Tips for increasing mobile Internet speed on iPhone.

The situation with the mobile network in Moscow or any city with a population of over a million is getting worse every year. An interesting fact is that this is not related to the work of telecom operators or the choice of a specific tariff. A couple of years ago it was possible to freely talk on Skype on the street, but today the iPhone does not always load even a regular web page.

The network identification icon on a smartphone can already be considered just a screen decoration. It is quite easy to understand why the Internet is slow, considering how many people today have modern mobile phones. The devices are used not only for communication, but also for surfing the World Wide Web.

The primary task of operators is to ensure good voice communication, but the issue of network connection is resolved on a residual basis. It becomes especially noticeable how 3G disappears in the city center, where there are always large crowds of people. The logical question is what to do in such situations. But there is an elegant way to increase the speed of mobile Internet on your favorite iPhone without resorting to additional installation of special equipment or antennas. To do this, you will need to use the standard settings provided on your cell phone.

How to improve modem mode on iPhone?

Setting up Tethering Mode on iPhone

Go to Settings > Cellular > Tethering

", then turn on the Allow others option.

Interesting materials:

How to switch between windows? How to switch windows using buttons? How to switch SIM cards on Redmi 9? How to switch between browser windows? How to switch between virtual desktops? How to switch the system language? How to switch the monitor to 144 Hz? How to switch to Hiragana? How to switch data transfer? How to switch sim1 to sim2?

WiFi

Now let's see why bad internet appears on the iPhone when connected to a Wi-Fi point. There are several reasons:

• Incorrect organization of your home wireless network.
• Channel reboot and signal interference.
• Connect to a slow public network.

When answering the question why the Internet does not work well on an iPhone 5S or another model, the first thing you need to understand is what network you are connected to: home or public. You can deal with problems in the operation of your home point on your own, but you will most likely have to put up with the low speed of the public network.

Setting up a home network

One of the most common reasons for poor signal and slow Internet speed is the incorrect location of the router. Without obstacles, the range of the router is approximately 150 m. Indoors, the distance is reduced to 50 m. Large physical objects can block the signal, so in distant rooms or on another floor, the Internet speed will be noticeably lower.

You can roughly understand the signal strength by looking at the connection icon in the status bar. If it is completely full, it means the phone is receiving a strong signal. If not all divisions are closed, you should consider changing the location of the router.

Even if your router is in an ideal location, signal strength can be reduced by channel congestion and interference from household appliances.

First, deal with possible overload, which often occurs in apartment buildings, where neighbors may, without knowing it, use one channel to transmit a signal. To check the status of the channels, install a special application on your smartphone - for example, WiFi Analyzer. After launching it, you will see a list of wireless points that are nearby. Look at which channel is predominantly occupied and select a different value in the router settings. The channels overlap each other, so it is best to choose a value as far away from overload as possible.

Another reason for low speed may be interference from household appliances that operate at the same frequency as the router. They do not distribute Wi-Fi, but interrupt the signal from the router. To avoid this, switch your router to the 5 GHz frequency. This, by the way, will also help solve the problem with an overloaded channel - few routers currently operate at the 5 GHz frequency, even if they have this capability.

How to understand what is loading an iPhone?

On the unlocked screen, the icon at the top constantly spins, indicating downloading from the network, and only in this position, as soon as you go into some application that is not connected to the Internet, the icon disappears. In the "Content Update" section everything is disabled.

Interesting materials:

How to check the sound on an iPhone? How does 3d Touch work on iPhone? How does iPhone 11 work? How does dictation work on iPhone? How does dual sim iPhone work? How does emergency calling work on iPhone? How does the erase iPhone function work? How does iOS 12 work on iPhone 5s? How does the iPhone X camera work? How does Life Photo work on iPhone?

