Now I will not describe the pros and cons of glass, list the pros and cons. This has been discussed here so many times already that nothing new can be said.
The main thing is that if you periodically glue protective glass on your iPhone (and any other smartphone too), then this three-kopeck liquid is the best assistant, much more useful than some napkins or even direct hands.
I first heard about it a few years ago, saw it on sale a couple of times, but now I finally ordered it on AliExpress. And, of course, I checked it in action.
Result? Fire!
Additional tips and tricks
To apply liquid glass to your smartphone screen successfully, you should adhere to certain recommendations:
Liquid from the bottle should be applied in small drops
It is recommended to rub it well into the surface of the device. After applying the substance, it is recommended to carefully warm up the resulting film. A stream of warm air from a regular hairdryer is suitable for this. Before starting work with the composition, it is worth preparing the place
It is recommended to remove all unnecessary items. If the substance gets on skin or fabric, it is recommended to take immediate action. The skin should be washed with plenty of water, and the clothes should be washed. The fewer nanoparticles that get on the gloves, the more accurate the contact with the smartphone will be. When using the substance on gloves, they should be placed on a flat surface. In this case, it is recommended to apply the liquid in small portions until it is completely absorbed.
Liquid glass is considered an innovative product that is used to cover the screen of a smartphone. This tool has many advantages that make it easier to work with the device and provide it with reliable protection. To achieve good results in applying the substance, you should strictly follow the instructions.
Share link:
Where did JS come from and what advantages and disadvantages does it really have?
Initially, many users learned about liquid glass after the MWC-2017 exhibition, in which German scientists showed the whole world their invention - ProtectPax. According to the creators, this composition can increase the strength of the device by as much as 6 times! To prove it, they took out the phone and hit it with a hammer. Interestingly, the phone was not actually damaged.
The presentation turned out to be quite impressive, so this innovation received support from various sponsors. But when the emulsion was released, the factories replaced the flashy advertising headlines with more modest ones. People who repeated the effect with a hammer at home were very disappointed in this liquid.
The percentage of protection for such people decreased by 99%, that is, a hundred times! Interestingly, the liquid was not removed from the market, it was firmly entrenched in it. If you look on YouTube, you can find videos that show that the JS is defenseless not only against a hammer, but also against scissors.
Truth or myth?
Which of the claims made by liquid protection manufacturers is real and which is a myth? Among the properties attributed to such a product are:
- effective protection against mechanical damage;
- improvement of tactile sensations;
- getting rid of minor scratches;
- moisture resistance.
Which of these properties are real and which are fake? It should be immediately emphasized that there are a huge number of varieties of tech nano - liquid protection. Manufacturers position the product as the best on the market, holding promotions and advertising protection even from hammer blows on the display. However, the reality is different, and the properties attributed to liquid are a myth and an advertising gimmick.
Based on numerous tests, only a few properties turned out to be true:
- Smoother surface – by applying a thin layer of coating from the tube, scratches will not disappear from the screen, but the surface will be smoother and more pleasant to the touch.
- Less scattering of glass - even if you receive damage, you will not “lose” half of the glass or fragments at the moment of impact. Also, the functionality of even a broken sensor will be maintained on the phones for the time necessary to save data or urgent calls.
- Moisture protection acts on already protected glass.
Step-by-step instructions for sticking glass
First, the phone is removed from the case and turned off. Then the old protective coating or glass is removed from the surface.
Pasting consists of the following steps:
Attention! Protective glass is sensitive to bending. Therefore, when gluing it, you cannot press hard on it, otherwise a crack or even a break will appear.
Glass is often produced for specific smartphone models, less often - universal, designed for a specific diagonal display. But in the first and second cases, you must first try it on and determine exactly how the protective coating should be positioned on the smartphone.
If the phone on which the protective coating is glued has just been purchased, then it is not necessary to clean the display surface. Simply remove the factory protective film from the screen.
Level placement of glass
Not everyone succeeds in gluing glass evenly the first time. Regular stationery tape will help you place it correctly. Then do this:
Once the glass is fixed in the correct position, you can clean the display. After gluing as described above, the tape is removed.
Note! Some glasses also come with adhesive fasteners for fixing using this technology, so no tape is required.
