How to get a SIM card from a Xiaomi Redmi

How to insert a SIM card into Xiaomi - this question is asked by many users who have become owners of a new Xiaomi smartphone. Maybe it's Redmi 4 or Redmi 5, or even Mi A1 or Mi 6. Of course, it could be any other option from the huge list of devices from this manufacturer from the Middle Kingdom. All that remains is to congratulate! Great choice! Now you just need to turn on the device and insert a SIM card into it. Most users will find this operation extremely easy. But there are also those for whom the process of SIM implementation will become a real problem.

Therefore, we need to consider this process step by step. After reading the guide, even a beginner can easily insert a SIM into a personal Xiaomi device.

Mixed dual tray, Nano SIM card, Micro SDi card

Using a paperclip to remove

Manufacturers have taken care of customers and, in addition to phones, produce paper clips for extraction. They should be with every smartphone that has a unibody body.

Each box containing a Xiaomi smartphone comes with a special paperclip, which is the key to the slot. It is made of thin metal wire and resembles an oval or circle with a long tail.

Tray release clip

When buying a smartphone in a specialized store, the seller is obliged to show how to get a SIM card slot in Xiaomi.

The tray is usually located on the left side of the phone, but in some models it may be on the right. In appearance, the tray resembles a small oval with a hole next to it.

How to open a memory card slot on Xiaomi?

Depending on the model, it is possible to install a memory card either in a separate slot (for example, for Xiaomi Redmi Note 5A) or in a compartment for microSIM. In the first case, the user will have the opportunity to simultaneously use two SIM cards and a separate memory card, and in the second, he will have to sacrifice one of the SIM cards for the sake of expanding the memory capacity.

The microSD installation process is similar to the procedure described above. The main thing is to insert it into the hybrid slot. The manufacturer made sure that the slots were not confused by putting the appropriate inscriptions on them.

On the Internet you can find tips on gluing two cards together, which allows you to use both the drive and two SIM cards at the same time. However, such methods are very unsafe for Xiaomi phones, since there is a high probability of damage to the internal contacts of the reader or damage to the tray itself.

If you don’t know how to open a SIM card on Xiaomi if you lose a special paper clip, there is an excellent solution: use a regular paper clip. The main thing is to straighten one of its ends.

How to open the SIM card tray in Xiaomi using an eject clip

Despite not understanding how to remove the Xiaomi SIM card slot for the first time, there is nothing complicated in the procedure. Carefully insert the tail of the paper clip into the hole.

There is no need to move from side to side, nor do you need to pick.

You need to carefully insert the paperclip until it clicks. This tail should be perpendicular to the side surface of the phone.

After a click is heard, the SIM card plate will pop out a short distance away. You need to pull it towards yourself with your fingers until it is fully extended.

Note! The plate is very thin and extends all the way. She pulls herself completely out of the phone. You can’t lose it, since it’s not easy to buy such a part.

Required tools for disassembly

To open the phone cover yourself, you should prepare special tools. Carefully, without damage or scratches, you can carry out the manipulation using such things as:

Spatula for dismantling phones;
If you don’t have one, you can take a plastic card;
A paperclip to remove the SIM card;
Screwdriver or tweezers;
New elements.

The latter must be purchased in advance from a trusted seller. The quality of the parts that need to be replaced must be decent. Otherwise, disassembling the phone will not bring the desired result.

Installing a second SIM or memory card

Some models, such as Redmi 6A or Xiaomi Redmi Note 5A, have a separate slot for a memory card. That is, they have three slots. Two for SIM cards and one for a memory card.

But there are Xiaomi smartphones for which there is one slot for a micro SIM card and a memory card. For example, Xiaomi Mi A2 Lite. Users of such phones need to choose: either they use two SIM cards, or they have enough memory.

Inserting a Memory Card

Installing a second SIM card or memory card is no different from installing the first. There are models in which all three slots are on one plate.

There are those that have two plates installed. The indentations for all three cards are different, so it is difficult to confuse them, but the manufacturer carefully placed the appropriate inscriptions.

In the same way as in the first case, you need to take out the tray, insert the second SIM card or memory card into the desired recess and insert it back until it clicks.