Instructions for increasing speed

There are other universal ways to increase Internet speed on your phone. You should try the following:

• Reboot the gadget. Very often, this simple action helps strengthen a weak signal. The device switches to another cell tower and the problem goes away.
• Disable all automatic download programs, they consume a lot of traffic, which negatively affects the page loading time in the browser.
• Reconnect your iPhone to your Wi-Fi router or modem. Another solution to strengthening the signal may be to restart the router itself and check all network connections and cables for any damage or kinks.
• Check to see if there are any delays in paying for access to the World Wide Web. This fact may seem funny, but very often such forgetfulness becomes the reason why the Internet suddenly disappeared. The user began to frantically search for the cause of a non-existent problem.
• If possible, check whether the traffic volumes allocated per day according to the selected tariff have not been exhausted;
• Check with your provider to see if any repairs or maintenance work is being carried out. Possible causes of problems include natural phenomena and unforeseen force majeure. The technical support telephone number is located on the receipt or contract.
• When using access to the router without a password, neighbors can take advantage of this opportunity, and this greatly slows down the network. You need to make access using only a password you know and the question of how to improve the Internet on your smartphone will be solved very simply;
• One of the ways to strengthen the 3G signal on a modern phone is to search for a position with maximum proximity to the signal sources and antennas of the cellular operator. This equipment is typical and easy to find in urban areas.

If it is impossible to correct the situation using any of the listed options, you should contact the service center employees. Most likely, the problems are related to internal problems, failures in the functionality of the iPhone itself. Remember if the smartphone fell on a hard surface.

Reasons for poor mobile Internet speed on iPhone

There are several reasons why the data transfer speed within the mobile network may be unsatisfactory:

• The device is out of 4G coverage area. This case occurs if the user has traveled far outside the city or if there are obstacles in the path of signal propagation that effectively absorb radio waves (hills made of iron ore or with an abundance of groundwater, residential buildings made of metal and concrete, forests).

• Using proxy and VPN services. Such servers are used to bypass blocking, and the latter allow you to encrypt the traffic transmitted to them. However, to ensure that more users can connect, administrators often limit the bandwidth as well as the number of connections, which significantly affects the data transfer speed.

• An outdated smartphone model. In this case, the role is played by low processor performance, a small amount of RAM, slow writing/reading speed of data storage devices, etc. All this leads to delays in the exchange of information between modules, which for the end user is expressed in a banal long wait for web pages to load.
• Effect of electromagnetic interference. It sounds quite exotic, but the signal frequency in 3G\4G networks is in the gigahertz range (up to 3 GHz), in which many wireless devices operate. Despite the accuracy of determining the bandwidth for data transmission, being close to a strong electrical signal source can affect the operation of the transceiver modules.
• Violation of the network topology when placing wireless devices. One of the obvious reasons when using Wi-Fi technology may be an insufficiently strong signal from the router, which was simply installed in a place from which the radio signal does not propagate effectively.

• Noisy data transmission band. When exchanging information through a wireless access point, the 2.4 GHz band is divided into several parts, this is done using narrow-band filters and avoids additional interference. However, most modern devices are configured to automatically detect this value. A method to solve the problem can be to analyze unoccupied bands (for example, using the Wi-Fi Analyzer program) and manually set the least “clogged” range, after which the speed, as a rule, increases.

By the way! On an iPhone, you can also easily change the data standard protocol between 2G, 3G, 4G and LTE (to improve communication quality). To do this, you need to go to the settings menu, select the “Cellular Communications” section -> “Data Options” -> “Voice and Data”, select the best option.

Why does the Internet turn off during a call?

4G mobile connection (LTE) is a technology that provides only access to the mobile Internet. She cannot participate in the process of making calls. Therefore, during a conversation, the 4G mobile Internet switches to 2G or 3G. This can only be changed if you connect to a cellular operator service called VoLTE.

The VoLTE (Voice over LTE) function allows you to make voice calls using 4G, which means that:

• The subscriber can simultaneously make a call and use high-speed mobile Internet.
• The quality of speech transmission is improved.
• The subscriber can reach his interlocutor faster.

To activate VoLTE service, you need to make sure that both your smartphone and mobile operator support it.

The Internet does not work well on iOS 12. What should I do?

6 useful tips for iPhone owners.

Sometimes, after installing updates on the iPhone, Wi-Fi or the cellular network begins to work worse. iOS 12 is no exception in this regard - some users report problems with connecting to the Internet. Today we will tell you how to fix these problems without resorting to resetting to factory settings and restoring the device from a backup.

Checking the connection

First of all, make sure that the mobile Internet is turned on. For this:

1. Open iOS settings.
2. Go to the “Cellular Communications” section.
3. Move the Cellular Data slider to the On position if it was turned off.