Removing dust particles
If there is a speck between the surfaces, an air bubble will form around it. Smoothing it with microfiber alone will not remove it. But it is still possible to improve the situation.
Auxiliary
To make gluing the protective glass more comfortable, you can find a gel for filling air bubbles on sale. They often form along the edge.
Such products are available in two forms - in a bag or in a pipette. The liquid is not afraid of temperature changes, so even in frost it will not freeze. One sachet is enough for several uses.
Use the gels as follows:
The thinner the applied layer of bonding gel, the better the result.
This is interesting! Craftsmen advise using improvised means instead of gel - for example, glycerin. Use it in the same way as the gel.
Rule No. 4. Choose wisely
In order not to fall for the tricks of unscrupulous sellers, when purchasing, also pay attention to the following details:
Absolutely all protective glass is manufactured for a specific phone model or line of smartphones, if the screen parameters match. At the same time, check the placement of holes for the camera, speakers, etc. It is prohibited to cut, sharpen or saw out this accessory!
- The strength of the glass must be indicated on the packaging.
- When choosing thickness, consider the application conditions. For everyday living conditions, the average thickness is quite suitable. For extreme conditions, you should choose thicker glass or more expensive options.
- Glossiness or dullness have no effect on the degree of protection. In this case, you choose a coating that is convenient for you.
And, of course, additional services. Almost all chain stores, when purchasing an accessory, try to offer the service of gluing protective glass. The cost everywhere varies between 200-600 rubles, depending on the cost of the smartphone itself. If you do the math, it turns out to be a decent amount per year, since on average glass needs to be replaced 4 to 6 times a year. Installing protective glass on your phone yourself is not so difficult, and you can save up to 5 thousand rubles a year.
How to prepare for surgery
Before installing the glass, a person needs to clean the work area. It should be a table with a smooth surface, free of dust particles and other dirt. The room itself where the installation is planned must also be clean.
If millions of dust particles are flying in the air, they can easily ruin the installation process by getting under the protective glass. Of course, no one wants to face such difficulties during the process, so pay attention to all recommendations.
To avoid leaving fingerprints on the new glass, perform all operations wearing rubber gloves.
How is it different from hydrogel film?
The protective hydrogel coating has certain features. The film is made of a polymer material that helps absorb and retain moisture. This product is characterized by high strength, which protects the monitor screen from scratches and abrasions.
The advantages of hydrogel film include the following:
- resistance to mechanical damage;
- complete transparency - thanks to this, the material does not affect the transmission of colors;
- easy to fix on the device screen;
- maintaining high sensor sensitivity;
- absence of harmful components in the composition;
- protection of the surface from fingerprints;
- durability of use;
- possibility of multiple fixation;
- affordable price.
A distinctive feature of the hydrogel film is the possibility of self-healing of the surface. In addition, the material has anti-reflective characteristics. Images on the monitor can be viewed even in the open sun. At the same time, the material does not suffer from exposure to ultraviolet radiation. The film is easy to maintain. There are no fingerprints left on its surface, so you can clean the surface of the device using an ordinary napkin.
How to remove the protective film from your phone: detailed instructions
We suggest studying two types of instructions at once - a video review and information about various film removal techniques.
In the first case, you can clearly see that removing and installing a new protective film is a simple step and can easily be done at home. In the step-by-step guide, we will also learn several methods to remove and apply the screen protector after cleaning the display. The removal procedure can be roughly divided into several stages:
- Clean the display with protection. Wipe the old film with a cloth soaked in alcohol, removing debris and dust at the ends. You can wet the surface with special chemical solvents produced by manufacturers of films and gadgets, but using a regular solvent is not recommended - it will damage the touchscreen or get inside. After cleaning, it will be easier to determine where it is convenient to pick up the old protection.
- Using tools or soft-textured objects, pry up the edge of the film. If this action cannot be performed, try moistening the edge of the film with alcohol, wiping thoroughly with a napkin.
