, first back up your device and then install it again in iTunes.
If you haven't made backups yet, restore your iPad in iTunes. Attach iTunes instead of iCloud for recovery. This happens mainly because iTunes deletes, reinstalls and reloads all your information.
- Connect iPad to iTunes
- Go to the "Device" tab in the upper left corner of the screen.
- Click Backup.
- Wait for the backup to complete.
- Click "Restore".
- Wait for the recovery to complete.
Once your iPad is fully restored, try to see if it starts charging again. Your battery may need replacing.
Checking the functionality of the socket and adapter
If everything is fine with the cable, but the iPad does not charge, then you need to continue searching for the reasons causing the breakdown. Sometimes it can be so banal that sometimes it becomes very funny. The fact is that in their reviews, users often describe situations where they used a non-working outlet to charge a gadget. In order to eliminate this, it is necessary to connect another device through it that is in working order.
The situation is a little more difficult with the adapter. If possible, you should try it on a smartphone or other tablet. You can also disassemble the adapter in order to visually check the condition of the contacts.
Check your device's Lightning connector
If you have the problem covered in the previous section and you were not able to solve it using the above-mentioned recommendations, this point that we will discuss now may also come in handy for you. The Lightning connectors that these 2022 iPads include, like other Apple tablets, are ready for daily cable connections without any hassle. However, there are certain factors that can cause it to stop working or not always work correctly.
Clean but neat
Dirt, like moisture, is the main enemy of many electronic components, such as the iPad connector. We use the device in all situations, carry it in backpacks, leave it in drawers... All of this can eventually lead to the formation of small spots of dust or other dirt residues such as breadcrumbs and the like if we eat near the device.
The most recommended way to clean the Lightning connector is to use a lint-free swab and/or a soft-bristled brush . You'll be wondering what these items are, and we have to tell you that you probably already have one of these sticks or brushes at home, and you regularly use them for personal hygiene. You will need to very carefully insert them into the connector socket and push them in carefully to remove any accumulated dirt. If your iPad's charging problem has been like this, you will see that it will be resolved once you complete this process and connect the cable.
Was the fluid tense?
We previously mentioned liquid damage as the enemy of electronics, and we'll highlight that here. Liquid may have been spilled near your iPad or left on a wet surface. If you remember a similar situation, we cannot tell you that this is one hundred percent the cause of the problems, but there is a high probability that it is.
There are also times when moisture can enter the iPad through this connector without the need for any spillage nearby. This is why it is always recommended to use and store these devices in the driest conditions or with low humidity levels. These damages cannot be easily repaired, and although there are some tips such as pouring the device into a bucket of rice, the truth is that this is more of a legend than a certainty about its effectiveness.
If your iPad 2022 has been damaged by liquid, you will have to contact technical support. All this regardless of whether the damage is caused only by a failure of the load or some other component. Apple and its Authorized Technicians (SATs) do not change the connector itself, so they will offer you a replacement device with confidence that it is working correctly.
The controller has failed
One of the serious breakdowns when the iPad stops charging may be a breakdown of the power controller. Most often, this problem occurs with tablets that are connected to an uncertified cable.
Unfortunately, this repair will cost the owner a lot. We can say that he will be very lucky if the gadget is still under warranty.
Damage to the tablet
There are many different situations when the iPad does not charge. Reviews that are presented on the Internet often describe situations in which the tablet received mechanical damage. This happens quite often. Many users have encountered this problem. In this situation, there can be only one solution - go to the service center.
Also, problems with charging the iPad can occur if moisture gets inside the case. The contacts begin to oxidize, which leads to breakdowns. In such a situation, you need to be on guard, as moisture can cause a malfunction that will completely disable the device. Just as in the first case, owners will have to seek help from qualified craftsmen.
Problem with the software part of the mobile device
Sometimes the behavior of the iPhone described above when charging is possible due to incorrect functioning of the software part of the smartphone. For example, the power consumption of running applications exceeds the charging current provided by the power adapter. If this situation arises, you need to clear the device’s memory as much as possible from unnecessary applications and then test the device for charging again.
Additional solutions to the problem:
Reset your smartphone to factory settings.
Each smartphone can be returned to its original condition at the time of purchase. This removes all accumulated software garbage. It is important to remember that before performing a reset, you must copy all important data from your smartphone to your personal computer to avoid losing it.
If the measures taken do not produce results, then, most likely, the malfunction lies in the device itself and you cannot do without contacting an authorized service center.
