8 Tips to Increase Data Speed on iPhone in iOS 13

Messengers, streaming services, social networks and watching videos on the phone - all these are standard “scenarios” for almost any smartphone owner. And for all this you need a stable Internet connection. At the same time with good speed. And sometimes the latter is not enough. However, as practice shows, this is not always due to a poor signal from the cellular operator. Therefore, users can independently influence the connection speed.

Background downloads, software errors, etc. can negatively affect the speed of mobile Internet. And users can handle all this on their own. In order to increase the speed of your mobile Internet you need to:

Speed check

Before complaining about Megafon’s slow Internet, you need to check its speed. For this purpose, a special website was created for Megafon subscribers - speed.megafoncenter.ru. Just follow this link and click on the “Begin Test” button. Testing time is 30 seconds. The result consists of 3 indicators:

download speed;
unloading speed;
ping.

If the figures given are close to the indicators below, then there is no need to speed up the Internet. So, the numbers you need to follow are:

3G – 7.5 megabit/s;
3.5G – up to 14 megabit/s;
4G – from 20 to 450 megabit/s.

Stay on 4G

Whenever the 4G connection becomes unstable and the signal level drops below a certain threshold, the station switches to 3G mode to ensure stability. But there is a trick that will allow the smartphone to connect to the 4G network earlier than usual and stay in this mode longer.

Note: This procedure works regardless of the operator and does not cause damage to the device, but problems may appear (XDA is to blame). Here's how to do it:

Dial ##DATA# and choose edit mode. That's ##3282#, for those rather new.
Now choose the WiMAX menu and tweak the following settings, as stated:
WiMAX_Exit_CINR(dB) – this value defines the threshold for a phone to drop an active connection. Change the number to 1 and if problems appear, switch it back to 2.
WiMAX_Exit_Delay(s) – this number defines the time that CINR must stay activated, before the connection is dropped. So, in order to get by random drops, increase this to 5, or whatever you like. Not too high, we recommend.

Leave your comment!

Tags:

3g
4g
lte
speed

Measuring connection speed

What to do if the Internet stops working on your iPhone

This operation can be performed using specialized software. As an example, let's take Speedtest, which can be easily downloaded from the official AppStore. This service is also available as a web page https://www.speedtest.net. The instructions are quite simple:

launch an application or open a web resource;
click on the “Press” button;
wait for the scripts to finish running and evaluate the indicators, which for comfortable operation should be at least 10 Mbit/sec.

Disable auto-downloading of applications, books and updates

iOS has long had a mechanism that allows you to download content from Apple stores in the background. The option is quite convenient. With its help, an application downloaded on one device may soon appear on another gadget linked to the same Apple ID. Similarly, the mechanism works with books, music, etc.

However, automatic downloads may slow down your connection speed. To disable this feature you need to:

Go to Settings – iTunes Store and App Store

And turn off the toggle switches in the Automatic downloads item.

Possible reasons for poor 3G or LTE performance

There are a number of reasons why a 3G or LTE connection may be slower than it is capable of. The most common reason for reduced Internet speed on these protocols is increased load on the provider’s servers.

Overload occurs due to a large number of user connections to the communication channel. At peak moments of load, the network slows down, data packets take a very long time to be received and sent, and some information may be lost. For users, this results in visible consequences: browser pages take a long time to load, images and videos may not be displayed, the system takes a long time to respond to actions and button presses.

Peak downloads occur when more users connect to the network. This happens in the morning and evening hours, when the bulk of Internet guests have not yet gone to or returned from work. Speed also drops on weekends.

Clients of providers cannot influence the reduction in speed due to equipment load in any way. At these moments, you can improve the connection through other parameters: improving the signal, clearing the memory of the iPhone operating system, cache. It is recommended to close unnecessary applications and browser tabs. You can choose a higher speed tariff or options with increased network speed in the evenings and weekends.