You can also manage cellular data through the Control Center. If the icon is gray, it means there is no connection. Click on it to turn on mobile internet.

Also, make sure that airplane mode is turned off on your smartphone. When activated, all communication modules on the device stop working, so you can’t use calls, messages, or the mobile Internet.

First actions

Perhaps the problem is not global and can be solved using conventional methods. First of all, just open the additional menu - swipe it from bottom to top. Just turn off your mobile connection (or Wi-Fi) and turn it on again.

If you are connected to a WiFi network, then also reboot the router - to do this you need to turn it off and on. You can press a special button or simply unplug it from the socket and then insert it back.

If the problem is not solved, you can reset the network settings. To do this, go to the main “Settings”, then find the “General” item, go to “Reset” and press the corresponding button.

You can simply try restarting your smartphone - sometimes this helps.

If you have a thick case, or it has a mirror metal coating, then simply remove it. The fact is that such materials strongly reflect the signal from the tower and worsen the connection.

You can perform a Hard Reset or a hard reboot - this is discussed in more detail in the video below:

Reboot your iPhone

Often, rebooting helps solve problems with Wi-Fi or mobile Internet. When you turn off your iPhone, your connection to Wi-Fi networks and cell towers is lost. If the internet was slow or unavailable, rebooting may fix it.

To restart your iPhone, press and hold the Lock screen button (iPhone 8 and earlier) or the Lock screen button and one of the volume keys (iPhone X and later) until the power off slider appears. Move the slider to the right, wait until the device turns off, and then press the screen lock button again.

Hardware faults

The most unpleasant problem that an iPhone owner may encounter is damage to the communication module. If a broken SIM card can be quickly and free of charge replaced at the office of a mobile operator, then repairing or installing a new module will cost much more.

A failure of the communication module is characterized by the absence of an operator signal. Communication may be lost for the following reasons:

• damage to the transmitter power amplifier;
• antenna failure;
• failure of the SIM card holder or connector;
• damage to the radio path.

Open the iOS settings and see if there is a “Modem Firmware” item in them. Its absence indicates that the transmitter power amplifier is broken. Unfortunately, not all hardware problems are so easy to detect. To diagnose damage to the radio path, you must contact a service center. The cause of the problem may be a faulty lower cable. The problem can only be fixed at a service center by replacing the damaged component.

If the iPhone is constantly searching for a network, you should pay attention to the condition of the antenna. It may fail after the smartphone is dropped, subjected to a strong impact, or comes into contact with moisture.

Source

Reset APN settings

APN is the network settings that the user usually receives when turning on the smartphone for the first time. They come automatically. Sometimes when the system or some programs are running, they can go wrong and then the Internet disappears. You can try resetting these settings so that the operator will resend them to your phone.

1. "Settings".
2. "Cellular".
3. "Cellular data network."
4. Scroll to the bottom and press the reset button.

If after this the Internet does not work, then restart the phone. These settings can also be entered manually, but the easiest way is to call the technical support of your mobile operator and ask them to send you a file with settings that will be installed automatically.

3G or LTE does not work well

There are dozens of possible reasons why 3G or LTE on an iPhone works so poorly. But most of them have a fairly simple reason that anyone can eliminate. It is worth remembering that in the evening the connection rate decreases, which is associated with the increasing load experienced by servers and communication channels.

During this period, the number of online users who perform certain actions traditionally increases. This leads to the fact that for most users the network simply slows down, regardless of what frequency the 3g or LTE device operates at, and what tariff plan is used. Before answering the question of how you can increase the speed of mobile Internet on any iPhone, you first need to find out whether this indicator is really low or the reason is completely different. What to do in such situations?

Measuring connection speed

A program like Speedtest, available in the App Store, can help. While running the test, you must stop all other running programs and downloads. When viewing the results of the test, special attention should be paid to the load indicator. It is this indicator that is decisive when describing tariff plans. 5-10 Mbit/sec is enough for free surfing in the network space.

For those who need to improve their connection, it makes sense to upgrade to a more expensive tariff plan. It is better to test several times. The results should not differ greatly, but if this happens, wait a couple of hours and try running the test again.