How to remove an administrator in Windows 7 - step-by-step instructions

The Windows 7 operating system is multi-user, which means that you can create several accounts with different rights at once: from a guest who does not need anything to log in, to a simple user or administrator. Sometimes it becomes necessary to delete one privileged profile in order to create a new one or gain even more rights to manage the operating system. You need to figure out how to delete an account in Windows 7 and in what ways this can be done.

How to disable super admin?

Actually, these are all the main ways to delete user registrations. This could have ended there, if not for one “but”. Most users know that, starting with the seventh modification of Windows, a so-called super administrator appeared in the system, with maximum rights and privileges. Because of this, you have to run some programs as an administrator, and even agree to the warnings issued by the User Account Control Center. It is, of course, not recommended to disable the control level, but you can get rid of the constant requirements of the system. To do this, you just need to deactivate the superadmin entry. After this, all programs will initially be launched as administrator, and control center warnings will no longer bother you.

To deactivate, call the command line (necessarily as an administrator and only this time), enter the command shown in the image above and press the enter key. After execution, even a restart is not required.

Procedure for disabling an admin at the login

The above instructions apply when a person knows the password to log into the admin account. But what to do if the code is lost, because human memory tends to forget character sets of even important access codes?

You will need to reset the code by following the following sequential steps:

  1. Start the PC from bootable media (booting can be done using the flash drive/disk from which “Seven” was installed or from “LifeSD”);
  2. Specify the language and click “Next”;
  3. Click “System Restore”;
  4. Click “Next”;
  5. Click “KS”;
  6. Insert word: regedit;
  7. Click “Enter”;
  8. In the “Registry Editor” window that appears, click on “HKEY_LOCAL_MACHINE”;
  9. Enter the “File” tab;
  10. Click “Load bush”;
  11. Expand the contents of the system volume;
  12. Enter the directory called “Windows”;
  13. Go to the subdirectory named “System32”;
  14. Click once on the file without an extension called “System”;
  15. Click on the virtual key labeled “Open”;
  16. Type "killAdmin";
  17. Click “Ok”;
  18. At this point, you can congratulate the user for creating a new hive “HKEY_LOCAL_MACHINE/killAdmin/Setup”;
  19. Enter the “Setup” directory in the new hive and click “CmdLine”;
  20. Type “cmd.exe” in the “Value” column;
  21. Click “Ok”;
  22. Next, by analogy with the last 3 actions (from 19 to 21), assign “2” to “SetupType”;
  23. Select the created new bush again and go to the “File” tab;
  24. Click “Unload bush”;
  25. Click “Yes”;
  26. Exit all running windows;
  27. Remove the bootable media from the optical drive or USB port;
  28. Restart PC;
  29. After restarting the PC, “KS” will be displayed on the initial screen, into which you should insert the text: net user (administrator name) (new access code);

Note: The text inside brackets is typed in Latin. After coming up with and entering a new password, it is recommended to write it down in a notepad.

Remember: “Even the most battered notebook remembers passwords much better than human memory.”


  1. Click “Enter”;

  2. Ready. Now the computer owner can log into the OS under the guise of an administrator and easily delete users he does not like.

If you need to reactivate a hidden admin account, you will not be able to do this with the basic privileges of a guest or an ordinary user in normal mode.

To do this, you need to start the PC in safe mode and follow the instructions of the 1st method described at the beginning of this manual, but in step number “10” instead of installing o, you should, on the contrary, remove it and click “Ok”.

Source

Disabling via the PC Control menu

How to Remove Administrator in Windows 10 - Disable Account

Removing an administrator account in Windows 7 can also be done through PC Management. For some, this method is preferable since fewer steps need to be performed. The step-by-step instructions are as follows:

  1. Minimize all windows and go to the desktop of your personal computer or laptop.
  2. Find the “Computer” or “My Computer” icon and right-click on it.
  3. From the window that appears, select the “Management” line.
  4. In the left part of the window, expand the “Utility Utilities” item and select the “Local Profiles and Groups” sub-item.
  5. From the entire list received, click on the “Users” link.
  6. Go to the right side of the window and indicate the account that you want to deactivate.
  7. Right-click on it and select “Delete” in the context menu.
  8. Confirm your intentions in the window that appears.