Algorithm of actions

The sequence is as follows:

Find a paperclip in the smartphone box. This is a metal wire, bent into a rectangle on one side for convenience. Usually the paperclip is located in a cardboard insert, in the same place as the instructions, warranty card and other documentation.
On the side of the device, on the left or right, there is a SIM card tray. You need to open it by inserting a paperclip into the small hole and pressing. The location and design of the slots may vary between models.

in the Xiaomi Redmi 4X model, the opening hole is built into the tray lid;
in Xiaomi Redmi 5A and Xiaomi Mi A1, the slots do not differ from the model described above, but the lock hole is moved to the side, it is located next to the tray;
In Xiaomi Note 5A, the slots are not combined, but separate - two for SIM cards, one for a memory card.
Read also: Review of the Apple iPad mini 5 tablet - neat, compact and angry

We press on the paperclip, a click is heard, and the metal plate moves out. Now you can pick it up with your fingers and finally pull it out.
Place the SIM in the recess. One of the corners of the connector is always beveled to the shape of the SIM card, so you can’t make a mistake. The metal contacts of the SIM card must be visible.
Reinsert the tray. On some models you can find the inscription Face to screen; when installed, the signed side of the tray faces towards the display. Press until it clicks.

Precautionary measures

It is important to understand that the “sandwich” has some risk. The smartphone plate is not designed for such use and may not read the memory card and SIM card.

If glue gets on the chip or contacts of the SD drive, it needs to be cleaned off.

If for some reason the tray is stuck and does not open, it must be taken to service. It is impossible to get it yourself.

Method No. 1. Using a special key

As we said earlier, every mobile device that has a sliding SIM card tray comes with a special key in the box.

Thus, using a special key, you can open the slot for installing or removing a SIM card or MicroSD memory card.

Insert the special key into the hole located in the SIM card tray area.

How to insert a SIM card into Redmi Note 5?

Answers to the question:

Turn off the phone's power.
Carefully insert the paperclip key into the small hole located on the left side of the device.
Lightly press the key into the hole at a right angle.
Remove the nanoSIM and microSD card tray.

Interesting materials:

How to register a developer account on Google Play? How to register a Google account for a child? How to register an account in telegram? How to register a business account on WhatsApp? How to register multiple Gmail accounts? How to register a new Google account? How to register a new account? How to create an account in contact? How to create an account on Twitter? How to create a Google account for a child?

Method number 2. Using a sewing machine needle

The sewing needle has a similar structure of special keys. As a result, it is universal for removing the SIM card tray on any mobile device. In addition, a sewing needle is present in almost every house or apartment where there is a woman!

Take a thin needle, insert it into the hole that is located in the SIM card tray area, and then simply press down to remove the tray.

How to open the SIM card drawer of your XIAOMI Redmi 9?

To open the compartment where the SIM card is located, you will need a paperclip or small metal object. On one side of your Android phone you may find a small box next to which you will have a small hole. You need to insert a paper clip into this hole and press hard enough. The SIM and SD card drawer will open. Carefully remove the box from its slot.

Method No. 3. Using a paper clip

There is a paper clip in every home. Therefore, if you haven’t found a sewing machine needle, you will definitely find a paper clip! It's important to note that a paperclip can also open the SIM card tray on any phone, including iPhone, Samsung, and LG.

Take a paper clip, insert it into the hole that is located in the SIM card tray area, and then simply press down to remove the tray.

Tray still won't come out

The second and third methods should be used only if the tray does not come out after applying a paper clip to it. In this case, try pressing the tray lightly with your finger, and then pushing it out again with a paper clip with a little more force.

This problem can occur if the SIM card gets caught on the phone body. This can even lead to bad consequences, such as damaging the tray or even touching the contacts of the smartphone.

Important! Never insert needles or any VERY sharp objects into the hole. If you do not have an original paper clip, you can use the blunt side of a needle, an earring, or a paper clip.

Method number 4. Using Slat Nails

Slat nails work great for removing SIM card trays. Undoubtedly, finding such nails is not an easy task. Nevertheless, this method has its place and can be used.

We have shared with you the best ways to open the SIM card tray on any device. However, we offer you to watch a video on how to open the SIM card tray.

Therefore, we need to consider this process step by step. After reading the guide, even a beginner can easily insert a SIM into a personal Xiaomi device.

How to open a Xiaomi phone?

Having prepared the necessary elements, you can start opening the smartphone. The sequence of actions on how to open the back cover of xiaomi looks like this:

You get a SIM card tray. No need to leave it. It will interfere with the process of removing the cover.
The latches open around the perimeter of the gadget. The important thing here is to make an effort, but to do it carefully. It is necessary to act gradually from one corner of the phone to the next.
Carefully and slowly remove the back cover of the smartphone. A cable will appear, which is connected with the back surface to the touchscreen. The train is carefully removed. This will give you access to the front panel with the video camera.

