Look, this article is a judgment-free zone. Whether you've thrown your iPhone down the toilet or regularly showered it (guilty), there's likely to be some water left in its speaker grilles. This causes the sound to soften and/or sound muffled, and pumping out water is not an easy task. Luckily, there's an app for that.
Starting with the 7s and 7s Plus, most iPhone models are rated IP67 for dust and water resistance. However, Apple has not included a built-in way to force water out of the speakers, as has been the case on the Apple Watch since Series 2. When water gets into the Apple Watch's speakers, the watch will use a vibrating speaker to actually dislodge the water, either automatically or manually .
Even with the waterproof rating that the new iPhones have, there is no built-in tool for removing liquid from the speakers. This may happen someday, but for now we can simulate the Apple Watch feature using the Sonic app developed by von Bruno.
If you have an older iPhone, such as an iPhone 5, 6, or 6s, that does not have water resistance, do not use this app as it may actually damage your speakers. For these models, simply place your iPhone on an absorbent cloth, fabric side down, and wait until the water drains out. This method will also work for iPhones with IP67 waterproofing, for what it's worth, but Sonic will speed up the whole process.
Set frequency manually
To do this, you need to swipe up and down to adjust the frequency (Hz) and you can tap Play to play the sound and continue adjusting if necessary. The ideal water dispersion frequency is said to be around 165Hz, so do your best to get it somewhere nearby. With the frequency set to the best location, the mechanical vibration waves of pressure and displacement will shake the water.
Make sure your iPhone volume is up and then keep an eye on your speakers. Depending on the amount of water, you should see small droplets of water coming out of your speaker grilles. You may even see some coming out of the speaker through the speaker. But even if you don't see any water coming out, your iPhone should start sounding normal again. Click "Stop" when you're done.
Mechanical cleaning of the speaker - how to clean the device without disassembling it
Before we talk about the procedure for mechanically cleaning an iPhone, a warning should be made: you need to act extremely carefully in order to avoid scratches and cracks.
Brute physical force is not something that should be used during the procedure.
So, for mechanical cleaning we need a dry, clean toothbrush. With its help, you need to carefully remove dirt that has clogged into the holes in the iPhone speaker mesh.
Of course, you can clean your smartphone speaker in the usual way, using improvised means such as toothbrushes and toothpicks, but in this case there are certain risks, so you have to act with extreme caution
You can also use tape. They usually make a small ring out of it with the sticky side facing out, and then “roll” it over the problem area.
Never use any liquids (including alcohol) to clean the speaker yourself: this may damage the component.
If moisture gets into the speaker, you will not be able to solve the problem yourself. There are no options: you will have to take your smartphone to a service center for professional cleaning.
How to clean iPhone speakers using services
Experienced specialists work in service centers. To clean the speaker, they first disassemble the smartphone and then remove the protective mesh. If it is damaged, the mesh is replaced with a new one. If everything is in order with it, they simply clean it and put it in place, and then assemble the device.
It is important to note that for a professional, assembling and disassembling an iPhone and cleaning or replacing the speaker grid is not a problem, but a completely familiar process.
However, if you have never disassembled an iPhone before, then it is better not to risk it. In this case, repairing malfunctions that arose due to your intervention may ultimately cost much more than simply cleaning the speaker from a specialist.
If you don’t want to take risks, and speaker cleaning applications seem dubious to you, contact a specialist
As you can see, there are plenty of ways to clean your iPhone. Some of them are completely safe, others are relatively safe. However, if you have never cleaned smartphones, we recommend that you still use the help of a professional who knows exactly what and how to do in order to carry out the cleaning procedure painlessly for your smartphone.
Use automatic setup
If your phone is still muted after the 165Hz method, Sonic has another way to drain the water from your speakers. Tap and hold the water drop icon in the center of the screen to create a frequency greater than 165Hz, then lift your finger to stop the sound.
The frequency shown on the screen does not affect the water drop method. Whether Sonic shows 440Hz, 1080Hz, or whatever the output is, the same sound will come out through your iPhone when you press and hold a drop of water.
Sonic is really easy to use and is definitely a must-have app if you use your iPhone on the water a lot. Since these IP67 iPhones can be fully submerged in water up to 1 meter deep for up to 30 minutes, there's a good chance you'll be using this app frequently since you won't have to worry about those dreaded liquid contact indicators.
Read: How to Play Game Boy Advance and Game Boy Color Games on iPad or iPhone - Without Jailbreaking!
Rate the article!
Part 1. When do you need to clean your iPhone speaker?