Charging from a computer
On the Internet, users often raise the issue that the iPad is slowly charging from the computer. This problem does not arise due to a breakdown, but due to technical characteristics. The fact is that a tablet, unlike a smartphone, requires much more energy. When the screen is on, charging will remain in place.
If the owner is interested in the time period during which the battery restores its resource to 100%, then it is recommended to abandon this method by switching the device to a power outlet. Otherwise, you can leave the tablet connected via a USB cable, but do not forget to turn off the screen. This method of charging the battery will take a very long time.
iPad shows it's charging but won't charge
After keeping the gadget connected to the mains all night, users may find in the morning that it simply has not charged. In such a situation, the cause must be sought in the battery. As a rule, you will need to connect the gadget to power again in order to make sure whether the charging icon appears or not. If everything is displayed in standard form, then you need to wait about one hour. After this, check whether the charge value has changed. If this does not happen, then you need to go to the service center. It will carry out diagnostics and determine exactly what the problem is: in the battery or the electronic part of the gadget.
Battery malfunction
The second reason why the iPhone only charges when it is turned off may be a battery malfunction. The battery often stops working properly due to normal physical wear and tear. In such a situation, you should do the following:
- Turn off iPhone.
- Connect the gadget to a known-good original power adapter connected to the electrical network.
- Leave everything like this for at least twelve hours.
If this procedure does not solve the problem, the electronic circuit of the power controller may have failed and you will have to take the device to a service center to restore functionality.
The connector is clogged. Advice from professionals
So, having figured out the reasons why the iPad is not charging, you need to try to fix the problem. The first thing that can help in this matter is cleaning the charger connector. Professionals advise using a regular toothpick for this. All actions must be very careful, since it is quite easy to damage the contacts. However, if this does not help, and you have already tried all other methods, then you will have to go to a service center for qualified help.
There are many factors that can cause an iPad not to charge. Most often, equipment refuses to charge from a third-party charger, from a computer (desktop or laptop) from another company. The problem may also lie elsewhere:
- mechanical damage to the iPad or connection connector
- moisture entering the case and other factors associated with improper operation of the device
Some malfunctions that cause devices to charge poorly can be resolved on your own. Elimination of complex breakdowns should be entrusted to specialists. But before you take the device to a service center, try to solve the problem using simple instructions.
What to do if there is no battery charge
Initially you need to perform the simplest manipulations:
- pull out and insert the cord several times;
- Leave a completely discharged iPhone on charge for half an hour;
- connect to another outlet or to a computer.
If this does not help, it may be a cable issue - you need to connect the phone to another Apple charger. It is worth checking the condition of the cable used and its integrity. The battery could also suffer from prolonged use; in this case, it will have to be replaced.
Checking the charger
If the problem is caused by a charging fault, you need to take another cable and connect it to the disconnected iPhone. If the process has started, then you need to turn it on - the phone should continue to charge. If this happens, it means the fault was a faulty cord.
If the smartphone does not start charging, you need to look for a fault in it itself - the charger has nothing to do with it. A common reason for this behavior of the phone is an error in the charge controller. This should be dealt with by an Apple service employee, where the phone should be taken.
If you don’t find another charger to check, you can do the opposite: connect your cable to another iPhone. Charging has started - this means that the cord is suitable for use, and the breakdown must be looked for in the smartphone.
When buying new iPhone accessories - a battery or a cable - you only need original ones. Generic accessories may damage the equipment, and the warranty will be void due to the use of inappropriate equipment.
Close and delete applications
If the previous steps did not work, then you need to remove the applications from the phone’s memory. When too much of it accumulates, electricity consumption exceeds supply. As a result, normal charge recovery is disrupted.
In off mode, programs are not active, so power consumption is not hampered. You need to clear the space of unnecessary programs - these could be old software that has not been used for a long time. Reboot the system. After this, charging can work when the phone is turned on.
Reset iPhone to factory settings and update it
This is not the most effective measure, but sometimes it works - the iPhone starts charging again when turned on. For this:
- It is important to properly prepare the device. It must have the latest iTunes installed and Find My iPhone turned off in iCloud settings.
- Launch iTunes on your computer.
- Connect your phone via USB.
- You will be prompted for a password - follow the instructions.
- When your iPhone appears in iTunes, you need to select it.
- In the “Review” section, click the “Restore” button. Confirm the action by pressing again.
What are the most common charging problems?