How to hide an account

Removing the basic Administrator account can seriously hamper your ability to use Windows. On behalf of this user, the system is managed and its configurations are changed.

If you do not want someone to log in as an administrator and accidentally damage your computer, the best solution is to hide this account.

To hide your account, you can use the Windows command line. To do this you will need to do the following:

After completing the steps, restart your personal computer to confirm the changes made. Now the Administrator user account will not be visible in the system management interfaces and the list of accounts available for login.

Microsoft Windows Vista FAQ

Q: How to hide the user account in the welcome screen

In order to hide an account in the welcome screen, you need to create a subkey named SpecialAccounts HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon . and in it there is another one called UserList . Then, in the UserList , create a parameter of type REG_DWORD with a name equal to the name of the account that you want to hide and with a value equal to (zero), respectively, to display this account in the welcome screen, the value of the parameter will need to be set to 1 (one) or delete the parameter.

You can also copy the text of the code into a text file, correct the parameter name ( User ) to the name of the account you want to hide, save the file, assign it the *.reg and run the resulting file, agreeing to make changes to the registry.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogonSpecialAccountsUserList] Blast =dword:00000000 Please note that along with hiding an account in the Welcome screen, this account will also be hidden from the User Accounts applet in the Control Panel.
Of course, you can manage (configure) your account from the Local Users and Groups snap-in, which can be opened through Start - Run - lusrmgr.msc . as well as in classic user account management: Start - Run - control userpasswords2
Zhenya

at -01-04 20:08:37 SpecialAccountsUserList] I don’t have this in Winlogon [delete]

Zhenya

at -01-04 20:11:46 I have only 3 files there AutoLogonChecked,GPExtensions,Notify I have Windows 7 64 bit [delete]

Kakaka

at -01-13 17:40:39 does not work on Windows 7

Egor

at -12-07 15:48:00 On Windows 7 it doesn’t work, I pressed counter alt divides a bunch of times and I can’t log in, but I can on Windows XP. What other login options are there? [delete]

old school user

at -11-14 08:19:19 Hidden everything. good advice. [delete]

Lamer

at -12-24 21:10:09 How to enable double pressing CTRL ALT DEL on Win7 x64. [delete]

totti

at -11-22 17:52:26 I did everything, but the accounting record did not disappear! What to do? Windos7 [delete]

Andrey

at -05-25 03:32:27 Guys, everything is simple. If you cannot enter using the control al divide, enter another way. In the username, write .username (this means that we are logging into the current computer or domain), but for this you will probably have to enable forced control alt and perhaps disable the ability to select a user, which is not convenient to enter everything yourself every time [delete]

Boris

at -12-26 06:49:58 What if it’s W-7? And there is no user selection window at all? [delete]

micropool

at -05-19 10:02:21 tell me who knows. how to run this hidden account on 7. cntr+alt+delit 2 times does not work. tell me how to enter it without removing it from stealth

Vitas

at -09-20 12:37:52 It's simple. Boot through safe mode. And if you need to run the program on behalf of this hidden admin, then press Shift + right mouse button - Run as another user name. Enter the username and password of the hidden admin and go ahead [delete]

Instructions

If you have multiple accounts on your computer, log in using the account that was created with the “Administrator” status. After the system has fully started, open the Control Panel. This can be done through the Start menu.

In the window that appears, in the “View” column, the “Small or large icons” view should be selected. This will speed up the search for the desired element. If you choose from the categories, the item you require will be located in the “System and Security” section. This window will display subsections that are necessary to manage all system functions. Select Administration.

In this Control Panel item, find the line “Computer Management”. Launch it by double clicking. In the newly opened window, on the left side, expand the “Local users and groups” section. Two folders will appear in front of you. Select Users. It stores information about all accounts that were previously created on the computer.

Select the account that has the “Administrator” status. Open it also by double clicking. When a new tab appears, all properties of this account will be visible. To disable the “Administration” function, check the box next to “Disable account”. After this, click OK.

