It is difficult for any modern person to live without a mobile phone. Often phones break during active use, especially the original glass. That is why it should be protected from cracks and other damage with a special adhesive coating. In this article we will look at ways to stick a protective film on your phone with your own hands. In addition, we will reveal the secrets of how to properly stick the film, study their varieties and determine what the need for such coatings is.
- The need for a protective film
- Types and characteristics of film coatings
- Types of protective films
- Terms of use
- DIY materials and equipment for gluing
- How to stick a protective film on your phone: step-by-step recommendations
- Preparing the room
- Selecting tools
- Degreasing the gadget display
- We stick the protective film without bubbles and other defects
- Let's sum it up
How to remove air bubbles from under the protective film: tips
- For many owners of new smartphone models, the presence of modern functions in gadgets is not so important. The main thing is that the phone emphasizes the status of the owner. In the case of a scratched smartphone screen, there is no need to talk about style and status.
- To prevent such possible troubles, a protective film is used that is glued to the phone display. The only difficulty that arises during the work is the appearance of air bubbles under the film.
- If, after gluing the protective film, air bubbles and tubercles have formed, it will be difficult to get rid of them at home without resorting to the services of a professional.
- The reason for the formation of bubbles is the penetration of dust particles or micro-debris particles under the protective coating, which significantly complicates the process of getting rid of the “defect”: in some cases, only complete replacement of the film helps.
How to get rid of bubbles under the protective film:
- We check whether the protective film matches the dimensions of the display.
- We wipe the screen of a mobile or tablet with a microfiber cloth (they are usually supplied with a protective film). You should try to do this in a single movement.
- Turn on a bright light and check how clean the screen of your mobile device is. The display should be free of stains and dust particles.
- When gluing the film, do not touch the exposed adhesive bottom layer of the film, which has a sticker with the number 1 on it.
How to get rid of bubbles under protective film
- We try to glue the protective film so that its edges coincide with the edges of the display and lie exactly horizontally and vertically. We finally remove the bottom adhesive layer and apply the film to the display.
- We make sure that there are no distortions. If it was not possible to avoid their appearance, then we re-glue the film.
- We use a plastic card or a special scraper, which is included in the kit along with the film and a napkin, to remove the bubbles formed under the film.
- After all these manipulations, you can remove the last layer of protective coating, indicated by the blue number 2.
Now you know how to glue a protective film on a smartphone, iPhone 5, 5S, 6, 6S, 7, 8 Xiaomi, tablet and how to get rid of air bubbles.
Types and characteristics of film coatings
In order to figure out how to stick a film on your phone, you should determine which type of film is most suitable for your device. Each manufacturer of smartphone protective film has its own special requirements for the properties and characteristics of protective coatings, which are especially relevant under specific operating conditions.
Types of protective films
There are several types of protective films for smartphones.
- Mirror . This option will appeal to the fair sex. It will not only reliably protect the touchscreen from any damage, but will also become a kind of mirror. However, you should be aware that it slightly reduces the brightness of the image. There may also be slight distortion in the color transfer process. Therefore, before choosing this option, it is important to remember that even the most minor damage to its surface will be especially visible.
- Glossy . This type is considered the most relevant and in demand. It provides high-quality image transmission and ensures high display sensitivity. But there are also disadvantages to this type - this is the softness of the product. If you use it to protect your smartphone, you will have to replace it often. We advise you not to carry your phone in your pocket along with your keys, otherwise after a few days you may notice minor damage to the cover.
- Matte . Applying a film to a phone does not involve any special difficulties. Moreover, it is considered the best method of protection for a smartphone. This material maintains the aesthetics of the device. If you managed to glue the film onto your mobile phone correctly, it will last for a long time. Among the disadvantages are a decrease in the brightness of colors and a slight distortion of the information displayed on the screen.
Now let's figure out how to properly stick a protective film on your phone so that it is guaranteed to cope with its functions for a long time.
