Those who have the latest iPhone models have noticed that there is no percentage window for the charge level. This is due to the fact that the development of a new design does not involve a charging window. The information field now takes up little space; the appearance of a new large screen has taken up all the space. As a result, the space available for displaying percentages has become smaller. Many users don’t like this, so they are trying to come up with a way to reset the charging percentage.
You can see more details about how smartphone models have changed in this video
In which iPhone models and iOS versions can you turn on the charge percentage?
The charge level icon on the iPhone is not very informative. Looking at it, it is difficult to say how much percent is left on the battery. To avoid guessing from the icon, you can display the amount of energy in the battery as a percentage. This can be done without installing applications.
Charge on iPhone
For the first time, the function of displaying charging in numbers appeared in iPhone 3GS devices. Since iOS was updated to version 3.0.1, iPhones began to be released with the function of displaying charge in numbers. To display percentages on other models, you need to go to the gadget settings and open “Battery”. It's under the "Basic" section. In the window that opens, you need to find the line “Charge in percentage” and turn the switch to the on state. Immediately after this, the battery charge percentage will appear in the status bar next to the battery icon.
Important! If you know how to set the charging percentage on your iPhone, you can always be aware of how long the device can work.
The method of turning on the charge in an iPhone as a percentage is suitable for use on any iPhone model with new versions of iOS pro, s, se. If the operating system version is old, there will be no “Battery” section in the settings. Instead, you need to select the “Basic” window and click on “Statistics”. Here you should find the “Charge percentage” switch. If it is turned on, the remaining energy can be determined in numbers.
Indicator
Thanks to this material, you will always know how long you can still use your phone autonomously. So, let’s move on directly to solving the question of how to turn on the charging percentage on an iPhone. Now we will install an indicator that will be located on the main panel, directly in front of the user’s eyes. Note that the described solution does not involve installing any additional applications, since they can slow down the device. There is no charge for using such a solution, since the function we need is initially provided by the developer.
How to enable charge percentage on iPhone XR, X, XS
What is the battery capacity of iPhone 7 and other models?
Many owners of late iPhone models do not know how to enable charging percentages on the iPhone. For them, the procedure for turning on the charge is different. The XR model is a frameless device with a notch at the top and no space on the screen to display charging. To make the necessary data visible, you should go to the “Control Center”. There you need to swipe down from the upper right corner of the screen and hold down for a while. As a result, an indicator will appear.
Charging percentage display
If you cannot find the function to display the charge percentage on the iPhone XR, you can use the search. You need to enter a query with the word “battery” or “charge”, the iPhone will automatically find the settings.
Another easy way to find out the charge on your iPhone X or XP is to ask Siri. It will answer the question about the iPhone battery status.
Important! When the power saving mode is turned on, the charging percentage will be displayed regardless of the settings.
Why was the charging percentage removed?
Of course, the main reason why you can no longer see the exact charge level is the lack of free space due to the cutout. However, fans of the apple brand have put forward their own theory. Since Apple has always put user comfort first, they may have deliberately hidden the percentage display.
It's all about psychology. Even when 49% of the battery charge remains, a person begins to get nervous - what if it doesn’t last until the end of the day. In fact, in this state the smartphone (under average loads) will work for another six to eight hours. But discomfort has already appeared. Accordingly, if digital values are not visible, a person worries less about the battery charge.
How to Check iPhone Battery Status
How much RAM does iPhone 7 and other models have?
Despite its advancement, the iPhone cannot boast of impressive battery life, so the pressing question is how to check the condition of the iPhone battery. Over time, it loses capacity and requires replacement. In this regard, many users of Apple products are interested in how to find out the condition of the iPhone battery.
The iOS system allows you to monitor battery wear. After 500 full charge cycles, the iPhone battery loses a quarter of its capacity. Applications will help you find out exactly the battery status. Battery Life allows the device owner to quickly assess the degree of wear. The application will give a rating of “excellent”, “good”, “bad”, “very bad”. In the Raw Data section you can see how many charging cycles the device can withstand.
There is an alternative application iBackupbot. To install it, you need to connect your phone to your computer and open the gadget in the Devices window. Technical information will be displayed. By clicking on “More Information”, you can find out the number of charge cycles of the CycleCount battery.
Battery check
If the application shows a negative indicator, do not sound the alarm. It is better to double-check the condition of the gadget at a service center that uses special equipment.
Yellow charger on iPhone, what does it mean?
With the release of iOS 9, iPhone owners now have access to a power saving mode. When used, the battery reduces the amount of energy consumed. The device runs a little slower and some features are disabled.
Where is the equalizer on iPhone 6 and other models?
A sign that the smartphone has switched to energy saving mode is that the charge icon turns yellow. For the indicator to change color, you need to:
- Go to settings.
- Select the “Battery” section.
- Drag the toggle switch to the “On” position.
Although the performance of the smartphone will drop, it will be able to work without a charger for at least 3 hours. The function is convenient for users who want to extend the operating time of the gadget.
Important! An easy way to turn on power saving mode is to ask Siri.
The device itself will offer to start energy saving when the battery level drops to 20%. The iPhone will exit the mode when the charge reaches 80%. If you set the mode manually, it will remain on even with a full battery.
To disable power saving yourself, you need to go to “Settings”, select “Battery” and switch Low Power Mode to inactive state. The charge indicator will turn yellow. On iOS 11 devices, you can add Low Power Mode to Control Center.
