Turn on the keyboard sound on Honor and enjoy the sound of the keys


There are two types of virtual keyboards for entering information on smart devices.
The first type is the classic layout, the second is the dialer. Since both types do not have a physical shell and are presented in the form of a virtual panel, manufacturers have included in smartphones the function of vibration response and sound notification of pressing. The same capabilities are present on the virtual keys “back”, “menu”, “recent applications”, “home”, and the fingerprint scanner.

How to click and what to select

But it’s not enough to know the button combinations. You need to press them correctly!

There are two systems.

Hold all the buttons together until the Recovery menu appears

Hold the buttons until the splash screen appears, and then release ONLY the power key. Then Recovery appears.

In the Recovery menu itself, using the volume rocker, you need to find the item Wipe data or Factory reset or Factory defaults. The selection is confirmed using the power button. If the device asks if you are sure, click on Yes - delete all user data. Sometimes there is a touch Recovery menu. It is easier to work with him, but this rarely happens.

Then the cleaning process will begin. At the end, the smartphone or tablet will restart itself or notify you that the operation has been successfully completed. Then you will have to go through the Recovery menu again and select Reboot system now or reset the device’s battery.

Turn it on and configure it as you did when you first started it after taking it out of the box!

Common problems and solutions

Difficulties rarely arise in the question of how to remove the keyboard sound on an Honor phone with Android. By following the instructions discussed above, you can adjust the audio to suit your personal preferences, set a melody, and activate or remove vibration feedback. But there are situations when you cannot turn on the sound on the Honor phone keypad. The cause may be system failures or other problems with the smartphone. Take the following steps:

  • Reset the default application. Go to Settings, and then twice to Applications. Find Swift Key in the list, and then enter Memory, and then Reset. Restart your Honor mobile phone and check the result.
  • Check the mode. In a situation where the sound of the keys on Honor does not work, make sure to turn on the audio on your smartphone. To do this, enter the settings section and go to the section of interest. Check to see if audio mode is disabled on your mobile device. Also make sure your phone is not in silent mode.

  • Install an additional application if there are no problems with low memory. If the standard software does not work, install another application from Google Play. Alternatively, you can install Yandex Keyboard. There is a correction option, built-in emoticons, stickers and GIFs, an intelligent learning system, a built-in translator and other options. After that, try turning off and on the sound of the keys on your Honor phone.

  • Remove the conflicting program. If you experience problems with the keyboard on your Honor smartphone after installing an application, remove it, and then restart the device. In this way, you remove the conflicting software and restore normal operation of the software.
  • Check your smartphone for viruses. Sometimes difficulties arise due to the action of malware that blocks the operation of the built-in software. Install any antivirus program, check Honor for malware and remove it. After this, restart the device,
  • Perform a reset. If your Honor has difficulties with the audio or the program itself, do a factory reset. Don't forget to create a backup copy first so as not to lose important data.

Now you know how to disable and enable the keyboard sound on Android Honor, what needs to be done for this, and what difficulties may arise. As a last resort, you can always contact support and ask how to resolve the issue. To do this, call the call center at 8800 7001677 or submit a request in the online chat hihonor.com/ru/support. When communicating with specialists, explain the essence of the problem and the actions that were performed before the call.

In the comments, describe what problems you encountered with the keyboard and how you managed to solve the problem.

How to enable/disable vibration

Above, we looked at how to turn on the sound of keys on Honor if a person wants to diagnose keystrokes. But there are situations when, instead of an audio effect, only vibration is needed. In this case, take the following steps:

  1. Go through steps 1 to 5 of the first instructions in the article.
  2. Find Vibrate when you press keys.
  3. Move the toggle switch to the left to disable or to the right to enable the option.

If you select the latter option, you can choose the duration of the vibration response. And then, if you change your mind, you can turn off the keyboard vibration and enjoy the silence.