Ways to increase speed on iPhone

There are several methods to increase Internet speed on iPhone:

Reboot the device. As mentioned above, minor errors gradually accumulate in any system, which over time lead to slower processes and productivity. Rebooting the iPhone resets all processes in the OS, these small errors are eliminated. The method is suitable if there are no significant software problems on the phone.
Disable downloads and automatic updates. Programs do not choose the time to update or download files. Perhaps in a specific situation, when the user needed high speed, the system begins to update or download files.
Change connection type. Despite the constant development of mobile networks, they work worse than Wi-Fi, which is distributed from a router. If possible, it is better to connect to wireless Internet. This will speed up the connection and save paid traffic.
Check the tariff and personal account. You can view the connection details in the agreement with the provider or in your personal account. If you run out of traffic, you can buy additional megabytes. If the tariff speed is low, it is better to choose a more expensive option.
Find out from the provider whether there were any technical problems with their equipment. You need to call technical support, the operator will tell you if there is any work being done on the line and if everything is in order. If yes, all you have to do is wait for the connection to be restored.
Change the router password. Often neighbors guess Wi-Fi passwords and use them without asking the owners of the router. Additional users on the channel also take advantage of the Internet, which causes its performance to slow down. It is recommended to reboot the router, then change the Internet password.
Change the position of the device. A large distance to the router or obstacles when connecting to the mobile Internet. You need to raise your smartphone higher, get closer to the source of communication. On a mobile connection, it is recommended to take the smartphone outside or bring it closer to the window.

If nothing helps and the provider is not at fault, it is recommended to contact a service center. Perhaps the problem lies in the network card or other iPhone spare parts.

If you use a router, you can call a technician from your provider. He will examine the device and diagnose it, examine and correct the settings.

How to make the Internet on iPhone work faster

With default settings, every iPhone, and any other smartphone in principle, uses the standard DNS servers of the Internet provider or cellular operator. All Internet traffic received or sent by the mobile device is conducted through these servers. Internet speed directly depends on the speed of the DNS server.

The secret to speeding up the Internet on iPhone is to use a high-speed DNS server that is different from the provider's server. Such servers are offered by various leading companies, for example, Google. However, the fastest DNS server publicly available for use was created by the famous company CloudFlare.

In order to activate a fast DNS server on your iPhone and speed up the Internet, you do not need to go into the settings and enter IP addresses and port addresses that are scary for ordinary users. All you need to do is use a special free

an application for the iPhone, which turns on an alternative DNS server, starting to route traffic from the device through it.

This application is called 1.1.1.1: Faster Internet and it is available for download from the App Store completely free of charge, there are no in-app purchases

. In the application itself, you just need to press the switch, which will connect the iPhone to the high-speed DNS server 1.1.1.1. The switch is really huge - don't miss it.

This simple action allows you to speed up the Internet on your iPhone by 30-50%. You can check the acceleration either with specialized testers or simply visually - sites will begin to open much faster.

Isn't this dangerous? First of all, it is important to note that the application is used by tens of thousands of users around the world. A similar DNS server is available for use on a computer, bringing the total user base to several hundred thousand.

Moreover, using a DNS server 1.1.1.1, on the contrary, makes your Internet movements more secure. In particular, contextual advertising stops being displayed - a very nice bonus. By the way, some iPhone owners use the CloudFlare application specifically for additional ad blocking.

❤ Did you like the article? Like and subscribe! More useful tips, iPhone secrets and the latest news from the world of Apple await you!

Battery wear

It often happens that such energy consumption is simply caused by frequent use of the battery. Appel lithium polymer batteries can withstand about 500 runs (cycles) without losing their original capacity. Further, after this figure, the battery capacity gradually decreases and the phone discharges faster and faster.

You can find out how your iPhone battery is worn out by using special programs. For example, the Mac program Coconut Battery is used, which provides data about the batteries of iOS gadgets. For Windows, you will see cycles by using iBackupBot. If the runs have long since passed the 500 limit, you need to urgently contact a specialist to replace the battery.