How to Extend iPhone Battery Life
Under normal conditions, the gadget annually loses from 15 to 20, with intensive use up to 50% of its capacity. Sometimes your iPhone battery wears out sooner. The reason is not only the manufacturer’s oversight, but also non-compliance with operating rules.
The first thing you need to do to improve battery performance is check for a software update. The latest firmware includes energy-saving technologies to increase service life.
To maintain battery health, you should:
- Charge your iPhone less often in the car.
- Do not use non-original accessories.
- “Run” the battery (discharge and charge to maximum).
- Protect the device from moisture and mechanical impact.
- Charge iPhone without a case. Some types of accessories cause the device to overheat, which leads to a decrease in battery capacity.
The ideal temperature for using an iPhone is from +16 to +22 degrees. The most dangerous operating mode is when the air temperature is above +35. In this case, the device will stop turning on.
Battery usage rules
Note! You should not store the gadget in a hot room. If the temperature exceeds the recommended values, the maximum charge level will be reduced to 80%.
What to do if the battery status is not displayed on iPhone
Sometimes it is impossible to assess the condition of the battery - no data is displayed on the screen. If there are dashes on the screen where the indicator is usually located, you need to restore the statistics. An easy way to do this is to charge your device. If it doesn't help, you should try:
- Restore firmware. To do this, you need to put the device into DFU state. There is no need to restore the backup; you need to see if the data is shown on a “clean” device.
- Resetting settings and content helps to get the indicator back.
- Update iOS. New software versions take into account errors from previous updates.
- Download beta software. It is better than the one installed on the iPhone; it eliminates the bugs of previous versions.
A common reason for lack of battery status information is battery replacement. If a non-original part was installed, the system may not accept it. In this case, restoring the firmware and updating iOS will help.
If all else fails, it makes sense to replace the battery. But there is no guarantee that the charging status will be displayed after this.
Is it possible to display the charge level on the main screen?
As it becomes clear from the previous sections, information about the battery charge can be displayed on the main screen only in iPhones up to version 8 inclusive. In newer flagships. Thanks to the efforts of the developers, there is simply no space left in the corners of the screen of all these models. In their opinion, an animated icon is more than enough. However, not all users agree with them.
The company received a ton of criticism for this small change. Now you have to make several additional clicks, which also consumes the battery, the status of which is obsessively monitored by iPhone users.
Owners of new models can breathe easier - Apple has increased the battery capacity, so it lasts even with active use. Numerous tests do not provide unambiguous data, because everything is very individual. Session length is affected by frequency of use and specific applications. iPhone X and iPhone XS are capable of maintaining battery life for a long time, even after several hundred recharge cycles.
The most stable is the iPhone 10. Thanks to the dual battery configuration, the smartphone demonstrates the longest operating period without recharging. According to tests, it allows you to listen to music on the Internet for 60 hours and actively surf for at least 12 hours. If you use the smartphone for voice calls, the battery will last for 21 hours. In this case, the device is half charged in less than half an hour. Provided that you are not using the Internet at this time.
How to increase the maximum battery capacity on an iPhone
iPhone owners know that their device lasts less than a day without recharging. Helps increase battery capacity:
- Setting the iPhone charge percentage. This makes it easier to control the energy charge. Seeing that the battery is “zero”, you need to stop using applications that consume energy.
- Reduces screen brightness. It is optimal when the backlight is at 50%. This recommendation is made by Apple, claiming that it is an easy way to increase battery capacity. Adjust the indicator in “Settings”, “Display and brightness”. There you need to turn off the “Auto-Brightness” mode (automatically changing brightness in different lighting conditions).
- Deactivation of services. You can save 30-40% battery charge if you remember to turn off wireless connections when leaving home. To do this, go to the quick access menu and turn off Bluetooth and Wi-Fi.
- Disable content updates. If the constant news that the system displays on the screen is not needed, you can deactivate it. You need to go to “Settings”, then to “Content Update”. For this purpose, you can also disable Push notifications that appear in the background. To do this, you will need to select “Mail, Address, Calendars” in “Settings”. Opposite “Loading data” you need to set Push to inactive state.
- Disable service notifications. For maximum battery performance, it is useful to go to “Settings”, select “Notifications” and leave a few desired options. The signal format can also be changed. It is enough to change the sound notification and icon display to save battery power.
By listening to these tips, you can easily extend the battery life of your iPhone. This is facilitated by the display of battery charge as a percentage on the device screen.
Battery life
Now you know how to charge your iPhone by percentage, but every user also wants his mobile device to last as long as possible. Here are some tips to help you increase your iPhone's battery life.
- First of all, let's turn on the mode called "Airplane". The fact is that when this option is activated, the iPhone stops exchanging background data, so the battery drains more slowly.
- Activate the “Do not disturb” function. Airplane mode has one significant drawback. When activated, outgoing or incoming calls are not possible. This situation makes it difficult to operate the device. If you need to take a certain important call and save battery power, the Do Not Disturb feature is suitable.
- Turn off This solution is incredibly beautiful and equally insatiable in relation to the battery. In order to save battery power, temporarily disabling parallax is also suitable.
- Set up automatic screen lock. Don't forget to turn off the display when you're done using your iPhone. This can be done using a special side key or by setting the screen to auto-lock after a certain period of time.
So we figured out how to charge your iPhone as a percentage and use it up more slowly.
Let's look at the settings that will tell you how to charge the iPhone X as a percentage using standard iOS functionality.