Terms of use
The principle of using a smartphone with a protective coating is no different from using conventional devices. The same fast response to touch, no problems studying the data on the screen. All these indicators will not change in any way if you stick the film on the screen correctly. The covering is made of thin plastic and fits so tightly to the screen that it is not immediately noticeable.
Any type of coating must be glued to the glass carefully, without debris or bubbles. From time to time, film materials should be removed, washed and re-glued. This procedure can be performed at home. In this case, the main thing is to know where to stick the film on the phone to avoid small foreign particles. Therefore, before work, you should carefully prepare the room and all the necessary equipment and materials.
Replacing the film
This procedure requires extreme caution and a high level of cleanliness in the area. It is best to carry out all manipulations in the bathroom, since due to humidity, dust does not fly in the air. The following needs to be done:
- We take the smartphone in our hands and smooth out any air bubbles that have arisen with our fingers or another flat, but not sharp, object. If nothing works, then you will have to peel off the film and try to put it back in place again.
- It is best to wipe the display of a mobile device with a special computer wipe. With the same napkin you can clean off all the dirt from the old film.
- Now we firmly take the device in our left hand, hold the edge of the film with our thumb and carefully stick it on the glass so that no air gets under it.
If you were careful and your film is not very worn, then everything should work out without any difficulties.
Main varieties
Protective films can be universal or special for a specific gadget model. The master has a selection of coatings in his store. When choosing a film yourself, you need to know that the universal one will have to be cut and adjusted to the size of the screen, the location of buttons, and speakers. In addition, there are several other types of coatings that differ in their protective properties.
Matte
The anti-reflective coating allows you to work with the tablet outdoors or in bright indoor lighting. Thanks to the matte protection, the device will not slip out of your hands, and your fingers will not leave marks on the screen. But the image becomes grainy, which is especially noticeable on a white background.
Glossy
A transparent thin coating protects the screen from scratches. The gloss does not change the color and clarity of the image, is almost invisible on the screen, and protects the screen from dust and ultraviolet radiation. Transparent films are produced to fit the size of displays. The downside of gloss is fingerprints.
Shockproof
Thicker and denser films protect the screen from cracks due to impacts, pressure and falls from a small height. The shockproof layer can be glued to the child’s tablet. To protect the device, shockproof glass is also glued to the display. The thin but durable transparent plate will withstand the impact of the tablet on the ground with the display facing down. Glass preserves sensor sensitivity, color rendition and is easier to stick on.
Confidential
Through a special filter in the protective layer, information can only be seen by looking directly at the screen. The tablet cannot be viewed from the side or at an angle. Confidential films are used to protect personal data and passwords - if necessary, enter them in public places.
Mirror
The inactive screen uses a reflective surface instead of a mirror, making the tablet even more useful for women. The mirror coating serves as a stylish design, but otherwise does not differ from gloss. When selecting a protective film, you need to focus on the size of the screen - it should correspond to diagonal inches.
Fourth stage
In almost all cases, after gluing the film, bubbles appear on the phone screen. Many people start to worry about these bubbles because they think that they are quite difficult to remove. Other people simply don't pay attention to them and use their phone, trying to ignore them. In fact, all you need to fight these bubbles is two minutes and a credit card.
You just need to take a credit card and then use it to smooth out the protective film until the bubbles are gone. These bubbles are caused by air and are no big deal, you just need to grab them and smooth them out.
After completing these four steps, you will have a perfectly protected screen with a new film. In fact, you don’t need to do anything to care for the film, just wipe the screen occasionally so that it doesn’t get too dirty.
Still, there are some nuances that need to be adhered to when gluing the film, and now we’ll talk about them.
Which is better – protective glass or film?
Owners of modern gadgets often wonder: what is better to glue - film or glass to prevent damage to the phone? Protective glass, although it appeared quite recently, is quickly gaining popularity. It will not only protect the display from scratches, but will also take the impact if dropped. However, when using it, the phone will become a little heavier. The film screen covering will not protect the gadget if it falls to the ground, although it will prevent dirt and scratches.