Why there is no MTS connection - reasons

If you are starting to get very annoyed by periodic failures of cellular communication and you want to know why there is no MTS connection, read on. First, we will try to find out why you have this problem, and whether it occurs for another cellular operator.

There may be no MTS connection for a reason

Problems in the subscriber's phone itself;
Operator network load;
Disgusting weather conditions;
Technical problems on the tower or operator’s equipment;
Subscriber location.

There may be no connection for any of the reasons listed above. Let's try to find out what is relevant specifically in our case and decide on further steps.

If the weather outside is currently very bad

For example, rain, heavy snow and wind, it is likely that the reason for the lack of communication lies precisely in this. How can you correct the situation? In this case, this is not possible, since you will not be able to influence the weather conditions.

What to do if the cellular operator’s network is heavily loaded

Here it is worth referring to the terms of the contract you have concluded for the provision of services. Typically, the operator marks a point where he can limit both Internet speed and communication availability if his network in your region is very overloaded. This usually happens on holidays, when everyone calls each other and congratulates. Also, in such cases, it is also not possible to dial customer support. Therefore, you just have to wait patiently until the situation normalizes on its own.

If you are in a place remote from populated areas

You should pay attention to the network availability indicator. It may happen that the reason for the lack of connection lies in your location. The operator’s network simply does not cover your area with sufficient quality

In this case, you should choose an operator who has towers in close proximity to your location. Text of the 3rd section

It’s just that the operator’s network does not cover your area with sufficient quality. In this case, you should choose an operator who has towers in close proximity to your location. Text of the 3rd section

Engineering works

There is also the problem of technical work

conducted by the technical service of the telecom operator in your area. You will also not be able to influence it, however, in this case, if there is no connection, you will have the opportunity to call the customer technical support service and check the deadline for completing the technical work.

Attention: The operator is obliged to notify its subscribers in advance about the carrying out of technical work. However, an unplanned failure may have occurred and the notification did not reach you. In this case, we recommend going to the MTS website and reading the notices and information available there.

In this case, we recommend that you go to the MTS website and read the notices and information available there.

In other cases

If none of the above problems apply to your case, then most likely there is no MTS connection not due to the operator’s fault, but because your phone is broken. You need to check whether the SIM card is installed correctly, reboot the operating system on your mobile phone, and reset the settings to factory settings. If in this case no changes have occurred, you should contact a mobile phone repair service in your city.

What data transfer speed is considered normal on Android?

There are communication standards by which mobile traffic and voice calls are transmitted. This material discusses cellular communications represented by 2G, 3G and 4G LTE standards, as well as wireless Wi-Fi connections at 2.4 GHz and 5 GHz. It's worth taking a closer look at the normal speed characteristics for each of these standards:

2G. Quite an old standard. The average speed should reach 120 kilobits per second, and the maximum is 240. Currently it is used for voice transmission, that is, calls.
3G. A newer standard that provides a good and stable network connection. Its maximum speed is 42 megabits per second, and average normal values are around 6 megabits per second.
4G LTE. At the moment, the standard provides the highest quality Internet access. Maximum speeds reach 150 megabits per second, and the average is 20 megabits per second. This is quite enough to watch streaming videos in high quality.
Wi-Fi. As for wireless Wi-Fi networks, the speeds in the 2.4 and 5 GHz bands are different. The performance in the 5 GHz band is significantly higher than in its predecessor, but the range of such a network will be significantly lower. Of course, the results depend on the selected home Internet tariff plan.

The difference between 2.4 and 5 GHz is quite significant

How to check if an iPhone is slow?

You can view your iPhone's

and find out if it should be replaced.
Go to Settings > Battery and select Battery Health. your iPhone's
battery status .