You can also disable administration using the command line. To do this, open the Start menu, then the Accessories section and the Command Prompt function. Write the following text in it: “Net user Administrator /Active:no”. Then press the Enter key. The system will inform you that this feature is disabled. As a result of these actions, the Administrator account will be disabled. Exactly the same manipulations can be performed to disable any other account.

Attention, TODAY only!

Everything interesting

The Windows operating system is initially designed for multiple users. In order to save the parameters of a specific user, it is necessary to create individual accounts for each of them. And if necessary, they can be...

Several users can work on a computer running the Windows operating system under different accounts. If an account is disabled, that member will not be able to log in. Instructions 1To enable your account...

One of the features of the Windows Vista operating system is that the Administrator account is disabled by default, i.e. The access of the owner who is a member of the administrator group remains limited. Changing this...

For a user to obtain administrative rights in the Windows operating system version 7, it means enabling the built-in, but disabled by default, Computer Administrator account. Instructions 1 Log in with your...

The procedure for disabling the built-in administrator account requires that you have a user who is a member of the computer's local Administrators group. Instructions 1Call the context menu of the desktop item “My Computer”...

Activating the computer Administrator account, disabled by default in Windows Vista and Windows 7, may be necessary when executing system commands that require running as Administrator. Instructions 1Press the button...

In some cases, a PC user may need to disable a particular user account. Please note that disabling an account is just a deactivation, not an account. Today I will show you how to do it correctly.

First way

First of all, we need to get into the control panel. To do this, click on the “Start” button and select the item of the same name.

The second option is to press the WIN+R keys on your keyboard, a window will appear in which you need to write the word control

and click OK.

The control panel is running. Here we find the “Administration” item and click on it.

In the new window we see several different items, but we are only interested in one - “Computer Management”. Let's go into it.

In the “Computer Management” window, click “Local Users and Groups”, then “Users” and select the user by double-clicking on it with the left mouse button.

The user properties window will open. To disable an account, check the box next to “Deactivate account” and click OK.

Actions in the registry

Finally, let's consider another removal method, although it is far from the most convenient. It is provided, so to speak, for general information, since ordinary users are unlikely to engage in such things.

So, open the registry editor by typing regedit in the Run console and go to the HKLM branch. Here you need to go down the directory tree through the SOFTWARE section and stop at the CurrentVersion directory, which contains the ProfileList subfolder.

In this directory we are interested in all files whose names contain the designation “S-1-5”. When entering such sections, primary attention should be paid to the ProfileImagePass parameter, the value of which must correspond to the full path of the user directory in the Users directory on the system drive. Now it's a matter of small things. You just need to delete the section in which the desired parameter is located. After this, it is imperative to perform a complete reboot of the computer system.

How to delete a simple user or guest account

How to remove old Windows 10 updates - step-by-step instructions

A regular user account is disabled in the same way: through the “Control Panel”, using the “Computer Management” section or “Registry Editor”. The first two methods have already been described, so here is the third:

  1. Press the key combination “Win ​​+ R” to open the “Run” utility window.
  2. In the command line, write “regedit” and press the “OK” button.
  3. Wait for the Registry Editor program to launch.
  4. Go to the path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList to open the ProfileList key with settings for the list of users registered on the computer.
  5. There will be subfolders in this directory. It is easy to understand which one corresponds to the user. The “ProfileImagePass” parameter will indicate the path to its system folder with the name.
  6. To delete an account, you need to select its directory and erase it from the registry. You also need to do the same with the directory on the system drive C.

Important! Working with the registry is not the most pleasant experience for a newbie or inexperienced user. In addition, this is dangerous, since one incorrect deletion, and the computer may simply not turn on, or its operation will be disrupted.


When deleting through the registry, it is not necessary to know the account password

To prevent this, you must back up all program keys and settings. To do this, before making any changes, go to the “File” section and select the “Export” subsection. Next, you need to specify the name of the backup and the path to save it to your hard drive. If something doesn’t go according to plan, you can always find this file with the REG extension and run it by double-clicking the left mouse button. You must first agree that some registry data will be changed.