After removing the back cover, the user will see the chip and cameras. The battery is installed underneath them. If necessary, it can be replaced. This must be done using a screwdriver. The elements located inside are secured with bolts.

After unscrewing the bolts, you need to open the protective top panel. The chip will be presented to your attention. It is not recommended to touch it. You should not make independent changes to the configuration.

Using a paperclip to remove

You should take the packaging in which the device was supplied and take a special key from it (it is called a “Paperclip”). You can find it quickly, since it is secured in a separate paper case.

The clip is supplied with every Xiaomi device, since they have a non-removable back panel. Thanks to this key, you will be able to access the SIM card slot.

If the key cannot be used for any reason, then a solid wire of suitable diameter can be used instead. Do not insert sharp needles so as not to damage the removal mechanism.

SIM cards supported by Xiaomi

The majority of the company's devices support two SIM cards simultaneously. Therefore, it will be possible to integrate both Nano-SIM and Micro-SIM into the device.

The device also has the ability to insert a Nano-SIM memory card, but then you can only use a memory card and a Micro-SIM.

Modders on the Internet have come up with a method to use 2 SIM cards and a memory card. The technique is called “Sandwich”. It’s not often possible to cut a Nano-SIM properly; it doesn’t always fit.

How to remove the SIM card tray

To insert a SIM card, you will first need to remove the tray. It is located on the left side of the device, and is obtained by using a paper clip supplied in the box.

Find the packaging and look inside it;

After that, remove the iron clip shown in the image below from there. Thanks to her, you will be able to open your smartphone;

Note! Be sure to turn off your device before proceeding to the next step.

Place the device on something soft to avoid scratching the display. You need to make sure that the device does not fall. Find the hole shown in the photo below. It is necessary to remove the tray;

Slowly press the paper clip, without applying excessive force, and the tray should come out;

How to open the back cover of Xiaomi?

The back cover can be removed in another way. This process is required when it becomes necessary to replace the battery of a mi gadget. The user must perform the following actions:

A paper clip prepared in advance is inserted into a special hole for the SIM card and pressed;
The tray is removed;
To prevent scratches, you should stick glass or film on the screen;
A special blade moves along the body, along the perimeter;
If one edge snaps off and the others remain closed, there is no need to jerk the lid off. You can open the device with a suction cup or scissors;
After processing the latches, you can lift the cover;
The train is lifted separately using tweezers.

This process is relevant for Xiaomi models. There may only be minor differences. Phones without a fingerprint may not have a menu cable. After this, you can begin replacing the battery.

If you use basic tools and have a certain amount of time at your disposal, you can replace the battery yourself. To achieve this goal you need to follow these steps:

The phone turns off. The SIM card slot is removed. Use a screwdriver to remove the end screws.
You need to pick up the lid with a mediator. This should be done in the place where the two halves of the housing are connected.
Using light sliding movements, you need to increase the gap between the body elements around the perimeter.
The Xiaomi cover opens and is removed.
The power cable is disconnected from the system board. To do this you need to connect the plug.
The screws are removed using a screwdriver.
The module is removed.
You need to pull both black labels on the battery. This will remove the protective film from the battery.
The battery is pryed with a sharp object and pushed out of the hidden slot.

After this, the old battery can be replaced. If you follow this guide, you can replace the charger without losing the quality of the phone itself.

Reintroducing the SIM card tray

After this, the SIM card is installed together with the tray again in the device body. Installing the card must be done carefully, since this fragile thing is very easy to break.

The tray should click. Then you need to turn on the device and wait until the inserted SIM finds the operator and becomes active. The name of the mobile provider will be displayed in the tray at the top.

The device is ready to perform work and household functions.

Attention! Some Xiaomi devices have separate slots (Redmi 4 Prime).

That is, one for placing SIM1, the second for SIM2 or a flash drive. But there are models with a mixed slot that can accommodate 1 or 2 SIM cards at once, as well as a memory card (for example, Redmi 4a, Mi 5, Redmi 5, 5 Plus and others).

Installing a second SIM or memory card

Next, you need to figure out how to insert the memory card into the device. This is not difficult to do, the only difference is that you should install a drive and a tray in conjunction with the SIM card.