Step-by-step instructions for muting the sound

Disabling occurs in the following order:

  1. Go to the “Control Panel”.
  2. So let's go to the special features section.
  3. Looking for “Change keyboard settings”.
  4. Next you need the “Enable voice switches” item. You need to uncheck the box next to it.

Just 4 steps, and no more unnecessary sounds will distract you from the main process when working with your PC.

Important! If you want to experiment with screen design, don't be afraid to do something “wrong”. We have prepared for you a detailed step-by-step guide that will help you get everything done quickly and easily. Follow the links below to individual articles on our useful tips portal:

  • How to remove screensaver from desktop?
  • How to make a changing desktop background?

Audio service disabled

A non-starting audio service can be a major cause of muted audio. To run it, follow the instructions below:

  1. Right-click on “Start” and open the “Computer Management” section.

  1. Expand the “Services and Applications” tab, double-click on the “Services” button, find the “Windows Audio” line in the drop-down list, click on it and click on “Run”.

  1. We restart the computer and check for sound (music or Skype) - all problems should be resolved.

If there are system problems in Windows, one of the proposed methods should fix the problem.

Driver problems

A sound card, like any other device, requires the latest versions of drivers in the system to operate; if they are missing, problems may arise.

To check the availability of drivers and update them to the latest version, we carry out the following sequence of actions:

  1. Right-click on the “Start” menu and select “Device Manager.”

  1. Find the “Sound, game and video devices” section, click on the audio device and select the “Update drivers” line. If there are no audio devices in this section, and among other devices there are unknown ones with a “?” sign, then the drivers are not installed at all.

  1. We perform an automatic search for drivers. If new versions exist, the system will automatically find and install them.

  1. If the device is displayed as unknown, you should install the drivers from the CD that came with the laptop or from the official website of its manufacturer.

In most cases, the above steps will solve all problems. However, there is one more detail that can turn off the sound.

How to increase sound on a computer using the keyboard

I think that modern people can no longer imagine life without technology. This is especially true for a personal computer. After all, with its help you can work, listen to music, communicate and do much more.

To perform some operations, you can use both the mouse and the keyboard. The fact is that any keyboard has certain key combinations (so-called “hot keys”) that allow you to execute certain queries or commands.

For example, by simultaneously pressing “Win+R”, you can quickly search your personal computer; in other words, you can perform assigned tasks using various key combinations. You can also use them to adjust the volume level on a personal computer, laptop or netbook.

Of course, there are keyboards where you don’t have to worry about remembering the key combination, since there are two buttons on them that are responsible for increasing or decreasing the sound. But, unfortunately, such buttons are not present on all keyboards.

It is also not always convenient to use a mixer to increase the volume. This is especially true for various games, when in order to perform this action you have to minimize the window or exit it altogether. This article will talk about how to increase sound on a computer using the keyboard.

How to increase volume on PC using keyboard

It is very convenient when the keyboard has special buttons for controlling sound, but not all have them. Because developers are increasingly trying to reduce the number of keys. To do this, the functionality of the removed keys is distributed among those that remain, making them multifunctional keys.

For example, some developers put speaker icons on the keys with the letter “F” or highlight in a different color the keys that, in addition to the main specific function, are also responsible for sound. For these purposes, some developers create certain combinations that are used to reduce or increase the volume.

So on small keyboards, it is possible to control the Winamp program and therefore, when listening to audio recordings through it, if you need to make the sound quieter or louder, you can simultaneously hold down the “Shift+2” or “Shift+8” keys. Sometimes this combination is replaced by simultaneously pressing Shift and the up or down arrow.

NirCmd utility

In addition, there is a special utility called “NirCmd”. Of course, you can use it to assign a convenient keyboard shortcut to increase or decrease the volume, but these keys will not perform their functions in full-screen mode. You don't really use them during the game either. So I don't think this is a good option. Although, whatever suits you.

Keyboard combinations to increase sound on a laptop

With laptops everything is quite simple. Almost every keyboard has a key called Fn. It is usually located in the lower left corner. On the top of the keyboard, where the F1 through F12 keys are located, two of them should have speaker icons.

