How to make your AirPods sound louder (12 solutions)

Turn off headphone security on your iPhone.

1. Open the Settings app and tap Sounds & Haptics.
2. Tap Headphone Security.
3. Turn off the notification switch on your headphones.
4. Then turn off the Volume Down switch.

Caution: I would advise you to exercise caution before configuring the above setting. You need to listen to music at a decent level. Prolonged use of any headphones at high volume is dangerous. So instead, use the slider to adjust the decibel level (step 4).

Remote control

AirPods headphones support the function of interacting with the Siri voice assistant. To change the intensity of the sound, the user just needs to call an assistant and give him the corresponding command by voice: “Make it louder” or an opposite command.

Activating Siri on first-generation models is done by double tapping on the earbud body. Subsequent versions of the “ears” have improved the activation mechanism. Added an option to call the assistant with the phrase “Hey Siri”.

On the street, in public places and in transport, changing the sound volume by voice is inconvenient. Reducing or increasing the volume of music is quite simple using a paired gadget:

1. Use the button on the side panel of the iPhone, marked on both sides with “+” and “-” signs. Pressing “+” will increase the sound level, and pressing “-” will decrease its intensity.
2. Using the Digital Crown on your Apple watch. Turning it up will add intensity to the sound on the headphones, and turning it down will decrease it.

Interesting. The owner of a smartwatch paired with earbuds can remotely increase or decrease the volume in the earbuds and switch tracks from the gadget screen.

Calibrate your AirPods.

One of the reasons why your AirPods have low volume is that your AirPods and iPhone may not be on the same page. For example, they may have a different meaning for "full volume", which may cause the AirPods to not use full volume. Here's how you can calibrate your AirPods.

1. Make sure your AirPods are connected to your iPhone and in your ears. Now set the volume to zero. Use the Control Center for this.
2. Then turn off your AirPods. To do this, open the Settings app → Bluetooth → tap (i) next to your connected AirPods → Disconnect. Even after disconnecting, keep your AirPods in your ears. Also, go back to the main Settings screen and turn off Bluetooth.
3. Now play music through your iPhone speakers. Use Control Center again to turn the volume down to zero.
4. Finally, turn on Bluetooth and re-pair your AirPods. Now you can adjust the AirPods volume as you wish.

Automatic playback: setting

The initial setup is performed completely automatically:

1. Take the AirPods case, open the lid and remove the headphones.
2. Bring your iPhone to your headphones.
3. When an invitation appears on your smartphone, click on the connect button.

4. After the connection is established (a couple of moments), the Apple Air Pods headphones are completely ready for use.

By default, the operating mode is set to automatic. Using a built-in sensor, the headphones monitor whether they are inserted into the ear - if so, sounds begin to play through them. To pause playback, you need to remove one earphone, and if you take out both, the playback will be stopped. But there is no such automation for controlling the volume of AirPods.

How to make different volumes on headphones?

In most cases, it is impossible to make different volumes on the right and left headphones that are connected to the same phone. The only exceptions can be models that have a proprietary application that balances the sound on different sides. If wireless headphones are connected to a laptop, then you can set different volumes. To do this, you need to go to Windows settings for sound devices through the menu “Control Panel - Hardware and Sound”.

Here we select our headphones and go to “Device Properties”. In the “Levels” tab there will be a “Balance” section with speaker adjustments, where you can shift the volume towards the right or left ear.

Can I connect other watches to my iPhone?

In order to connect a smart watch to an iPhone, you just need to install the program; downloading any additional updates is not required. You can download the Android Wear app from the App Store for free. To do this, you must have an iPhone 5, 5c, 5s, 6 or 6 Plus running iOS 8.2 or higher.

Interesting materials:

What to do if the computer turns off by itself? What should I do if my computer turns off while playing? What to do if your computer freezes during the update? What to do if the computer freezes when rebooting? What to do if the Internet on your computer is slow? What to do if your computer screen is flickering? What to do if a powerful computer slows down? What to do if the mouse does not move on the computer? What to do if your computer has a black screen? What to do if the screen on your computer gets smaller?

For PC

Causes of the problem

All Bluetooth headphones are equipped with a built-in microphone - it is used as a headset. When a device is connected to a computer, the OS defines two operating modes:

1. Headphones only (Stereo).
2. Headset (Headphone).

For example, in Windows 10, next to the gadget icon, “connected voice, music” will be displayed. This means that the headphones are activated as a headset. A similar problem occurs with expensive wireless speakers that have a built-in microphone for accessing the voice assistant. Reason for bad sound:

• When headphones operate in headset mode, the playback quality drops. The system simultaneously uses speakers and a microphone. In this mode, the user can talk on Skype, call via instant messengers, etc.;
• If the headphones operate only in “Stereo”, the system reproduces higher quality sound. This is due to the way Bluetooth profiles work.

Another reason is incorrect equalizer settings. To improve sound quality, just change the equalizer settings on your PC to ones that are more suitable for pairing devices.

How to increase the volume on touch headphones?

The principle of working with sound on touch headphones is no different from headsets that have a physical control button. Therefore, everything said above can be safely attributed to TWS touch models. If they have support for volume control, then you need to look in the instructions for what gesture this function is performed or configure it through the mobile application.

That's all that can be said about the volume. I also recommend reading an article about why the sound in headphones disappears or stutters. This error is quite common in TWS headsets, so knowing its treatment will not be superfluous.

How to control listening to music via AirPods

There are three ways to control listening to music on AirPods:

1. Via double tap;
2. With auto ear detection function;
3. Using Siri.

Let's consider each of the methods.