Pick up the edge, then pull in the opposite direction. Do not pull upward - this may damage the display or peel it off (a similar situation will occur when it warms up - the glue used to fix the screen will melt and it will come off). Completely remove the film from the iPhone using a plastic card and prying it across the entire width. If the screen size is too large, carry out the procedure in several stages. Before applying new protection, you must thoroughly degrease and clean the glass. Re-gluing the same film will require cleaning it with an alcohol solution. Moreover, you will need to correctly stick the protective film a second time while it is still wet - it should dry already on the screen and by squeezing out the bubbles and moisture.
Rule No. 1. What is safety glass?
It is made from tempered glass, which is pre-treated with special impregnations and chemical compounds. When compared with conventional security film, it is noticeable that a device made of glass is 2-5 times thicker, and therefore more reliable.
Layers
A high-quality protective glass for your phone consists of five different layers, each of which performs its own function:
- Silicone base. This is the first layer that ensures reliable adhesion of the glass to the smartphone display.
- Containing. If the display is damaged, the glass will not crumble into pieces, and the crack will not go far.
- Anti-glare. In sunlight or bright light, the screen remains bright and the image is clear.
- Safety. Provides reliable protection for the display from chips, abrasions and scratches.
- Oleophobic. Protects the surface from moisture and grease.
High-quality safety glass must perform several more functions in addition to safety, so when selecting, focus on a similar composition.
Varieties
There are also several types of glass, namely:
- Glossy.
- Matte.
- Private coverage.
Glossy finish is the most common. It is characterized by excellent screen brightness, without distortion, it performs protective functions perfectly and is almost invisible on the display.
Frosted protective glass tends to slightly distort the image, but its main advantage is that the image does not fade in sunlight or bright light. Therefore, if you are often outdoors or in bright rooms, it is recommended to use a matte finish.
Private coating is a special tinted type of glass that has a special feature. The fact is that the contents of the display are visible only when viewed at a right angle. If you look at the phone from the side, you will only see a black screen, but as soon as you turn the gadget towards you, the image will immediately appear. The use of such glass is important if you want to hide the contents of the screen from prying eyes. For example, in public transport, only you will see what is shown on the screen.
What is the price?
There are many options on AliExpress, but I will indicate the one that I tested.
? Protective glass filler for smartphone : 76 rubles
A cheeseburger at McDonald's costs the same money, but does more harm.
The parcel arrived in 12 days at the post office in Moscow. Free delivery.
In general, I’m pleased, I’ll definitely have this thing in reserve and use it when gluing glass. Makes the whole process easier and allows you to ignore errors. Add the sauce and it's ready.
Source
Review of popular brands
Today there are many popular brands that produce liquid glass.
CoaterPRO 9H
This coating gives the surface of the device a mirror shine. The composition helps repel water and dirt. It helps protect the display from scratches. In addition, the substance makes it easier to care for your smartphone, as it helps prevent stains from appearing on the surface. The composition contains a bottle of liquid glass, sponges, napkins, and microfiber cloths. The kit also contains a container of degreaser.
AUTO CARE Nano-Hybrid Technology
The kit includes the main composition, a degreaser, and a fixative. The set also includes microfiber napkins and cloths. These devices make coating application easier and more successful. The product copes with its functions perfectly. It makes the screen more shiny, provides protection from scratches and ultraviolet radiation. The downside of the composition is its fragility.
Sikeo Anti-scratch
Liquid glass from this manufacturer helps hide minor scratches. The product provides reliable protection against dirt and dust, and helps prevent the appearance of new scratches. It should be borne in mind that it takes a long period of time for the composition to dry.
CARPRIE
After covering the screen with this composition, it is possible to make old scratches less obvious. The product provides protection against ultraviolet radiation and chemical influences. The composition has moisture-repellent properties. The set contains a container with liquid, a sponge, and napkins.
Rising Star RS-A-CC01
This coating contains water-repellent components that make using the smartphone more convenient. The kit includes several sponges and microfiber cloths. The composition also includes a bottle of liquid glass. Before application, the substance is combined with a fixative. That's why it dries quickly.
The kit includes sponges for application and a degreaser. The substance also contains rags or microfiber cloths, which are used for final polishing of the surface.
KELOR X3
The company purchases materials for the production of goods in Japan. It was in this country that liquid glass was invented. The composition includes the main product, a degreaser and a fixative. The bottles are equipped with convenient dispensers.