The standard set of protective coating includes wipes for removing dust and dirt
Various types of film protective products will help extend the life of the touch display. To obtain the desired effect, it is important to follow the recommendations of specialists when gluing the coating.
Instructions
With this simple instruction, you will learn how to stick a bubble-free film on your phone:
- Prepare materials, film, work area and wash your hands. Lay out a clean sheet of paper, install good lighting.
- The red sticker or number 1 marks the first layer of film that needs to be removed. The film is gradually applied to the phone from top to bottom.
- The main stage at which you need to thoroughly clean the screen of even the smallest particles that cause bubbles to appear. To do this, use a silk rag, which is sold complete with film. You cannot use fine-pile towels or cotton pads for this.
- Apply the film without touching the sticky side with your fingers. Do everything slowly, smoothly smooth the fixed part from the center to the edges. The film should not extend beyond the screen.
- After gluing, all irregularities can be smoothed out with your fingers or a card from the center to the sides, if necessary.
- Number 2 or a blue sticker marks the second layer, which must be removed at the end of the work. You can remove it right away, but if you have little experience, then don't rush.
Now you know how to stick a bubble-free film on your phone. But there are still some tips that will help you in this difficult issue and make the work as simple, fast and correct as possible.
Important nuances
The following rules should be followed when working:
- You need to level the coating from the center to the edges;
- smooth out the bubbles until the protective layer No. 2 peels off;
- Do not remove the swollen film with scissors - the sharp ends will scratch the body, screen and damage the coating;
- To make the tape stick more tightly, you need to wipe the film with alcohol;
- instead of scissors, you can use a stationery knife to cut out the universal coating;
- It is better to stick the protective layer on the wide side of the screen - this way there is less chance of moving the film and sticking it crookedly.
The new device comes with a factory-applied film that protects the display from damage during transportation. The technical coating quickly becomes scratched and peels off easily. Simply replace it with a new one. If you need to replace the old protective film, peel it off using tape and a pointed plastic object, starting from the corner.
Share link:
Method two - wet
The main problem with gluing the protection is that if you miss, you most likely will not have a second chance, since when you try to re-glue the protection, you will most likely get jams, bubbles and debris under the protection.
An old trick used by car window tinting experts will help you avoid this.
The display surface can be wetted before installing the protection. In this case, if you miss, the protection can be moved, as it will slide on a cushion of water.
But here it is important not to overdo it with the amount of this liquid, because if the phone is not waterproof, you can destroy it.
The easiest way is to use a window cleaning spray bottle or regular soapy water.
We spray a little on the display, apply protection, level it until it works, and then expel the liquid from under the protection, from the center towards the edges, where a cotton pad is applied, which will absorb moisture and prevent it from penetrating inside.
It is best to expel the liquid with the edge of a bank card wrapped in a soft cloth or microfiber cloth.
What you will need
If the user decides to remove film, then he must first arm himself with tools and prepare his workspace:
- To begin with, it is worth carrying out the procedures in a room where there is no dust and dirt. The day before removal, it is worth carrying out a wet cleaning, and on the day of work, do not open the windows. This will provide a clean space in which dust will not fly;
- You also need a place where there will be no dirt. It is best that it be some kind of comfortable table with normal lighting, since after removal the film is supposed to be glued;
- It is worth arming yourself with tools to pry off the protection. This can be either a toothpick or a regular mediator. Anything the user has can be used to remove the protective film from the phone. Do not use metal objects with sharp edges such as scissors or a knife. This may damage the device's touchscreen and will require replacement in the future. If the user does not want this situation, then it is worth finding a regular toothpick;
- It is worth arming yourself with adhesive tape if the user immediately installs a new one after removing the film. This is necessary not only to get rid of dust or dirt from the device, but also to remove the film. It is worth giving preference to adhesive tape that does not leave behind various glue residues. If such glue gets under the new protection, it will have to be re-glued.