Most often these are “F11 and F12” or “F7 and F8”, and the image of the speakers can also be on the up or down arrow keys. Thus, to make the sound louder or, conversely, decrease it, simultaneously hold down the “Fn” key in combination with a key in the form of a speaker.

For example, holding “Fn+F11” on Asus laptops will decrease the volume, and using “Fn+F12” will increase the sound.

How to increase sound on a computer using the keyboard, summary

As you can see, increasing or decreasing the volume level on a personal computer, laptop or netbook using the keyboard is quite simple, and most importantly, very convenient in some situations.

However, depending on your device and operating system, the hotkeys may not match those described in the article. What to do? It's not all that complicated. Bring up "help" by pressing F1, (look at your keys, look for a question mark if there isn't one on F1).

In the Edit section, find a list of hotkeys for your device. Remember or write down the keyboard shortcuts, or simply the keys responsible for adjusting the volume on your personal computer. Good luck!

Interesting articles:

  • How to transfer a VKontakte group to another person;
  • I can’t hear the person I’m talking to on the phone;
  • How to find a phone by GPS via a computer;
  • How to open startup programs in Windows 7;
  • How to use cloud storage.

PS I am attaching a screenshot of my earnings in affiliate programs. And I remind you that anyone can earn money this way, even a beginner! The main thing is to do it correctly, which means learning from those who are already making money, that is, from Internet business professionals.

Get a list of proven Affiliate Programs in 2022 that pay money! Download the checklist and valuable bonuses for free

=>> “The best affiliate programs of 2022”

ingenerhvostov.ru

How to adjust the sound on the keyboard | Defad store - your computer warehouse

24.11.2014

In this article we will talk about how to adjust the sound on a computer using the keyboard without any problems. In the age of computer technology, it is difficult to imagine modern life without the use of electronics. In addition to work, the computer is used to listen to music or watch movies, and therefore its functional equipment is continuously updated.

Solution

A bulky keyboard takes up quite a lot of space on our desk and, undoubtedly, this is a bit of a problem. To resolve this, developers reduce the number of buttons on the keyboard, transferring their functionality to the program interface, or make the keys multifunctional.

Most buttons perform multiple tasks or are capable of printing different graphics. The character field is indicated in two colors, with each character on the button located in its place. On modern computer and laptop keyboards there are symbols of a third color. Such keys are responsible for system functionality, in addition to which certain actions are specified, which reduces the user’s work time.

Multifunction keys

  • "Fn"
  • "Shift"
  • «2», «8»
  • Up/down arrows
  • "Crossed out column"

A key highlighted in a contrasting color with the letter combination “Fn”, usually located in the bottom row of buttons. When pressed, the functions of the third type keyboard are activated.

Buttons with a contrasting color are indicated by a column symbol with lines extending from it, which means that such a key makes the sound louder. The key with the fewest lines makes the sound quieter. Instant mute is activated by a button with a crossed out column located on it. In addition, this key turns on the sound when pressed again if it was disabled. You can press and hold the Fn key while simultaneously adjusting the computer sound volume using these buttons.

Small keyboards are equipped with buttons responsible for controlling the Winamp program. While playing music, you just need to press and hold “Shift”, while at the same time holding down the numbers “2”, “8”, which perform the commands “quieter”, “louder”. The function of these buttons can also be performed by the “down” and “up” arrow keys, respectively, when simultaneously pressing “Shift”.

In addition, modern keyboards are equipped with built-in speakers and a volume control wheel. This option is available when installing the appropriate driver. It is loaded from the disk supplied with the keyboard, and the driver can be easily downloaded on the Internet from the official manufacturer’s website.

defad.ru

Sound profiles in Android

On some Android devices, sound is configured using profiles. In the settings they are called “Sound Profiles”. You can customize them all for different occasions. Usually there are several of them: “Mute”, “Meeting”, “Street”, “Normal” and others. By default, your device uses the normal profile.