A guest account cannot be deleted. It can only be turned on or off. This is done as follows:

  1. Go to the Start menu by clicking on the corresponding button on the keyboard or the virtual button at the bottom left of the screen.
  2. In the search bar, type the phrase “Control Panel” and click on the name of the program that appears in the search results.
  3. Wait for the utility to launch.
  4. Set the section display mode to “Large Icons” or “Small Icons”.
  5. Find the section with user accounts.
  6. Select the “Guest” profile and double-click on it.
  7. Disable it in the window that appears if it was active.

Hiding a user account

Warning! Before hiding the administrator account, make sure that there are other administrators on the system. If you hide the account of a single administrator (or all administrators) using the following method, you will no longer be able to gain access to write values ​​to the registry. Accordingly, you will not be able to return the hidden administrative account to the welcome screen. In this case, to solve the problem you will need to edit the registry using an offline editor.

1 Press Win+R .

2 Type cmd .

3 Press Enter or OK :

4 Enter the net users .

5 Press Enter .

6 Copy the Name of the account you want to hide. (how to copy data from command line)

Keep in mind that First Name and Full Name are two different things. In this case, we need to know the Username (in English terminology - Name ).

7 Press Win+R .

8 Type regedit .

9 Press Enter or OK :

10 Find the section

11 Create a SpecialAccounts :

12 In the SpecialAccounts , create a UserList :

The path should look like this:

13 In the UserList , create a new DWORD (32-bit) value :

14 For the setting name, enter the name of the account you want to hide from the Welcome screen. (In our example, we will hide the user 'Compfixer.info'. Therefore, we give the same name to the DWORD parameter).

Leave it at 0 to hide the user from the welcome screen.

To check the result, restart your computer. As you can see in the picture, the specified user has been hidden from the welcome screen:

Administrator rights - what are they? who is this? how to run with these rights?

Very often your computer or laptop asks you “would you like to make changes in the Windows operating system” when installing any games or programs. What we do is, of course, we agree, we deliberately establish something. It happens that to configure the system and any software you need administrator rights. So who is this fucking administrator, how to run with administrator rights, how to configure (turn on or off) these rights, where and why we need administrator rights. This is actually what the article is about.

Who is this administrator?

In Windows operating systems, 2 users are created by default: yours, which you select when installing the system, the second is the same Administrator. A kind of administrator rights are special protection for Windows XP, 7, Vista, 8, 8.1 from unwanted settings changes that can be made by an inexperienced user. These changes may cause Windows to crash or become unstable. In the latest versions of Windows, when you try to make any changes, the operating system asks you whether these changes are necessary, for example:

Removing users through the password control section

How to remove Linux and leave Windows 10 - step-by-step instructions

You can disable the account of any OS user using the “User Accounts” section. To do this, you need to follow the step-by-step instructions attached below:

  1. Press the key combination “Win ​​+ R” to open the “Run” utility window.
  2. In the command line, write “netplwiz” and press the “OK” button.
  3. Wait for the “Profile Administration” item to launch.
  4. Go to the “Users” section, select the desired account and disable the “Require username and password” option by unchecking the corresponding checkbox.
  5. If you want to delete an account, then select it and click on “Delete”. Sometimes permission will be required for this and you will be asked to enter a password.


Disabling via “Password Control”

The material discussed how to remove a second user in Windows 7 and in what ways this can be done. In fact, the process to disable accounts is not complicated. You don't need to be a system administrator to handle this. Sometimes users want to turn off their old account because they forgot their password or they no longer need it. Fortunately, there are many ways to do this.

Removing an administrator

To delete the Administrator account, you can use a special service interface, which can be launched through the “Run” dialog. In order to successfully carry out this operation, follow the instructions:

In general, the account from which you are deleting a user must have administrator rights on the computer (especially if you are deleting an existing administrator account). If she currently has the rights of a simple user, then first log in as an existing user with administrator rights and give the desired user (the one you plan to work under in the future) administrator rights; how to do this in different ways is written in the manual “” .

Rating
( 2 ratings, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]