Interesting materials:

How many days of discharge during implantation? How many days is a person with rotavirus infection contagious? How many days is Herpes on the body contagious? How many days does an egg live after release? How long should the lunch break be? How much should a 2 month old Jack Russell puppy eat? How much should a Labrador eat per day? How long should a refrigerator last after purchase? How much should one roll weigh? How much should a Jack Russell puppy weigh at 2 months?

How to remove restrictions on iPhone?

Preventing access to inappropriate content and age restrictions

Go to the Settings menu and select the Screen Time feature.
Click "Content and Privacy" and then "Content Restrictions."
Select settings for each feature or a setting under Allowed Store Content.

Interesting materials:

Who voiced the baby from the Barboskins? Who voiced Marty from Madagascar? Who voiced the characters in Moana? Who voiced Pikachu? Who voiced the dog? Who voiced the roles in the three heroes with the knight's move? Who voiced Shrek from Shrek in the Russian dub? Who voiced Zveropa in Ukrainian? Who sang the troubadour in Bremen? Who sang in the Bremen Town Musicians?

There is a modem in the list, but it does not function

When the MTS modem does not work, but it is in the list of devices, then diagnostics are carried out. The modem must be selected on the PC and its properties displayed. This can be done by right-clicking. Next, the diagnostic window opens and the modem polling key is pressed. As a result, testing will begin and a certain text will appear. If it is not there, then the device does not function as it should. Perhaps it has incorrect drivers or the modem cannot work with other devices. In the menu that is available, you can make another diagnosis if you press the button for additional communication parameters.

It is possible that the initialization string was not written correctly, as a result of which the device is not able to operate normally. It should ideally be empty if the connection is made via MTS Connect.

Mobile Internet

First, let's figure out why mobile Internet doesn't work well on iPhone. If you configured it correctly, then no problems should arise. However, sometimes the speed decreases to a level where the browser constantly displays error messages related to the inability to access sites.

In the case of mobile Internet, the culprit may be problems on the side of the telecom operator. Therefore, before taking any action, make sure that you are the only one experiencing the problem.

If other subscribers of the cellular operator also complain about the quality of the connection, then you can wait a little: perhaps the provider will soon fix the problem or at least explain the reasons for its occurrence.

The strength of a mobile signal can be affected by various factors: from the distance to the nearest tower to weather conditions. If you use 4G, then be prepared for the fact that the corresponding network coverage is not available everywhere. In a large city, the Internet works fine, but outside of it you may need to switch back to 3G due to a weak 4G signal. To change the network type:

Open the “Cellular Data” section in settings.
Select Data Options.
Go to Voice & Data.
Switch to 3G.

Be sure to try changing the network if you are trying to understand why the Internet connection on the iPhone is so bad. This is especially true for trips outside the city, where there may not be 4G coverage.

Check Internet speed on iPhone

The need to increase Internet speed on iPhone 10 and other models can be tracked using the AIDS-TEST.rf service. It shows data in live time. Checks are free and the number of attempts is unlimited.

To use AIDS-TEST.rf you do not need to download any applications, your preferred browser is enough. Go to the iPhone Speed Test page and click Start Test. The service will independently measure the speed, select the nearest servers and display the result. To get a complete picture, it is recommended to carry out several checks at different periods of time.

What to do if there is no MTS connection

As we wrote above, the problem of lack of communication is typical for all cellular operators and is most acutely felt in small towns and villages.

What to do if there is no signal

Operators, for their part, are actively developing the direction of improving the quality of services provided and expanding the coverage area of their network. After a short amount of time, the cellular signal will be available to all subscribers in the country.

However, there is still a long wait before that. So what to do if there is no MTS cellular connection?

First, you should find out the reason for its absence, and then we recommend using our tips described above. Either wait for the operator to resolve the problem, or try to call customer support yourself, or check your cellular device for serviceability. We also recommend watching this video

A device such as a modem from MTS is made for quick access to the Internet using a computer or laptop that has a regular USB output. This device is very convenient, because it can be used anywhere, as long as there is a signal. But often modems may stop working, and there may be several reasons for this, so you should deal with each problem separately.