Via double tap

To control listening to music via AirPods, you need to assign one of the following actions to the double-tap of each earphone:

1. Stop playback
2. Pause and resume playback
3. Skip to next track
4. Return to previous track

Naturally, you can select only one action for each earphone. For example, by double-tapping the right earphone, turn on the next track from the playlist, and on the left - the previous one .

Using Autodiscover

AirPods also have ear auto-detection. If it is turned on, the headphones themselves will detect when they are inserted into the ear , and audio playback from the connected device will begin automatically.

If you remove one of the headphones while audio content is playing, playback will pause and resume again. Removing both headphones will stop playback without resuming it.

When Auto Ear Detection is turned off, these features are not available and audio content plays through AirPods whether they are in your ears or not.

Using Siri

Siri will help you perform commands that cannot be assigned to a double tap. For example, increase or decrease the volume of the audio being played. Siri itself by double-tapping on the earphone if the appropriate settings have been made.

Why is one wireless earphone quieter?

All headphones that are inserted inside the ear suffer from earwax contamination. This is especially true for in-ear (vacuum) headphones. The speaker itself inside the earphone is covered with a fine mesh, which over time becomes clogged with ear wax and because of this, the sound in the headphones becomes quieter.

Interesting materials:

How much do cigarettes cost in South Korea? How much do home designer services cost? How long to stand in a yoga pose? How much did PS4 cost at launch? How much does 1 MRP cost in tenge? How much does Mau luggage cost? How much does gasoline cost in the USA 95? How much does diesel fuel cost in Ukraine? How much is the Mau baggage surcharge? How much does extra luggage cost in Mau?

Through the functionality of the engineering menu

This method is suitable for advanced users who, in case of failure, can return all the standard settings back. But! Each model has its own commands to call up this special settings menu:

After dialing and pressing the dial button, you are taken to the engineering menu, where you can adjust the necessary parameters.

There are other parameters, but it’s better not to touch them at all:

Each of these modes has its own fine settings, and to understand what’s what, here is a standard list of sound adjustments Type:

Tips: Before changing the default settings, write down all the values ​​on a piece of paper - this may come in handy if you overdo it and set the wrong parameter, for example, the sounds are played too low.

Examples

For many users, when recording video, the sound is incorrect, that is, either too quiet or loud. To fix this, go to the engineering menu by typing the command for your smartphone (see above):

Setting up the speaker

The following is true for the mode when nothing is connected to the phone (Normal Mode), but by analogy you can configure the speakerphone (LoudSpeaker Mode), headset (Headset Mode), etc.

We go to the “Normal Mode” mode.

The "Type" list can list several types of audio devices:

At the beginning of the article, we determined the volume level at which the wheezing of the speaker stops (level 4). Select the "Sph" type. Select the 4th volume level (Level 4) from the “Level” list. Its value is 112. Next, select the nearest level (Level 3) and see that it is equal to 100, the difference between the levels is: 112 - 100 = 12.

Let’s set new values ​​for each of the “Levels” so that the maximum level has the value at which the speaker stops wheezing (112 in my case), and each previous one is less than the current one by a value equal to the difference calculated above.

ATTENTION. BE SURE to write down the factory settings so that in case of an error you can return them back!

After entering a new value, BE SURE to click on the “Set” button next to the input field!

By calculations, I determined the following optimal values ​​for my phone.

For me, the new settings took effect immediately after saving the changed volume values, but some phones may need to be rebooted or even turned off, removed/installed the battery, and turned on again.

Source

How to adjust the volume on Bluetooth headphones?

Therefore, to increase or decrease the sound in headphones on a smartphone, other methods are used, which you will learn about right now. By the way, they are suitable for any operating system (iOS, Android) and manufacturer - Samsung, Xiaomi, Huawei, Honor, JBL, Apple, etc.

Making the sound louder using the buttons on the phone

The most obvious way to change the sound volume is with the corresponding function buttons on the phone body that is paired with these headphones.

After all, in essence, TWS headphones or a regular Bluetooth headset (when the headphones are connected by wiring) differ from wired ones only in the way they connect to a smartphone. Otherwise, these are the same headphones, which means you can increase or decrease the volume through your phone.

Add sound in bluetooth headphones through the smartphone menu

I don’t know why (when there are buttons), but the same can be done through the settings menu on the phone. On Android you need to go to the “Sound and vibration” section

And use the slider to change the “Media Volume” value. To the right we add, to the left we decrease. You can also change the volume of the ringtone, alarm clock, ringtone and notifications.

How to make wireless headphones louder using a proprietary application

Not all, but some models of TWS headphones support their control from a proprietary application that is installed on the phone.
In addition, there are a huge number of other functions here. For example, an equalizer to adjust the sound details of a track. Or even changing the function button assignment.

Increase the volume using the control buttons on the headphones

What is your opinion: is WiFi harmful?
Yes

22.92%

No

77.08%

Voted: 36459

Again, not all headsets have the ability to change the volume of music playback through gestures on the control button. But even in inexpensive models they are found. In this case, most often, to zoom in, you need to press the right wireless earbud once, twice or three times (depending on the specific model). And to decrease - to the left. To find out which audio adjustment action applies to you, check the specifications for your headset.

If Bluetooth headphones have a mobile application, it often has the ability to change the purpose of gestures for ease of use. For example, if double-tapping a key meant switching to the next or previous track, then it can be reprogrammed to adjust the sound volume.

Changing dynamics via voice assistant

If the sound control function in TWS headphones is not provided by the manufacturer, then you can always use them to call a voice assistant. And ask him to increase or decrease the volume. To do this, you need to look at the instructions and find out which gesture is responsible for contacting the assistant.