How to avoid problems with gadget power supply in the future
In order to avoid problems with charging and turning on the gadget in the future, you must strictly adhere to certain rules. The most important of them can be identified:
- always charge the gadget fully;
- do not frequently charge devices for short periods of time;
- Always use original adapters and power cables;
- replace the battery only at a service center to avoid purchasing a counterfeit battery;
- repair the USB cable or mini-adapter at a service center;
- check the connectors for connecting the cable and charger for debris and mechanical defects;
- If the power controller fails, take the phone to a service center to receive a warranty on the installed element.
The phone should be charged to 100% battery capacity, without interrupting the process at intermediate stages
If you follow these recommendations, the gadget is guaranteed a long period of operation and uninterrupted operation.
If your iPhone is dead and won’t charge, what should you do?
Based on these factors, we will consider effective solutions.
- When the battery is completely empty , connect the original “charger” to the iPhone, connect it to the mains and wait about fifteen minutes. The screen will be black at first, but later an icon should appear indicating the process has begun:
Suddenly Afyon 6 does not start even after half an hour, but a “hint” appears on the display - they say you need to connect it to an outlet, then perform the required operation and wait at least four hours until the resource is restored to 100%:
Useful recommendation from IT Technician: it is not advisable to completely discharge modern batteries (to zero) or recharge (for example, leave them overnight). Ideally, stick to 20-80%. This way you will extend the life of the battery.
- If there is a software failure (the methods listed above are powerless), then you will have to resort to a “hard reset”. Hard Reset is simple, but after it all installed applications and data are deleted, that is, you get an iPhone with clean firmware.
You need to press and hold two buttons on the case – Home and Power. If you have a new iPhone that does not have a Home control, then press Volume+ instead:
Do not release until the “bull’s eye” appears on the display. This usually happens within about twenty seconds. The first startup after the reset will take longer than usual, you will have to wait. And then immediately put it on charge, after which you can restore information from iCloud.
Causes of malfunction
The reliability of the iPhone has been proven over the years. The manufacturer cares about the quality of its gadgets, so manufacturing defects are practically excluded, but they are allowed. Many malfunctions arise due to careless handling of the smartphone, or smartphones from the first batches. Software failures also appear due to independent attempts to reconfigure the phone by resetting the factory settings.
Among the most common reasons why an iPhone stops turning on are:
- deformation of the nest or contamination on its surface;
- Broken electrical outlet or non-working USB cable;
- Broken loop contacts;
- Using a cheap Chinese charging accessory;
- Firmware glitch;
- Problems with the internal components of the iPhone: battery, power controller, motherboard.
Note! If there are problems with the power controller or battery, you will need to completely disassemble the phone. Do not try to do it yourself - you may damage the main contacts, which will lead to complete failure of the device.
The fifth iPhone lasted for six months. Now it won't turn on even after charging. Why?
Most likely, your iPhone battery is deeply discharged.
To restore battery functionality, it is necessary to directly supply current to the battery.
You can’t do it without outside help (a service center or a good friend who knows a lot about this).
Why does my iPhone get hot?
Often, iPhones overheat if the device transmits a Wi-Fi signal rather than receives it, several resource-intensive applications are running, or the iPhone was simply in a deep discharge and to get it out you need an increased current supply, which leads to heating
1 6 · Good answer
The iPhone began to discharge faster under the same load as before, the phone is not even six months old, the charger is original. What is the reason?
Check if some applications are using geolocation or updating data in the background. About three years ago, turning off social media notifications helped me a lot on my old 4s. VK and FB are silent - charging goes slower and you are not distracted by any nonsense. I also recommend running a battery diagnostic test. There is a special program coconutBattery (free), connect your phone and it shows how worn out the battery is.
The apple is blinking on the iPhone 5S smartphone. What to do? I tried rebooting - it didn't help.
Most likely there are 2 options: either your battery is faulty and you should start by replacing it, as this is the cheapest and first option, or all other options are pointless to repair, as a high-quality repair will cost more than the phone.
Why is the charge on the phone 20%, and a minute later it’s already 1%?
1) The battery is faulty – 10% probability
2) Software malfunction – 5% probability
3) Main board failure 85%
This happens mainly due to: water getting in, falling, charging the device with a faulty charger or cable.
I work at the service center https://54da.ru, contact us for repairs
Why don't you buy an iPhone?
Firstly, because the iPhone is expensive. I'm not ready to spend more than ten thousand rubles on a phone. Honestly, I feel bad. Yes, I don’t need a dialer, but the list of functions I need fits within the agreed amount. With a more expensive phone, I simply won’t be comfortable: I’ll blow dust off it and be afraid of losing it or breaking it.
Secondly, because an iPhone is not so convenient. Phones on the Android platform make me happy with a huge number of free applications and the absence of attempts to control whether I am listening to pirated music, for example.
Thirdly, because during my conversations with IPhone owners, I did not see any enchanting advantages in it that would convince me that I couldn’t live without such a phone.
And, finally, because I already have a phone - an old Sony Ericsson Xperia Mini Pro with a charming Qwerty keyboard. It was bought 4 years ago, by the way, it was my first smartphone and is still alive. Yes, some applications do not run on it (for example, Uber or Yandex.Transport), but you can live without it. And I don’t want to be left without a comfortable keyboard that allows me to type touch-sensitively, a durable case that survived a flight from a platform to subway rails, and a compact size (the length of a palm). And a nice bonus: most of my new acquaintances are touched and surprised when they see my phone, and this helps keep the conversation going. We still need to look for such a durable mobile phone, and iPhones, judging by the experience of others, are short-lived.