In fact, we suggest that you clean your iPhone speaker regularly, at least once a month, but there are some situations that are extremely necessary to get the job done:
1. Long-term use. If you have been using your iPhone for a long time, such as several years, now is the time to clean your iPhone speaker. Even if you use an iPhone case, the speaker port should collect a lot of dust.
2. Just finished a long trip. iPhone is the most important device when traveling. We use it to take photos and videos and kill time on the plane. At the same time, it becomes a carrier of dust and germs.
3. Covered with dust. Sometimes you leave your iPhone on a desk or in a drawer for days or months. When you find it again, your iPhone is covered in dust and debris. It is better to clean your iPhone speaker before use.
4. The sound becomes unclear or intermittent. Dust in the iPhone speaker may cause abnormal sound. So if the sound becomes strange, you should clean your iPhone speaker first.
5. Home button or Touch ID error. The Home button is located next to the speaker, and a dusty speaker may affect the use of the Home button, causing Touch ID to fail.
How to remove water from speakers online
Due to the fact that many people are faced with the need to clean their smartphone, the website fixmyspeakers.com has appeared. A short gif shows the result: the sound from the site pushes dust and dirt out of the speakers. The site was created based on the water draining function in Apple mobile devices (Apple Watch). Under the influence of sound waves, all foreign objects in the mobile phone body come out through the channels.
This address can be opened in any mobile phone browser. After this, on the main screen you need to press the button with the image of dust and water. It only takes a few minutes for the online function to do its job. The website helps in cases where a mobile phone has fallen into a toilet, swimming pool or other container of water. Signs of water on the speaker may include muffled sound, unclear sound, or no sound at all. When the cleaning tone sounds, an emission animation is displayed on the button.
What to do with water in speakers?
In summer, phones are more often exposed to water. Someone forgot to take it out of his shorts and jumped into the water. Or fun pampering with dousing led to the phone getting wet and stopping working. Once you find yourself in this situation, the battery of your mobile device must be removed immediately.
It is the only source of electricity, and water is known to be a good conductor of current. When we have turned off the power to the smartphone, it is time to dry it properly. In this case, you need to remove as many parts as possible so that air gets into difficult corners.
If your phone allows you to remove the battery, you can blow dry your hair. After a few minutes of plenty of warm air blowing, the device can dry out completely. But it is best to leave it in a dry, warm place for a day so that all the moisture evaporates. It is not recommended to use the hairdryer unless the battery is removed from the case. Since moisture can move with the air flow to another place, where it will cover the elements of the microcircuit and the phone can be replaced with a new one.
How it works?
All of the methods below use a specific frequency of sound to push water out of your iPhone's speaker grilles. The principle of operation is similar to the official water ejection function on the Apple Watch. Feel free to use any method you like.
Before you start:
- Be sure to wipe your iPhone (if you recently dropped it in a pool or splashed it with water) with a soft, dry cloth.
- If you spill anything other than water (tea, coffee, juice, wine, etc.), rinse the affected area with fresh water. Make sure the water pressure at the tap is not too high.
- Make sure there is no Lightning cable, headphones, or other accessories connected.
- Do not connect a wet iPhone to a charger. Forget about charging for the next 5 hours!
- Do not open the SIM tray of a wet iPhone.
- Make sure you don't put anything inside the Lightning connector or tiny speaker grilles to prevent water from drying out inside.
How to protect your speaker and microphone from dust and dirt
To prevent dirt from accumulating, follow these tips:
- Never leave your phone in a damp environment, especially in the bathroom. Moisture makes dirt hard and sticky. It can also damage device components.
- Make it a habit to regularly wipe the surface of your smartphone with a lint-free cloth or napkin.
- Buy a quality iPhone case designed to protect the speaker from dust.
- Check your phone regularly. The check prevents the formation of a large layer of dirt.
Play this sound to remove water
There are different ways to remove water from your phone speakers. These include improvised means, mobile applications and ultrasound, which is capable of displacing liquid with high-frequency waves. The flow of sound waves represents more powerful energy than the normal low-frequency sound heard by the human ear.
The YouTube video service has videos that you can play on your mobile phone for cleaning. Follow the following links and press the Play button on your phone.
This sound must be turned on and the smartphone left until the video ends. If moisture or dust particles appear on the case, remove them with a cotton swab. Cleaning methods can be combined with those that will also be described below. Sounds can also be found online as MP3 tracks.
Their impact can be as effective as the videos provided. It is necessary to clean not only when necessary, but also as a preventive measure.
This is interesting: it’s hard to hear the person you’re talking to on a Xiaomi phone.