It is also worth noting that the removal process is quite simple. It’s worth talking about the process in more detail later, but even a beginner can handle it. He may not understand how to install the film in the future, but every phone owner should know how to remove it in order to make life easier not only for himself, but also for those who will install new protection.
Review from a buyer on the protective film for Huawei mediapad m3 10 lite
Catalog
- Electronics
- Computers and peripherals
- Office equipment and furniture
- Auto and Motorcycle Products
- Appliances
- Household products
- Construction and repair
- Garden
- beauty and health
- Childen's goods
- Sports, recreation, tourism
- Clothing, shoes and accessories
- Hobbies, creativity, books
- Games, software and entertainment
- Watches, souvenirs, gifts
- Pharmacy
- Pet supplies
- Food
Removing bubbles from fresh film without heating
For this job, you will need to use a rubber putty knife, a construction eraser, or a credit card. It is necessary to gently press on the surface of the tint film and move it with a spatula or eraser to the edge of the glass. Remember that this procedure must be carried out as carefully as possible, which will protect the film from mechanical damage. It is possible to expel bubbles without heating the film only if the adhesive composition has not yet dried. That is why, immediately after the tint film is glued to the glass, it is necessary to conduct a thorough inspection of it. If defects in the form of air bubbles are found, they must be eliminated as quickly as possible. This will allow you to remove such defects with minimal difficulty.
How to glue film, or some useful tips from the editors
There are several recommendations that will help you apply the protective accessory correctly and extend its service life. Useful tips from experts:
- It is not advisable to stick the film close to the edge of the screen;
- if gluing fails, it is possible to remove the protective layer and wash it under water to remove dust particles;
- It is best to apply the accessory immediately after purchasing a new device;
- to completely remove dust from the screen, you can use paper tape;
- During operation, it is recommended to wipe the film with wet wipes.
Protective glass is much stronger than film and can withstand more serious damage.
How to quickly stick a film on your phone
If you have some experience in gluing protective film, and you don’t want to waste time strictly following the instructions, everything can be done faster. But in this case, there is a risk that not everything will work out the first time. For successful completion it is necessary to provide clean conditions without dust in the air.
Quick film gluing:
- Remove the old film and wipe the screen clean.
- Take a new film and remove the bottom protective layer from it.
- Carefully (without touching the sticky side with your fingers) take the film and apply it to the screen.
- Using a plastic card, smooth it out, pushing any bubbles to the edges.
- Remove the protective top layer.
Below you can see video instructions on how to apply the protective film without bubbles as quickly as possible.
What not to do
There are precautions in any process. In the simple film removal process they are also present:
- The user should not remove the film with sudden movements. Such jerks can damage the phone screen. One careless movement can knock out the screen. This is especially true on Chinese models, where the glass does not have a special fit or strength;
- Do not pull the film upward when removing it. It is necessary to remove it using traction to the opposite side. This method will also help protect the device and screen from damage. They will not damage the phone screen, since smooth actions and the right direction will not play a bad joke on the touchscreen;
- Do not perform manipulations with dirty hands. This is also due to the fact that during further replacement, this dirt may get under the new copy of the upper protection. This may cause bubbles and an untidy appearance of the phone.
There are not enough recommendations to ignore them. Gluing and removing films is a simple task for which you should not turn to a professional.
Method one - precise positioning
For this we need ordinary stationery tape.
In order to evenly and accurately stick the protection, be it glass or film, you must first center the film/glass on the phone display without removing the protective films from the protection (sounds strange, but I hope it’s clear what I’m talking about).
After you have centered the protection, holding it on the display, carefully glue a strip of tape along the long edge of the phone, one part on the film, the other part on the phone. The most important thing is not to move it while gluing the tape.
More about Huawei: Honor V30 Pro review
After the tape is glued, we will get a kind of book from the phone and protection.
After this, all we have to do is find a dust-free room, for example, a bathroom, in which a hot shower was turned on for a couple of minutes before, and, carefully peeling off the inner protection from the film, moving from the edge, smooth the film on the display with smooth movements.
This method is best suited for gluing protective glass and a little less suitable for films.
