No matter how reliable the protection of a smartphone is when you first install the protective glass, it will become just as dangerous if it is damaged. If your protective screen has already fulfilled its function and prevented the display from being hit or scratched, resulting in significant damage, it needs to be replaced. After you have installed the protection yourself the first time, re-applying the protective glass on your phone again will not be so difficult. Just follow all the instructions as you did when you first installed protection, performing the steps exactly.
The main problems when gluing protective glass
The first and main problem, if you need to re-glue the old protective glass of your phone, will be its removal. The complexity of the procedure lies in the need to carefully lift the protective glass, separating it from the display. In addition to the glue, the screen will be held in place due to static attraction and a tight fit.
Remove old glass carefully, without leaving small fragments. When pushing a plastic card, it will need to be stopped if even a small fragment gets caught at an angle - this threatens to damage the touchscreen.
An equally difficult problem is the presence of an adhesive base. A significant part of protective glass uses a special glue that is capable of holding the entire structure securely during the first sticker, but with each new removal, the duration and effectiveness of retention decreases.
Features of working with different models
When working with different models, the most important thing is to choose the right film size. There are several options for each model, with holes already made for the camera and microphone.
Iphone
There are a huge number of protective glasses for iPhone on sale. The first thing to do when gluing is to remove the cover. Many users forget about this. It is not recommended to purchase cases designed for other models.
Xiaomi
Protective glasses of suitable shapes are also available for sale for the Xiaomi model, but during gluing you should make sure in advance that the holes for the speaker, cameras and sensors completely match.
Meizu
Since the camera location differs in different Meizu models, you need to choose glass that is suitable for a specific model. To avoid mistakes, do a fitting before gluing.
High-quality glass for this model does not contain an adhesive layer and is fixed on the sides. Before applying it, you also need to degrease the display, but if necessary, the glass can be removed and later returned to its place.
Samsung
Glass for Samsung brand phones can be completely transparent or with a black rim around the edges. To re-glue the protection on such a phone, sometimes it is enough to simply remove the dirt.
Is it possible to re-glue the protective glass on a smartphone?
The answer to this question will depend on the quality of the product, as well as its characteristics and properties. It is not only possible, but even necessary, to re-glue the glass if it has come off or does not stick in certain places. In this case, two problems can be identified that will require different actions.
- The first problem is that it was not possible to fix it evenly the first time and you need to re-glue the protective glass exactly along the contour of the smartphone. This problem can be solved quite simply, you just need to strictly follow the detailed instructions below in the article. You can also study the visual instructions in the video, which will help you avoid most problems.
- The second problem is that the edges are not glued the first time and white stripes of unadhered protective glass remain. In order for the glass to become even and fit tightly even at the edges, you will need to use a special liquid, which is included in the package of some products from well-known brands.
An alternative to liquid for gluing along the edge of protective glass can be glycerin. It is quite easy to apply glycerin with a brush to the edges of the already fixed glass and rub it with a napkin, removing the excess to ensure fixation. Apply the liquid so as to fill all voids and grooves between the glass and the display.
Is it possible to stick it a second time?
If it was not possible to properly glue the protective coating the first time, or dust got on it, you can try to apply it again. This is possible if you follow the technique and degrease the screen well. The whole procedure takes two minutes, but in order for the glass to lie flat, there is no need to rush. The first thing you don’t need to do if the glass is crooked is to lift it with your fingernail or knife. Using tape, pry up the edge of the cover and tighten it, then the phone screen will not be damaged.
How to re-glue the protective glass on your phone: instructions
Please note that re-sticking the glass will be a little more difficult than using protective film. First of all, it is not recommended to lift this type of product only partially. You will need to completely remove the glass, and after that install it a second time exactly along the contour of the smartphone.
If you have already removed the protective glass, do not turn it over. The adhesive side should be down to prevent debris or dust from entering. Even a small particle of dust can cause problems with the sensor, damage the touchscreen, or simply leave an air bubble.
The steps to stick the glass a second time can be divided into several stages:
- Remove the cover, if present, and then remove the protection itself using a plastic spatula or card. For removal, you can use a silicone suction cup, which will allow you to conveniently remove the old glass if you simultaneously lift it with a plastic card.
- We clean the display if dust gets on it. For cleaning, use a lint-free cloth soaked in an alcohol solution. After degreasing and cleaning, you will need to wipe the display before applying the glass using a dry microfiber cloth.
- Having placed the glass at a height of 2-3 centimeters and aligned it with the smartphone, lower the protection onto the display. To apply the sticker, you just need to lightly press the glass in the center so that it sticks to the display on its own.
So, let's go, the first method:
- The first method is sugar syrup, yes, exactly sugar syrup