Situations in which the iPad does not charge manifest themselves through different symptoms. So, the iPad may suddenly stop charging completely or only in some cases. You may encounter these options:
- The device does not charge from the outlet
- the device writes: “No charging from the network” or does not show charging
- equipment does not charge via USB
- The iPad does not charge more than 1 percent (various options are possible - more than 2 percent, etc.)
- The charging icon is on, but there is no power
- The iPad won't turn on and won't charge when turned off.
- The device does not see the charger
- Charging speed has decreased significantly
Uncertified cable
The parameters of the cable needed to charge the iPad are carefully controlled by the operating system. The tablet may refuse to work with a particular product. In this case, the device issues a warning and says “no charging”. A simple way out of this situation is to buy a certified cable. If this is not possible, you should try removing it from the slot and reinserting it.
It is recommended to update the control system. In the latest models of its tablets, Apple took into account that the owner can use an inexpensive wire that does not meet strict parameters. You need to go to Settings -> General -> Software Update. As a result of this action, the tablet may no longer display an uncertified hardware error.
Main causes of problems
iPad charging problems can occur due to a variety of factors. Malfunctions are caused by falls, impacts, illiterate flashing and other violations of the rules for using the gadget:
- connecting a charger from another company (error notifications will appear on the screen)
- connecting the charger to a bad outlet
- connecting the tablet to a computer or laptop of another brand or an outdated model of gadget
- damage to the power controller or charger connector
- failure of the battery, lower cable
- moisture getting into the gadget body, USB port or battery
In addition, situations arise in which the iPad is fully charged only when it is turned on - this also indicates a problem. The choice of methods for eliminating it and the duration of restoration depend on what kind of breakdown occurred in the gadget.
What problems can you handle on your own?
If the iPad does not function properly only in some situations or even does not charge at all, you can try to solve the problem yourself. To do this, follow these steps:
- reboot your device
- check the current battery charge level
- connect the original charger, check its functionality (replace it if necessary)
- check if there are any kinks in the power cord somewhere
- clean the connection connector from dirt and dust
- try to charge the iPad from different sources: from the network (socket), via USB, from a Power bank
All of these actions can lead to the tablet starting to work smoothly again. However, if after the measures you have taken the gadget still does not work well (does not see the charger, does not turn on correctly), most likely the cause is mechanical damage.
You should not try to fix such problems yourself - this can lead to damage to working parts of the gadget. Repairing the iPad in this case will be even longer and more expensive. To avoid wasting time and money, contact qualified professionals.
Who can you trust to repair your gadget?
If the battery stops receiving power and you cannot fix the problem yourself, you should send the gadget for professional repair. To avoid standing in line at the service center, waiting a long time for repairs and overpaying for services and spare parts, choose a professional contractor on the Yudu website.
Yudu's craftsmen will handle the repair no worse than an Apple service center. All specialists underwent personal data verification when registering on the site. Each of them has extensive experience and positive customer reviews in their personal profiles. Yudu performers will provide a number of advantages:
- no queues when ordering
- short recovery time for the device
- professional repairs using modern tools and original spare parts
- low prices for services due to the absence of intermediaries and great competition in the service
- completing a task at any time convenient for you
- convenient payment methods (cash, non-cash payment; installments are possible)
When choosing specialists, pay attention to their work experience and rating in the system - this will help you hire the most suitable performer.
What actions do Yudu masters perform?
Specialists registered with Yuda quickly restore iPads that are not charging. An experienced technician will carry out qualified iPad repairs at a low cost.
First of all, the specialist will conduct a full diagnostic of the gadget, tablet battery, charger and other components to find out where the problem occurs. The wizard will then perform the following steps:
- disassembling the device
- inspection of parts
- replacement of failed components
- cleaning gadget parts from dirt and dust
- high-quality and neat assembly of the model
- final check of the device's functionality
Having completed all repair work, the YouDo performer will give recommendations for the safe operation of the gadget, which will help extend the life of the device and avoid repeated repairs in the near future. The wizard will also tell you about simple ways to troubleshoot minor problems.
Leave a request on this page or through the mobile application, describing your situation (for example: “iPad is not charging”) - specialists who are ready to take on your task in the shortest possible time will write to you.
Checking the charger
Is your iPad not charging? It is possible that the problem is with the charger. We need to check its performance using another memory - we can take it from friends and acquaintances. After connecting the charger to the gadget, you should make sure there is a charge.