MicroSD has special cutouts that prevent it from being integrated incorrectly. You need to make sure that they are completely compatible. What it looks like is shown in the image below:

After this, just like with a single card, you should install a slot in the device. It is necessary to ensure that the contents do not change position and completely fall into the desired guides.

We take out the stuck SIM card from the smartphone

Remove the SIM card from the slot of the Xiaomi Redmi 4 smartphone, what could be easier?

We recently showed a tablet where we managed to put as many as 3 cards and a HYUNDAI DVD player into the microSD slot, which became a changer at the behest of the children :)

Today we also have a non-standard situation, the owner did not deal with slots for micro and nanosim cards and, without noticing that the SIM card tray had already been removed, inserted a full-fledged SIM card from an old smartphone into the slot.
The card successfully entered the slot and upon further attempts to get it out, it fell even further. Meet the new Xiaomi Redmi 4 32Gb Gold:

In passing, I’ll note that the phone is much nicer than the previous Xiaomi Redmi 3, the screen has even thinner frames, a different resolution and colors, but the smartphone itself is still plump, and due to its square shape, it seems large.

Now we look through the slot and see a SIM card that is so close, but so far away. The problem is that modern smartphones cannot be easily disassembled, but require the glass to be peeled off.

The SIM card has fallen deep into the card reader and is fixed by the microSD contacts:

TURN OFF THE DEVICE.

At first I imagined myself as a Chinese and tried to work with toothpicks like chopsticks, but this did not give any results, the card can be moved left/right, but no more.

It is not possible to remove a stuck SIM card in the tray:

Then we decided to resort to a special tool that we would make ourselves.

To make a SIM card removal tool, we need a metal paper clip, pliers and needle files.

We need one of the staples from the paper clip, squeeze it and remove it from the plate itself:

The diameter of the staple wire must be such that it fits into the slot of the card reader, or is very close to these dimensions.

Using pliers, we give the bracket a “U” shape:

Now use files to give the shape of a hook on both ends of the staple:

And also, if necessary, we reduce the diameter or make its profile square, this makes it easier to install our device in the card receiver.

Now, using toothpicks, we position the stuck SIM card in the center of the card reader so that there is room on the sides for the hooks to enter the special tool.

We carefully insert our improvised tweezers; it should go in without effort and not push the SIM card:

We don’t insert it deeply, it’s enough for the hooks of our device to go a few millimeters further than the nearest visible part of the stuck card:

Lightly squeeze our tweezers and pull back:

After spending 30 minutes making this device, we took out the stuck SIM card in 10 seconds:

P.S. In this smartphone, it is not entirely clear how to install the tray with cards, facing you or down. To do this, there is a laser marking on the tray, although it is hard to see - FACE TO SCREEN, i.e. This part needs to be oriented towards the screen.

Installing a memory card

It is not always possible to install an SD card. Many devices do not use this feature; they already have a large supply of internal memory.

The flash drive is installed either in an additional slot or in a mixed slot. In the latter case, the tray has two unusually shaped recesses, and the user must choose whether to install one SIM card and a memory card into the device, or just two SIM cards. The second one needs to be cut to Nano.

The SD card is installed using a similar method as the SIM card. A mixed slot is marked with a standard icon; it cannot be confused. The contacts need to be directed upwards. To remove the memory module, you should remove the tray using the above method and pick up the flash drive with a paper clip or your fingernail.

Simultaneous placement of two cards and an SD drive

If the developer has not provided for such a possibility, then you can get out of the situation manually.

Remove the chip from the SIM card. To do this, you need to carefully heat the plastic on the sides until it becomes pliable, then use tweezers to pry and remove the gold microcircuit. You can use a lighter or a hair dryer;
Carefully sand the chip from the bottom side and along the edges, remove about 1-2 millimeters of plastic;
Using superglue, attach the chip to the SD drive. You need to look for additional information specifically about your SIM card. The proper placement of the chip varies among different telecom providers.

Gluing two cards is a complex process; there is a chance of breaking the flash drive, internal contacts, or even completely losing the ability to remove the tray from the device. It is safer and easier to purchase a model that has an additional memory tray instead of a mixed slot.

Installing a SIM card in a new device is no more difficult than in the previous one. Xiaomi devices are similar to each other and open using the same method. If the paperclip was lost or was not supplied, you can use a standard paperclip, first straightening one side of it.