AUTO CARE Nano-Hybrid Technology
This liquid glass is characterized by a special method of application. Usually the substance is applied to a napkin and then to the surface of the smartphone. When using this composition, liquid glass is sprayed through a spray bottle. It is recommended to first wipe the surface with a sponge, followed by final polishing with a microfiber cloth.
So, let's go, the first method:
- The first method is sugar syrup, yes, exactly sugar syrup
The sugar solution is made like this:
Take a teaspoon of sugar or 1 cube and dissolve it in 2-3 tablespoons of hot water.
If the glass, like mine, has only partially come off, and no debris has yet accumulated there, if a speck has gotten in, we remove it with a toothpick, carefully prying it off on one side... Then, again with the same toothpick, a fingernail, or whatever is convenient for you, we pry it off it, not too much, very carefully, you can’t bend it - it will become deformed and all you have to do is throw it away, so, pry it up and drop one or two or three drops of sugar syrup under the corner of the glass. I used a toothpick for this - I used my fingernail to pry up the glass, and with the toothpick I transferred droplets of the solution to the phone screen. You can use a syringe, but be very careful not to scratch the display itself with the needle.
Next, we press the glass and dry it so that all the water completely evaporates; a regular household hair dryer is suitable for this task. It’s not very convenient to do this alone, I did this: I turned on the hairdryer and put it on the table, and held the phone in my hands and pressed it...
If it comes off completely
First of all, we thoroughly clean the phone screen and protective glass from dust particles and other debris. The screen can be wiped with alcohol and then polished with a cloth for glasses.
The glass itself can be cleaned like this:
- Carefully seal the adhesive layer with regular tape and wash it with slightly soapy warm water.
- The second way is to take masking tape and go over the entire screen, collecting all the debris. The worst thing to clean is the adhesive base itself. You can try it with regular stationery tape, this is what it looks like:
We clean the protective glass and adhesive layer from debris
IMPORTANT!!! The glass itself is the transparent part; there is no need to clean it with tape. It can be easily cleaned with napkins or, in extreme cases, alcohol
I personally tested this option with sugar syrup and it worked great. The glass stuck tightly and held on perfectly... But not for long... And the reason for this is the bumper or cover, whichever is more convenient for you. It was because of the bumper that the first time it came off, at the top, and after gluing it with sugar syrup, it also came off after about a week….
But the option is working. Give it a try.
What is
Liquid glass is a unique protective coating that includes titanium nanofibers. Manufacturers claim that this composition can be used for all types of screens. It prevents cracks, scuffs and scratches from appearing on your smartphone screen. The advantage of the composition is its moisture-repellent characteristics. Using the substance helps keep the screen shiny throughout the year.
The range of such products includes not only a liquid that helps create a protective film on the phone, but also a special impregnation made from nanoparticles.
The standard fluid kit contains the following:
- 2 types of napkins. The microfiber product removes dust, stains and dirt. The wet wipe is specially impregnated or contains a degreasing solution.
- Tube with solution. The kit often includes a napkin that is already saturated with the substance.
- Instructions. It is usually given in Chinese or English. In any case, the information is intuitive because it contains step-by-step pictures.
There is also a type of liquid that contains the same components. In addition, the composition often contains a brush for application. The products often come with a bottle with a dropper that allows you to dispense liquid.
Case Place branded packaging
And finally, we have finally finished developing branded packaging for protective glass!
Some facts about our cool packaging:
Case Place set: protective glass, wet wipe, lint-free wipe, dust removal sticker
The kit includes a gluing kit: wet and lint-free wipes, a sticker for dust removal.
All this will help you easily and beautifully stick on our protective glass!
Source
Special cases
If removing the film on a phone requires only care so as not to tear off the sensor along with it, then in the case of protective glass, more complex problems may arise. In particular, it will be necessary to remove the screen, taking into account the degree of its damage, configuration and many other conditions.
How to remove a broken screen protector from a phone
If the protective glass is not just cracked or covered with cobwebs, but the damage is much deeper, you will need to carry out the removal procedure in stages. Remove the largest fragments first, and then remove small particles. For removal, use only soft materials - a scraper, plastic card or similar objects. Do not drag glass shards across the display as this may cause scratches.