If charging has started, feel free to go to the store and buy a new charger (preferably original, to avoid problems with low-quality accessories). There is nowhere to get another charger, but you have another Apple gadget at hand? We connect the suspected charger to the gadget and check again for the presence of charge.
If the gadget does not charge, then the problem is a faulty charger. Since almost no one repairs them, it’s easier to visit the nearest mobile phone store or Apple store to purchase a new charger there. Lack of charge may be due to the use of low-quality non-original accessories .
The developers guarantee a normal charge only with original chargers. In addition, the creators of non-original chargers could have made a mistake with the parameters, which is why the charge current is insufficient. There will be no such problems when using Apple memory.
Do not forget to check the charger cable - it is quite possible that the whole problem lies only in it, and you will only have to replace it.
Correct connection to power supply
You should immediately take an adapter for charging; the ideal option is the USB cable included in the kit. When using a charger from another manufacturer, you must make sure that it is certified by Apple. Followed by:
- Connect the Lightning-USB cable to your iPad (or other Apple device). Connection is possible using a cable with a 30-pin connector;
- Next, connect to the power source, it is recommended to select one of the options:
- A regular socket, you must first connect a special device to the adapter for charging through the socket, and then connect it to it;
- You can charge your iPad using a USB connection to a desktop PC or laptop; it must be in an active state. You can use USB 2.0, 3.0 or 3.1. If there are ports on the keyboard, it is better not to use them, as the circuit loses reliability, creates an extra load on the keyboard and a lower charging speed;
- It is possible to use special docking stations, portable charging accessories or a Power Bank. They must be certified by Apple.
iPad won't charge on computer
Have you connected your tablet to your computer to recharge the battery? Then you may encounter the problem of charging current mismatch. As a result, the iPad does not charge - what to do? The problem can be solved in two ways:
- Try connecting the tablet to another computer;
- Change USB port;
- Use a USB hub with external power.
It is possible that your computer's USB ports are not capable of providing enough current to charge your tablet's battery . In this case, you need to test the functionality of the tablet on another computer - connect and check for charge. If it is not there, then the problem is with the iPad itself.
If charging has started, this means that the USB ports on your computer are not able to provide sufficient charging current. In some cases, the problem is solved by reconnecting the gadget to another USB port - sometimes they fail, making normal charging impossible.
If you use a USB hub, we recommend connecting it to an electrical outlet to increase the charging current.
Forced restart
In some cases, iOS may freeze in such a way that it refuses to accept any external influences. To restore functionality, there is a special, forced restart of the iPad. After completing the procedure, the tablet will return to life and will be able to accept a charge if there is no mechanical damage to the components of the electrical circuit.
You can restart if you hold down the wake-up button and at the same time press the volume rocker down. In older models, it is possible to use the lock and “Home” buttons. Must be held for 10 seconds. before the Apple logo appeared.
In some cases, you will have to update your device or roll it back. The most convenient way to restore an iPad is using iTunes on a PC, but to get a high-quality result, it is necessary that the devices first synchronize and remember each other. You may immediately see a notification asking you to restore the tablet, or you will have to go to its menu and select the appropriate item.
Almost always, if the cause is not serious internal problems, the user manages to restore the device’s charge to normal or determine the culprit of the failure.
iPad won't turn on or charge
If your iPad does not turn on or charge, then the problem lies in the gadget itself - you need to take it to a repair shop. But before that, be sure to check the functionality of the charger. If no independent tricks help, feel free to go to the nearest service center - here specialists will examine the gadget and give their verdict.
It is possible that the problem lies in the battery that requires replacement. In some cases, the lack of charge is due to a broken system board .
A more typical solution, although perhaps not efficient
In the technology sector, it is very easy to say that specialist professionals always solve problems by turning the device on and off . Obviously this is not true, but no matter how funny and even absurd it may seem, it often produces positive results. This is because sometimes certain issues can occur in the background that generate faults and the load issue can be one of them.
We sincerely believe that with this action there is little chance that your problem will be solved, but it takes little time and you have nothing to lose by trying. All this is taking into account that your device still has a battery, because if it's already dead and turned off, it won't be able to perform.
iPad shows charging but won't charge
Have you set your gadget to charge, but after some time you find that the battery is low again? Why won't my iPad charge? In some cases, the lack of a normal charge is due to damage to the battery - it needs to be replaced by contacting a service center.
There may also be problems with the charger - try using a known working charger. In the most difficult cases, such strange behavior of the gadget is associated with a breakdown of its electronic part.