Source
The display is on, but does not respond to touches
In some cases, the matrix can properly produce an image, but the sensor stops perceiving the user’s touch. Sometimes a banal restart helps - how to do it is described above.
A similar problem usually occurs when installing non-original components. “Chinese” versions of cables and display controllers have a much shorter service life than original components. The glass remains intact, but the touchscreen ceases to perform its main functions.
How to turn on iPhone 10
The Home button has disappeared from the iPhone 10. The manufacturer introduced a full touch screen. Let's look at how to correctly enable a new model.
Standard method
The main power button still remains in place. You can turn on iPhone 10 by simply holding it down for 3-4 seconds. Once the logo appears, you can release it. If the image of a low battery appears, the device is charged.
Important!
The charging connection method also works.
If you don't want to turn on
When your smartphone freezes, press the volume up button, then press the volume down button. Then hold down the power key. The phone will reboot and at the same time reset the operating system settings.
How to turn on iPhone 11
The iPhone 11 is worth the money. It has undergone a lot of modernization, but still turns on using the power button.
Standard method
The power key of the smartphone is located on the side. To turn on iPhone 11, you need to hold down the power for 3-4 seconds. When the logo appears on the display, the button can be released.
Reboot
If the power button freezes or does not respond, the smartphone turns on in another way.
Press and release the volume up button, repeat with the volume down button. Hold down “Power” for 5-10 seconds. After the logo appears, standard loading begins.
The operating system is rebooting. It is often prohibited to use this method; it leads to malfunctions.
How to turn on iPhone 7
IPhone 7 is considered one of the most stable models. It is not outdated yet and is in great demand.
Standard activation
To turn on the iPhone 7, you need to hold down the “Power” key, which is also located on the right side, for 3-5 seconds. If the Apple logo appears, everything is fine. If the battery indicator is red, you need to connect it to the network.
Important!
With the 7th model, emergency activation using the “Power” and “Home” keys or activation using charging also works.
Updating iOS via iTunes
Sometimes the smartphone turns on, the apple appears, but it immediately freezes and does not want to boot. The problem lies in the operating system failure. You can solve the issue by updating iOS.
Step-by-step instruction:
- You need to connect your smartphone to your computer via a wire.
- Then go to the “About device” section. Create a backup.
- Download the update file from the official website.
- Click on the phone icon and find the “Update” button.
- Select the downloaded file. Open it.
- Click "Update" again.
- The automatic installation of the update will begin.
Important!
Without backup, all data from your smartphone will be lost.
If "the patient is more dead than alive"
“Resuscitation” actions have been carried out, but the smartphone still shows no signs of life, which means we are figuring out what else caused the problem:
- Worn battery.
- Damaged cable.
- Broken connector for connecting the “charger”.
- A glitch appeared during the update.
Here, users will have to turn to specialists for help, since if they try to “open” the phone case on their own, they will not be able to get repairs under warranty.
Only tech-savvy owners of Apple devices can figure it out on their own.
Another interesting article for you: How to check battery wear on an iPhone using apps and iOS
Broken power adapter
The screen may not turn on if the phone is completely discharged. If, when connected to a power outlet, the Apple logo does not appear and the backlight does not light up, the fault lies in the charger.
Low-quality Chinese “chargers”, as a rule, cost less, but fail at the most inopportune moment.
You should also check the lighning connector; often dust and dirt get clogged there, as a result the contact is lost and the battery does not charge.
How to turn on a locked iPhone
In the settings of any iPhone, you can enable password protection, fingerprint or Face ID. If you enter the password incorrectly several times, your iPhone will be locked. The blocking time depends on the number of attempts; the more there are, the longer it remains in the blocked state. When rebooting, the user receives a non-working “brick”.
This situation does not always mean that the phone was stolen. Perhaps the password was forgotten or children played with it.
Turning on a locked iPhone is not a problem, you can do it in 3 ways:
- standard method via the power button;
- in an emergency way via the volume keys and power hold;
- by connecting a discharged smartphone to the network.
But how to turn on a locked phone so that you can access it? Let's look at it below.
How to turn on a locked iPhone via iTunes
Step-by-step instructions to enable a locked iPhone via iTunes:
- Connect your smartphone to your computer via USB.
- Enable iTunes.
- Create a backup copy of your iPhone.
- Find the "Restore iPhone" button.
- Restore the memory of an old phone from a copy.
- A new password will be requested during standard boot.
Via iCloud
Step-by-step instruction:
- Go to the iCloud website.
- Log in.
- Click “Find iPhone” and select the desired device.
- Find the “Erase iPhone” button (there must be a backup copy). The phone will begin to recover.
- After installing the backup, the operating system will ask for a new password.
First actions
The display stops working as a result of mechanical damage or software failure. If the screen on your iPhone 5 goes dark, but the phone continues to work (responds to the volume and lock buttons), try restarting the device. Perhaps the device is simply frozen and a restart will solve the problem.
If rebooting does not help, the problem may be caused by non-original device components. Chinese modules work much less than the original ones and unexpectedly fail.
Chinese fake iPhones are also less reliable than original smartphones from Apple factories. Buying a used phone from dubious sellers may result in the gadget failing, regardless of the model.
Checking the battery
When an Apple gadget is charging but does not want to start, the battery may be the cause of this strangeness. The iPhone has a peculiarity: this battery cannot be removed and analyzed. In this case, you need to charge it for the whole night and try to turn it on in the morning.
This is a common action with batteries that are very discharged. After standing on charge for half a day, the battery sometimes replenishes its charge and gains the required amount of electricity. If the battery could be removed, then it would be worth trying to shake it up using a power supply or a “frog”. But, since our battery is not removable, we will have to wait. If the battery of your iPhone turns out to be removable, then the iPhone is not real.