To configure one of them, select it:

  • “Normal” - in this profile you can disable/enable vibration when entering text using the virtual keyboard. Vibration will also be activated for incoming SMS messages and calls. In the settings you can set the melody of the ringtone, alerts, messages. As well as sounds of touching the screen and locking;
  • “Mute” - like the “Meeting” profile, it only has an activation button. Mute completely turns off the sounds of the device, meeting - turns on vibration instead of sounds;
  • “On the street” is a profile with all active settings, signal, vibration when touched, blocking, etc.

But you can use custom profiles to suit your preferences. For example, one of them can be configured for everyday use of a smartphone. The other is for places where sounds are not needed, and vibration will be enough to understand that you are receiving a call or an important message has arrived.

Is it possible to change the keyboard sound?

The next question for smartphone owners is how to turn on a different sound when typing Honor. The mobile device has an option that allows you to set a melody. The algorithm of actions is as follows:

  • Go to the settings section, and then - Sounds and vibration.

  • Scroll down and click Other Settings...

  • Click on the Key Sound button.

  • Choose one of three options. If you are interested in how to change the keyboard sound on Honor, select Ringtone or Default.

However, you won’t be able to select your own melody on Honor.

Selecting sounds and vibrations

Open Settings

> Sounds, Haptics (on supported models) or Sounds (on other iPhone models).

To set the volume level for all sounds, drag the slider under Ringing and Alerts.

To choose vibration sounds and patterns, tap the sound type (for example, ringtone or message sound).

You can follow the steps below.

Select a sound (scroll to see all sounds).

Ringtones are used for incoming calls, alarms, and timer, and message sounds are used for text messages, answering machine, and other alerts.

Tap Vibrate and select a vibration pattern, or tap Create Vibration to create your own vibration pattern.

Activating keyboard sound when pressing Num Lock, Caps Lock on a computer

The popular Windows operating system allows you to configure a sound alert when you press special lock buttons:

  • The Caps Lock key, when activated, allows you to write all text in uppercase. Repeats the function while holding down the SHIFT key;
  • Num Lock activates/deactivates a special number pad on the right, which is found on almost all classic keyboards;
  • Scroll Lock - the function of this key in active mode is to move the screen, not the cursor. When you press it and move the cursor in a document or browser, it is not the cursor arrow that moves, but the screen. But it may have other purposes, depending on the OS.

To customize the sound of these keys on your keyboard, you need to:

  1. Open the control panel. In Windows XP and 7 it is located in the Start menu. In other versions of the OS, do the following: press WIN + R together and enter “control”. Press Enter or OK;
  2. Select "Special Features";
  3. In the next section, click “Change keyboard settings”;
  4. Find the section with enabling the sound of the Lock keys and check the box “Enable voice acting...”.

Now try pressing one of the keys whose name ends with “Lock”. And you will hear a soundtrack. Usually these are two different sounds: for activation and for deactivation.

For most laptops, the instructions for turning on will be the same. But the laptop keyboard has special “Fn” keys. They allow you to configure various settings without resorting to the control panel in the operating system. For example, you can increase or decrease the sound from speakers or headphones using Fn+right/left arrow. Or completely turn off the sound to the output device using Fn and the button with the speaker crossed out.

It often happens that the sound on the computer disappears. Find out what to do.

Turn call volume on or off on iPhone

To put your iPhone into ringing mode

or silent mode, slide the Ring/Silent switch.

In ringing mode, iPhone plays all sounds. In silent mode (the toggle is orange), iPhone doesn't play ringtones, alert sounds, or other sound effects (but doesn't turn off vibration).

Important! When iPhone is in silent mode, alarms, sound apps (like Music), and many games still play sound through the built-in speaker. In some countries and regions, the sound effects of Camera, Voice Recorder and Emergency Alerts are played even if the Ring/Silent switch is set to Silent.

Source

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]